DOWNLOAD Sharp DV-SV86H Service Manual ↓ Size: 1.03 MB | Pages: 28 in PDF or view online for FREE

2

1. IMPORTANT SAFEGUARDS AND  PRECAUTIONS (DV-SV80)

CAUTION
BEFORE OPERATING YOUR NEW DVD PLAYER, PLEASE CAREFULLY READ THIS OPERATION MANUAL AND THEN SAVE

IT FOR FUTURE REFERENCE AS IT WILL BE USEFUL IF YOU HAVE ANY PROBLEMS OPERATING YOUR DVD PLAYER IN

THE FUTURE.

Note:
This unit can be use only where the power supply

is AC 220V-240V, 50/60Hz. It cannot be used

elsewhere.

CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMENCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

AS THE LASER BEAM USED IN THIS DVD PLAYER

IS HARMFUL TO EYES, DO NOT ATTEMPT TO

DISASSEMBLE THE CABINET. REFER SERVICING

TO QUALIFIED PERSONEL ONLY.

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, AND ANNOYING INTERFERENCE, USE

THE RECOMMENDED ACCESSORIES ONLY.

• This DVD player is classifield as a CLASS 1 LASER

product.
• The CLASS 1 LASER PRODUCT label is located on the

rear cover.
• This product cantains a low power laser device. To ensure

continued safety do not remove any cover or attempt to gain

access   to the inside of the product. Refer all servicing to

qualified personnel.

&/ $66
/$ 6(5352'8 &7

$ 8' ,2

) 521 7

) 521 7

9,'(228 7

6& $ 57&2 11 (& 72 5

3

2.  SPECIFICATIONS

DVD/VIDEO CD/CD/CD-R/CD-RW/MP3/JPEG Player

Power Requirements:

220 – 240 ~50 Hz Auto Adjustable

Types of DiscsSupported:

DVD:

SS/SL 4.7” (DVD-5)

SS/DL 4.7” (DVD-9)
DS/SL 4.7” (DVD-10)
DS/DL 4.7” (DVD-18)
VCD
CD-DA
CD-R
CD-RW
MP-3
JPEG

Video Type

MPEG-2 Video Standard Decoding (MPEG-1 supported)
Full-Screen Video Display of 720 x 576 (PAL) & 720 x 480 (NTSC)

pixels
50 and 60 Hz frame refresh rates (PAL & NTSC)
Digital bit-stream processing rate up to 108Mbits/sec
Line resolution more than 500 lines

Video Output

Analog Video:
(With using 6 x 10-bits / 27MHz video DACs)
CVBS: PAL / NTSC (Negative synchronised ), 1Vpp @ 75W (loaded)
S-VIDEO: 1Vpp @ 75W (loaded), c AT 0-286 Vpp (NTSC)
0-300Vpp

(PAL) (loaded)

or
Through 4-pin MiniDIN S-VIDEO connector
RGB + CVBS: Through Full Euroscart Output (Pin-8 Control)

Audio Type

Dolby Digital out and Downmix
LPCM
DTS Digital out

Audio Output

Digital Audio Outputs:
IEC 958
TOSLINK
Analog Outputs:
24 Bit/ 96, 48, 44 1kHz down-sampling DAC
2 RCA jack outputs (Left / Right)
Left / Right audio outputs of Full Euroscart
Output / Channel: 2 Vrms (0 dB fs, 1kHz)2.

4

3.GENERAL  DESCRIPTION

3.1.  MT1379

The MT1379 Progressive Scan DVD-Player Combo Chip is a single-chip MPEG video decoding chip that integrates audio/video

stream data processing, TV encoder, four video DACs with Macrovision. copy protection, DVD system navigation, system control

and housekeeping functions.

The features of this chip can be listed as follows:

General Features:
• Progressive scan DVD-player combo chip
• Integrated NTSC/PAL encoder.
• Built-in progressive video output
• DVD-Video, VCD 1.1, 2.0, and SVCD
• Unified track buffer and A/V decoding buffer.
• Direct interface of  32-bit SDRAM.
• Servo controller and data channel processing.

Video Related Features:
• Macrovision 7.1 for NTSC/PAL interlaced video.
• Simultaneous composite video and S-video outputs, or composite and YUV outputs, or composite and RGB outputs.
• 8-bit CCIR 601 YUV 4:2:2 output.
• Decodes MPEG video and MPEG2 main profile at main level.
• Maximum input bit rate of 15Mbits/sec

Audio Related Features:
• Dolby Digital (AC-3) and Dolby Pro Logic
• Dolby Digital S/PDIF digital audio output
• High-Definition Compatible Digital. (HDCD) decoding
• Dolby Digital Class A and HDCD certified
• SRS TrueSurround
• CD-DA
• MP3

5

3.2.  MEMORY

3.2.1. S DRAM MEMORY INTERFACE

The MT1379 provides a glueless 16-bit interface to DRAM memory devices used as OSD, MPEG stream and video buffer

memory for a DVD player. The maximum amount of memory supported is 16 MB of Synchronous DRAM (SDRAM). The memory

interface is configurable in depth to support 128-Mb addressing. The memory interface controls access to both external SDRAM

memories, which can be the sole unified external read/write memory acting as program and data memory as well as various

decoding and display buffers.

3.3.  DRIVE  INTERFACES

The MT1379 supports the DV34 interface, and other RF and servo interfaces used by many types of DVD loaders. These

interfaces meet the specifications of many DVD loader manufacturers.

3.4. FRONT PANEL

The front panel is based around an Futaba VFD and a common NEC front panel controller chip, (uPD16311). The MT1379

controls the uPD16311 using several control signals, (clock, data, chip select). The infrared remote control signal is passed

directly to the MT1379 for decoding.

3.5. REAR PANEL

A typical rear panel is included in the reference design. This rear panel supports:

• Six channel or two channel audio outputs
• Optical and coax S/PDIF outputs.
• Composite, S-Video, and SCART outputs

The six-video signals used to provide CVBS, S-Video, and RGB are generated by the MT1379’s internal video DAC. The video

signals are buffered by external circuitry.

Six channel audio output by the MT1379 in the form of three I2S (or similar) data streams. The S/PDIF serial stream is also

generated by the MT1379 output by the rear panel. The six channel audio DACs (AK4356,PCM1606) are used for six channel

audio output with MT1379, and similarly AK4382A ,CS4392 Audio DACs are used for two channel audio output with MT1379.