Sharp DV-NC65H (serv.man28) User Manual / Operation Manual ▷ View online
www.sharp.co.uk/support
47
DVD Setup
3
Use ' or " to select “BITSTREAM” or “D-PCM”.
BITSTREAM:
Use this setting for a digital connection of a receiver
(amplifier) equipped with a Dolby Digital decoder.
(amplifier) equipped with a Dolby Digital decoder.
D-PCM:
Use this setting for a digital connection to the
(Down Mix PCM)
PCM digital input jack of a DAT or MD, or for a digital
connection to a receiver (amplifier) that does not have
a Dolby Digital decoder.
connection to a receiver (amplifier) that does not have
a Dolby Digital decoder.
4
Press ENTER to confirm the setting.
5
Press RETURN to exit the SETUP screen and return to normal
screen.
• When you have completed the above setting, press RETURN to exit
screen.
• When you have completed the above setting, press RETURN to exit
the SETUP screen. However, if you want to specify the “MPEG”
setting in succession, proceed to step 1 below.
setting in succession, proceed to step 1 below.
Setting the MPEG
Selected the same as “COMPRESSION” on page 45 for MPEG signals.
1
Press ENTER and then use ' or " to select “MPEG”.
2
Press ENTER to display the settings you can select.
3
Use ' or " to select “BITSTREAM” or “PCM”.
BITSTREAM: Use this setting for a digital connection of a receiver
(amplifier) equipped with an MPEG Audio decoder.
PCM:
Use this setting for a digital connection to the PCM
digital input jack of a DAT or MD, or for a digital
connection to a receiver (amplifier) that does not have
an MPEG Audio decoder.
digital input jack of a DAT or MD, or for a digital
connection to a receiver (amplifier) that does not have
an MPEG Audio decoder.
4
Press ENTER to confirm the setting.
5
Press RETURN to exit the SETUP screen and return to normal
screen.
• If you want to go on and specify other settings, use ' or " to
screen.
• If you want to go on and specify other settings, use ' or " to
display the other SETUP screen without pressing RETURN.
When playing a disc recorded using DTS, the bitstream type signal is
output regardless of the setting of “ Digital” and “MPEG”.
output regardless of the setting of “ Digital” and “MPEG”.
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
AUDIO
BITSTREAM
PCM
PCM
MPEG
•
When audio CD’s that support MPEG are played back, BITSTREAM signals will be output, even if
“MPEG” has been set to “PCM”.
“MPEG” has been set to “PCM”.
•
Make sure to set “DIGITAL” or “MPEG” to “PCM” when making a digital connection to 2 channel audio equipment or
MD. Leaving on “BITSTREAM” may cause static noise and damage the speakers as well as incorrect recording on
MD’s.
MD’s.
DVNC65H043_048.pm6
30/8/02, 11:39 am
47
48
www.sharp.co.uk/support
DVD Setup
Setting the CINEMA VOICE
This function raises the sound of the centre speaker to make the
voices in a movie easier to hear.
voices in a movie easier to hear.
• Before setting the “CINEMA VOICE”, perform steps 1 and 2 from
pages 45 to 46.
1
Press ENTER and then use ' or " to select “CINEMA VOICE”.
2
Press ENTER to display the settings you can select.
3
Use ' or " to select “ON” or “OFF”.
ON:
Set to “ON” when you want to raise the sound of
the voice.
the voice.
OFF:
Set to “OFF” when you do want to use this
function.
function.
4
Press ENTER to confirm the setting.
5
When you have completed the setting above, press RETURN to
return to the SETUP screen. However, if you want to go on and
specify other settings, use ' or " to display other setting
screens.
return to the SETUP screen. However, if you want to go on and
specify other settings, use ' or " to display other setting
screens.
•
The CINEMA VOICE setting raises the sound of the centre
channel. It does not affect the voices in other channels.
channel. It does not affect the voices in other channels.
•
Even if this function is set to “ON”, the results may or may not
be effective, depending on the disc.
be effective, depending on the disc.
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
AUDIO
CINEMA VOICE
ON
OFF
CINEMA VOICE
ON
OFF
DVNC65H043_048.pm6
30/8/02, 11:39 am
48
49
www.sharp.co.uk/support
DVD Setup
DISC LANGUAGE Setting
Use this setting for selecting the language for subtitles, audio tracks
and disc menu.
and disc menu.
• Note that the language you select is not displayed or does
not sound if it is not recorded on the disc you are playing.
• With some discs, it is intentionally disabled by the disc manufacturer
to change the language of the subtitle, audio track and disc menu
through this SETUP screen. When playing such discs, try using
FUNCTION CONTROL (pages 81 and 85) or, if applicable, use the
menu that appears on the DVD.
through this SETUP screen. When playing such discs, try using
FUNCTION CONTROL (pages 81 and 85) or, if applicable, use the
menu that appears on the DVD.
Setting SUB TITLE, AUDIO and MENU
languages.
languages.
Preparation
• Press OPERATE. Then move the VCR/DVD CHANGE Switch to DVD.
• Press OPERATE. Then move the VCR/DVD CHANGE Switch to DVD.
1
Press DVD SETUP to display the SETUP screen.
2
Use ' or " to select the “
DISC LANGUAGE”.
TV MODE
PARENTAL
PARENTAL
LEVEL 8
AUDIO
DISC LANGUAGE
DISC LANGUAGE
3
Press ENTER and then use ' or " to select “AUDIO”,
“SUB TITLE” or “MENU”.
• You can set “AUDIO”, “SUB TITLE” or “MENU” individually.
(Example) Selecting “AUDIO”
“SUB TITLE” or “MENU”.
• You can set “AUDIO”, “SUB TITLE” or “MENU” individually.
(Example) Selecting “AUDIO”
DISC LANGUAGE
AUDIO
AUDIO
ENGLISH
SUB TITLE
ENGLISH
MENU
ENGLISH
4
After selecting the item, press ENTER.
5
Select the language you want to use with ', ", \ and |.
(Example) Selecting “FRENCH”
AUDIO
ENGLISH
ENGLISH
CHINESE
SPANISH
SWEDISH
FRENCH
DUTCH
ITALIAN
OTHER
GERMAN
• If you want to use any languages which are not on the
OSD, proceed to step 1 under “Selecting languages from
OTHER” on next page.
OTHER” on next page.
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
DVNC65H049_050.pm6
30/8/02, 11:41 am
49
50
www.sharp.co.uk/support
DVD Setup
6
Press ENTER to confirm the setting.
7
Repeat steps 4 to 7 above to go on with other “DISC
LANGUAGE” settings in succession.
LANGUAGE” settings in succession.
8
If you want to exit the SETUP screen and return to the normal
screen, press RETURN.
• If you want to go on and specify other settings, press ' or "
screen, press RETURN.
• If you want to go on and specify other settings, press ' or "
to display other SETUP screen without pressing RETURN.
Selecting languages from OTHER
1
Select “OTHER” with ', ", \ and |, then press ENTER to set
the “OTHER” input item (two letters).
• See Language Code List for Disc Language on page 52
when selecting the code.
the “OTHER” input item (two letters).
• See Language Code List for Disc Language on page 52
when selecting the code.
(Example) Selecting “OTHER” in “AUDIO”
OTHER
AUDIO
AUDIO
1
E
AUDIO
2
N
• The “SUB TITLE” and “MENU” screens are displayed
respectively when being set.
respectively when being set.
2
Press \ or | to select the alphabet as the first letter on
“AUDIO 1” (upper side).
“AUDIO 1” (upper side).
3
Press " to move the cursor to “AUDIO 2” (lower side).
4
Press \ or | to select the alphabet as the second letter.
5
Press ENTER to confirm the setting.
• Press RETURN to return to the previous screen.
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
VIDEO Plus+
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
RRMCGA069WJSA
OTHER
AUDIO
AUDIO
1
A
AUDIO
2
F
DVNC65H049_050.pm6
30/8/02, 11:41 am
50
Click on the first or last page to see other DV-NC65H (serv.man28) service manuals if exist.