Sharp DX-AT50H (serv.man3) Service Manual / Specification ▷ View online
DX-AT50
– 4 –
SPECIFICATIONS
NOTES:
1. All Items are measured without pre-emphasis unless otherwise specified.
2. Power supply : AC 230 V, 50 Hz
3. Load imp. : 100 kohm
4. Room ambient : +25
1. All Items are measured without pre-emphasis unless otherwise specified.
2. Power supply : AC 230 V, 50 Hz
3. Load imp. : 100 kohm
4. Room ambient : +25
°
C
1. Video Output
75 ohm load
75 ohm load
Vpp
1.0
ITEM
CONDITIONS
UNIT
NOMINAL
LIMIT
2. Digital Out (COAXIAL)
Vpp
0.5
3. Audio (PCM)
3-1. Output Level
1 kHz 0dB
Vrms
2.0
3-2. S/N
dB
110
3-3. Freq. Response
CD
fs=44.1 kHz 20~20 kHz
dB
±
2
3-4. THD+N
1 kHz 0dB
%
0.005
DVD
fs=48 kHz 20~22 kHz
dB
±
2
DVD player
Power source
AC 230 V, 50 Hz
Power consumption
15 W
Dimensions
Width: 215 mm (8-1/2")
Height: 58 mm (2-5/16")
Depth: 257 mm (10-1/8")
Height: 58 mm (2-5/16")
Depth: 257 mm (10-1/8")
Weight
2.0 kg (4.4 lbs.)
Signal system
PAL colour
Supported disc types
DVD (Region number 2, ALL), audio CD, CD-R, CD-RW
Video signal
Horizontal resolution: 500 lines
S/N ratio: 70 dB
Audio signal
Frequency
charactoristics
charactoristics
Linear PCM DVD:
4 Hz to 22 kHz (sampling rate:
48 kHz)
48 kHz)
4 Hz to 44 kHz (sampling rate:
96 kHz)
96 kHz)
CD: 4 Hz to 20 kHz
S/N ratio
CD: 96 dB (1 kHz)
Dynamic range
Linear PCM DVD: 95 dB
CD: 94 dB
Total harmonic
distortion ratio
distortion ratio
0.006 % maximum
Audio output
terminals
terminals
Coaxial digital output: RCA type 1
Analog output: RCA type 1 pair (L/R)
Video output
terminals
terminals
Video output: RCA type 1
S-video output: S-terminal 1
Component video output: RCA type 3
Other terminal
System control 1
Display
