DOWNLOAD Sharp DV-RW360H (serv.man10) Service Manual ↓ Size: 12.13 MB | Pages: 100 in PDF or view online for FREE

33

EN

MENU LIST

TOP MENU

STOP

PLAY

FWD

REV

SKIP

PROG.

CLEAR/C-RESET

VCR

REC/OTR

DVD

REC/OTR

PQRS

TUV

WXYZ

GHI

JKL

MNO

.@/:

ABC

DEF

SPACE

DISPLAY

ENTER

ZOOM

REC MODE

VCR

RAPID PLAY

DVD

CM SKIP

SETUP

T-SET

    OPEN/CLOSE

EJECT

TIMER PROG.

DUBBING

RETURN

OPERATE

In the following example, No. 
5 timer programming overlaps 
on No. 1 and No. 6 timer 
programmes. In such a case, you 
should correct the programme 
time to clear the overlap.

Press [TIMER PROG.].
Timer Programming list will 
appear.

To clear the timer program-
ming, select the desired pro-
gramme using [Cursor K / L], 
then press [CLEAR/C-RESET].
To correct the timer program-
ming
1) Select the desired programme 

using [Cursor K / L], then 
press [ENTER].

2) Correct the timer programming 

using [Cursor K / L / { / B].

3) Press  [ENTER] again.

Press [T-SET] to return to the 
timer-standby mode.
To check the timer program-
ming in process
Press [TIMER PROG.].

•  If a timer recording is 

proceeding, that programme 
is highlighted in red. In such 
a case, you cannot select any 
other programmes.

•  When you check the timer 

programming in progress 
by pressing [TIMER PROG.] 
during operations of the 
component (VCR or DVD) 
which is not currently used 
for the timer recording, 
the programme will not be 
highlighted. In this case, 
you cannot select other 
programmings.

Press [STOP C] to stop the disc recording or [STOP C/EJECT A] to 
stop the tape recording on the front panel of the unit.

•  [STOP C] on the remote 

control is not effective.

The error number appears on the 
Timer Programming list.

The error programme will be 
displayed in grey with an asterisk 
and have an error number.
The error programme will be 
deleted once you check the error 
in the programme list, or once 
you cancel the timer-standby 
mode and re-enter it.
Press [CLEAR/C-RESET] to erase 
the selected programme.

E1-22 
E37-39

Recording error

E23-24

Unrecordable disc

E25

•  Copy prohibited programme
•  Cannot record because of the 

NTSC / PAL-60 signal is received.

E26-28

Copy prohibited programme

E29

Disc protected

E30

Disc full

E31

Already recorded 99 titles (Video 
mode)

E32

Already recorded 99 titles (VR 
mode)

E33

Already recorded 999 chapters

E34

No space for Control information

E35

PCA (Power Calibration Area) full

E36

Already finalised Video format disc

E40

•  There are some unrecorded 

parts due the overlapped timer 
programmes.

•  Recording did not start at the 

start time.

•  There is no tape in the cassette 

compartment.

•  Tape recording reaches to 

the tape end during timer 
recording.

E41

Power failure

E42

No disc

34

EN

If the starting time is same:
•  The timer programming set first (PROG. 1) has 

priority.

Additional 30 seconds (at the most) are cut off.

PROG. 2 recording will start after PROG. 1 recording 
is completed.

If programming has been made at the end of 
the programming (PROG. 1) currently being 
recorded:
•  The timer programming set first (PROG. 2) has 

priority. PROG. 3 will not be recorded.

Additional 30 seconds (at the most) are cut off.

PROG. 2 recording will start after PROG. 1 recording 
is completed.

If the recording time is partially overlapped:
•  The timer programming with the earlier start 

time (PROG. 2) has priority. PROG. 1 will start after 
PROG. 2 recording is completed.

Additional 30 seconds (at the most) are cut off.

If the recording time entirely overlaps:
•  The shorter timer programming (PROG. 1) is not 

recorded.

•  If there is a power failure or the unit is unplugged for 

more than 1 hour, the clock setting and all timer settings 
will be lost.

•  If there is no disc or an unrecordable disc in the tray, the 

icon will flash and the timer recording will not occur. 

Insert a recordable disc.

•  If there is no tape or a tape with a record tab is not in 

the cassette compartment, the VCR indicator on the 
front panel flashes and the timer recording cannot be 
performed. Please insert a recordable tape.

•  When all timer recordings are complete, the 

icon 

flashes. To play back or eject the recorded disc, press 
[T-SET], and then press [PLAY B] or [OPEN/CLOSE 
EJECT A].

•  The timer recording cannot be performed in DVD and 

VCR at the same time. If you set two programmings with 
the same channel and time both in DVD and VCR, the 
programming that has priority will be recorded.

•  You cannot make any DVD operation during DVD timer 

recording.

•  You cannot make any VCR operation during VCR timer 

recording.

•  If the Start and End times are same, the length of the 

recording will be set for 24 hours. If the disc or tape 
becomes full during recording, the unit will turn itself 
off. To continue recording, press [T-SET] to cancel the 
timer-standby mode, insert a recordable disc or tape and 
press [T-SET] again.

•  If two or more programmes overlap, “Overlap” and the 

overlapped programme number will appear on the 
display.

•  If the Start time is earlier and the End time is later than 

the current time, the recording will start immediately 
after you press [T-SET].

•  If a videotape ends during the timer recording, the unit 

will automatically stop, eject the videotape, and turn 
itself off. To continue recording, insert a recordable tape.

•  If the recording time of two programmes overlap, or the End time of a programme and the Start time of 

another is same, the first 30 seconds (at the most) of the subsequent programme are cut off.

If the End time of the programme currently being 
recorded and the Start time of the subsequent pro-
gramme are same:
•  If PROG. 1 is a DVD recorded programme, the 

beginning of PROG. 2 may be cut off.

*  If the cut off time exceeds 1 minute, the error number 

“E40” will appear in the Timer Programming list.

The first 30 seconds (at the most) are cut off.*

Priority of overlapped settings
The unit records programmes according to prior ity if the timer programmes overlap.

35

EN

You can set the unit to start 
recording whenever it detects 
the video signal from the external 
tuner.
Preparing for the Satellite Link 
Timer Recording:

Preparation on the tuner
•  The external tuner should be 

equipped with some kind of 
timer function. Using timer 
function of the tuner, set it to 
be turned on when it comes 
to the time you want to start 
recording, and off when it 
comes to the time you want to 
finish recording. (Refer to the 
tuner’s manual on how to set 
the timer.)

•  Make sure to turn the power off 

when you finish setting.

Preparation on this unit
•  Make sure to select the desired 

Recording mode beforehand.

External tuner

(commercially available)

Scart cable 

(commercially available)

Select “Recording” using 
[Cursor K / L], then press 
[ENTER].

AUDIO

REPEAT

PAUSE

SEARCH

SLOW

MENU LIST

TOP MENU

STOP

PLAY

FWD

REV

SKIP

PROG.

CLEAR/C-RESET

VCR

REC/OTR

DVD

REC/OTR

PQRS

TUV

WXYZ

GHI

JKL

MNO

.@/:

ABC

DEF

SPACE

DISPLAY

ENTER

ZOOM

REC MODE

VCR

RAPID PLAY

DVD

CM SKIP

SETUP

T-SET

    OPEN/CLOSE

EJECT

TIMER PROG.

DUBBING

VCR/DVD RECORDER

COMBINATION

NB203ED

RETURN

OPERATE

Select “Satellite Link” using 
[Cursor K / L], then press 
[ENTER].
Setting menu will appear.

Select the time, media and 
recording mode using [Cursor 
K

 / L], then press [ENTER].

Set the desired start time 
using [Cursor K / L], then press 
[Cursor B].
•  The hour can be selected 

among 0-23.

•  Repeat procedures in step 5 to 

set the desired minutes.

•  If you wish to go back to the 

left, press [Cursor {].

Select the recording media 
using [Cursor K / L], then press 
[Cursor B].

Select the recording mode 
using [Cursor K / L].
See page 24 for details.

Press [ENTER].
“To Standby Mode” is highlighted.

Press [ENTER] again.
In a second, the unit will be 
turned off automatically as 
it goes into the Satellite Link 
standby mode.
•  Until the time you set in “Start”, 

the clock will appear on the 
front panel.

•  “Sat” will appear on the front 

panel display at the start time.

To cancel the Satellite Link 
function while in the Satellite 
Link standby mode:
Press [T-SET] to turn on the unit.
To cancel the Satellite Link 
function while the Satellite Link 
Recording is in progress:
Press [STOP C] on the front panel 
of the unit.

36

EN

•  If you have not set the clock, the clock setting window will appear at step 3. Follow to step 4 in “Clock 

Setting” on page 22.

•  You cannot set the End time for the Satellite Link Timer Recording on this unit.
•  Recording picture will be distorted if the copy protection signal is being detected during Satellite Link 

Timer Recording.

•  When a regular Timer Recording and the Satellite Link Timer Recording are overlapped, those 

recordings are recorded as illustrated below.

Example 2

Actual
Recording

Timer
Recording

Satellite Link

Example 3

Actual
Recording

Timer
Recording

Satellite Link

Example 1

Timer
Recording

Actual
Recording

Satellite Link

Connect the external equipment 
using either the input terminals, 
AV1, AV2, (Rear) or AV3 (Front). 
However, for AV3 jacks, you 
have to select S-INPUT or VIDEO 
input jacks depending on the 
connected devices.
Use a commercially available 
Scart, S-Video or Video cable 
and an Audio cable for this 
connection.

Select “Required Setting” 
using [Cursor K / L], then press 
[ENTER].

Select “Select Video” using 
[Cursor K / L], then press 
[ENTER].

Select the input jack type to be 
used using [Cursor K / L], then 
press [ENTER].
•  If you want to use VIDEO input 

jack (Composite), select “Video 
In”.

•  If you want to use S-INPUT jack, 

select “S-Video In”.

AUDIO

REPEAT

PAUSE

SEARCH

SLOW

MENU LIST

TOP MENU

STOP

PLAY

FWD

REV

SKIP

PROG.

CLEAR/C-RESET

VCR

REC/OTR

DVD

REC/OTR

PQRS

TUV

WXYZ

GHI

JKL

MNO

.@/:

ABC

DEF

SPACE

DISPLAY

ENTER

ZOOM

REC MODE

VCR

RAPID PLAY

DVD

CM SKIP

SETUP

T-SET

    OPEN/CLOSE

EJECT

TIMER PROG.

DUBBING

VCR/DVD RECORDER

COMBINATION

NB203ED

RETURN

OPERATE