Sharp DV-NC55 (serv.man56) User Manual / Operation Manual ▷ View online
21
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
DVD Audio Connections
Connecting a TV Equipped with S-VIDEO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector
to the Unit, you should use an S-VIDEO lead (commercially available) to connect the TV to the Unit.
to the Unit, you should use an S-VIDEO lead (commercially available) to connect the TV to the Unit.
Connecting to Audio Equipment
Connecting the Unit to audio equipment provides normal stereo sound plus powerful stereo sound enhanced
by Dolby Digital (5.1 channel), DTS, and MPEG Audio.
by Dolby Digital (5.1 channel), DTS, and MPEG Audio.
Playing 2 channel audio
■ Analogue Connection
LINE 1(TV)
VIDEO
S-VIDEO
RGB
LINE 2
S-VIDEO
OUTPUT SELECTOR
DIGITAL
AUDIO
DVD OUT
AUDIO
L
R
VIDEO
VCR/DVD OUT
AUDIO
L
R
ANALOG INPUT
L
R
ANTENNA
OUT
IN
INPUT
S-VIDEO
TV (with external input jacks)
To AUDIO
OUT jacks
OUT jacks
VIDEO/AUDIO lead
(commercially available)
(commercially available)
(White)
(Red)
To amplifier
audio input jacks
audio input jacks
Jack and Plug Colours
Audio Left: White
Audio Right: Red
Audio Right: Red
Amplifier of stereo system, etc.
(White)
(Red)
This Unit
To S-VIDEO
input jack
input jack
S-VIDEO lead
(commercially available)
(commercially available)
To S-VIDEO
OUT jack
OUT jack
---- or ----
Required lead
VIDEO/AUDIO lead (commercially available)
White (L)
Red (R)
White (L)
Red (R)
S-VIDEO lead (commercially available)
If the Unit is set to OPERATE ON, the DVD signals will be output from the DVD OUT jacks at all times.
(The DVD signals will be output from the DVD OUT jacks also when using the VCR.)
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
21
22
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/
DTS/MPEG Audio surround processor to your Unit’s coaxial digital jack provides richer and more powerful
audio play.
DTS/MPEG Audio surround processor to your Unit’s coaxial digital jack provides richer and more powerful
audio play.
• This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial
digital input jack.
■ Connection to a processor or amplifier with a coaxial digital input jack
DIGITAL IN
COAXIAL
LINE 1(TV)
VIDEO
S-VIDEO
RGB
LINE 2
S-VIDEO
OUTPUT SELECTOR
DIGITAL
AUDIO
DVD OUT
AUDIO
L
R
VIDEO
VCR/DVD OUT
AUDIO
L
R
ANTENNA
OUT
IN
Required lead
Coaxial digital lead (commercially available)
To coaxial
DIGITAL OUT jack
DIGITAL OUT jack
To coaxial
digital input jack
digital input jack
Coaxial digital lead
(commercially available)
(commercially available)
You can make this connection
using either a coaxial digital
using either a coaxial digital
lead
.
This Unit
Audio equipment
DVD Audio Connections
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs such as these is
digitally recorded by connecting the Unit directly to a digital recorder (such as an MD player), the music may be
recorded continuously and track numbers may be lost.
digitally recorded by connecting the Unit directly to a digital recorder (such as an MD player), the music may be
recorded continuously and track numbers may be lost.
■ Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD
• Audio CD
Play the disc as you normally would, with the audio mode set to “L+R” (see page 84). With a digital
connection, audio of a disc recorded with DTS sounds abnormal in this case.
connection, audio of a disc recorded with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded with Dolby Digital (5.1 channel),
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
22
23
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
This Unit automatically tunes the TV channels for your area, then
using Teletext information sorts the TV channels into a standard
order and sets the clock. If the Unit has not previously been tuned-in,
instructions will be given on screen to guide you through this proce-
dure.
using Teletext information sorts the TV channels into a standard
order and sets the clock. If the Unit has not previously been tuned-in,
instructions will be given on screen to guide you through this proce-
dure.
1
Press OPERATE.
2
The screen below should now be displayed on your TV screen.
AUTO INSTALLATION
PRESS SET KEY TO START
SET :ENTER MENU:EXIT
• If the AUTO INSTALLATION screen does not appear when you switch on
your VCR or you wish to reset your Unit and start the installation again,
refer to VCR RESET on page 35.
refer to VCR RESET on page 35.
3
Press SET to continue with the installation.
4
Ensure your Aerial/Scart cables are connected to your Unit and
then press SET to confirm.
then press SET to confirm.
PLEASE BE SURE THE
AERIAL/SCART CABLE IS
AERIAL/SCART CABLE IS
CONNECTED TO YOUR VCR.
PRESS SET TO CONTINUE
SET :ENTER MENU:EXIT
5
All available terrestrial channels will be automatically installed.
(Auto install may take a few minutes.)
(Auto install may take a few minutes.)
1 CH22
AUTOMATIC TUNING.
PLEASE WAIT.
SET :ENTER MENU:EXIT
6
Once Auto Installation is complete, the MOVE menu screen will
appear showing all the channels the Unit was able to tune in.
VCR Auto Installation
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
PLUSCODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
23
24
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
7
If you wish to move any channels, press ' / " / \
\
\
\
\ / |
|
|
|
| to
highlight the channel to be moved. Then press SET to confirm.
MOVE 1/5
1
CH50
7 13
2BBC1 8 14
3BBC2 9 15
3BBC2 9 15
4
ITV
10 16
5CH4 11 17
6CH5
12 18
:SELECT
SET :ENTER MENU:EXIT
8
Press ' / " / \
\
\
\
\ / |
|
|
|
| to highlight the new position for the channel.
Then press SET to confirm.
MOVE 1/5
1BBC1 7 13
2BBC2 8 14
3
2BBC2 8 14
3
ITV
9 15
4CH4 10 16
5CH5 11 17
5CH5 11 17
6
CH50
12 18
:SELECT
SET :ENTER MENU:EXIT
9
If any more channels are to be moved, repeat this procedure
from step 7.
10
Press VCR MENU to exit if you are satisfied with the channel
order.
• The correct time and date should now be displayed on your
TV screen for approximately 2 seconds. If the clock is not
automatically set, the “CLOCK” screen will appear. Refer to
Manual Clock Setting on page 33.
automatically set, the “CLOCK” screen will appear. Refer to
Manual Clock Setting on page 33.
TIME DATE YEAR
11:03AM 19/02 01
11:03AM 19/02 01
VCR Auto Installation
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
PLUSCODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
24
Click on the first or last page to see other DV-NC55 (serv.man56) service manuals if exist.