Sharp DV-NC55 (serv.man50) User Manual / Operation Manual ▷ View online
19
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
Connecting a TV with LINE 1 (TV) Output and LINE 2 Input SCARTS
Use the SCART leads (one SCART lead: supplied) to connect the Unit to your TV and VCR.
LINE 1(TV)
VIDEO
S-VIDEO
RGB
LINE 2
S-VIDEO
OUTPUT SELECTOR
DIGITAL
AUDIO
DVD OUT
AUDIO
L
R
VIDEO
VCR/DVD OUT
AUDIO
L
R
TV
DECORDER
This Unit
To SCART
output
output
To LINE 2
SCART
SCART
To LINE 1 (TV)
SCART
SCART
Change the position according to
the signal type (VIDEO/S-VIDEO/
RGB) that is output to TV during
DVD playback.
the signal type (VIDEO/S-VIDEO/
RGB) that is output to TV during
DVD playback.
To SCART
input
input
SCART OUTPUT
ANTENNA
OUT
IN
VCR/DVD OUT jacks can be used instead of
LINE 1(TV), depending on your TV.
LINE 1(TV), depending on your TV.
The factory default setting for the OUTPUT SELECTOR is “VIDEO”. If your TV supports the higher quality
modes S-VIDEO or RGB via the SCART, then please set the selector for your preference.
modes S-VIDEO or RGB via the SCART, then please set the selector for your preference.
Required leads
SCART lead (the other SCART
lead: commercially available)
lead: commercially available)
SCART lead (one SCART lead:
supplied)
supplied)
: Signal flow
CONNECTION AND
INITIAL SETTINGS
Basic Connection
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
19
20
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
Basic Connection
• You will not be able to hear all of the sound being output by the Unit if you use the VIDEO/AUDIO lead
shown above to a monaural TV that has only one AUDIO input jack.
• Be sure that the colours of the jacks and plugs match up when connecting the lead.
• Connect the Unit directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection
function will scramble the picture.
• If you want to listen to the audio through audio equipment, connect only VIDEO lead to the TV.
Connecting a TV Equipped with VIDEO/AUDIO Input Jacks
VIDEO
IN
AUDIO
IN
L
R
(White)
(Red)
(Yellow)
LINE 1(TV)
VIDEO
S-VIDEO
RGB
LINE 2
S-VIDEO
OUTPUT SELECTOR
DIGITAL
AUDIO
DVD OUT
AUDIO
L
R
VIDEO
VCR/DVD OUT
AUDIO
L
R
Yellow
White (L)
Red (R)
Yellow
White (L)
Red (R)
Required leads
VIDEO/AUDIO lead
(commercially available)
Jack and Plug Colours
Video: Yellow
Audio Left: White
Audio Right: Red
Audio Left: White
Audio Right: Red
To VIDEO/AUDIO
OUT jacks
OUT jacks
VIDEO/AUDIO lead
(commercially available)
(commercially available)
To VIDEO/AUDIO
input jacks
input jacks
TV (with external input jacks)
(White) (Red)
(Yellow)
This Unit
ANTENNA
OUT
IN
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
20
21
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
DVD Audio Connections
Connecting a TV Equipped with S-VIDEO Input Jacks
When you want to achieve a better video image by connecting a TV equipped with an S-VIDEO input connector
to the Unit, you should use an S-VIDEO lead (commercially available) to connect the TV to the Unit.
to the Unit, you should use an S-VIDEO lead (commercially available) to connect the TV to the Unit.
Connecting to Audio Equipment
Connecting the Unit to audio equipment provides normal stereo sound plus powerful stereo sound enhanced
by Dolby Digital (5.1 channel), DTS, and MPEG Audio.
by Dolby Digital (5.1 channel), DTS, and MPEG Audio.
Playing 2 channel audio
■ Analogue Connection
LINE 1(TV)
VIDEO
S-VIDEO
RGB
LINE 2
S-VIDEO
OUTPUT SELECTOR
DIGITAL
AUDIO
DVD OUT
AUDIO
L
R
VIDEO
VCR/DVD OUT
AUDIO
L
R
ANALOG INPUT
L
R
ANTENNA
OUT
IN
INPUT
S-VIDEO
TV (with external input jacks)
To AUDIO
OUT jacks
OUT jacks
VIDEO/AUDIO lead
(commercially available)
(commercially available)
(White)
(Red)
To amplifier
audio input jacks
audio input jacks
Jack and Plug Colours
Audio Left: White
Audio Right: Red
Audio Right: Red
Amplifier of stereo system, etc.
(White)
(Red)
This Unit
To S-VIDEO
input jack
input jack
S-VIDEO lead
(commercially available)
(commercially available)
To S-VIDEO
OUT jack
OUT jack
---- or ----
Required lead
VIDEO/AUDIO lead (commercially available)
White (L)
Red (R)
White (L)
Red (R)
S-VIDEO lead (commercially available)
If the Unit is set to OPERATE ON, the DVD signals will be output from the DVD OUT jacks at all times.
(The DVD signals will be output from the DVD OUT jacks also when using the VCR.)
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
21
22
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/
DTS/MPEG Audio surround processor to your Unit’s coaxial digital jack provides richer and more powerful
audio play.
DTS/MPEG Audio surround processor to your Unit’s coaxial digital jack provides richer and more powerful
audio play.
• This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial
digital input jack.
■ Connection to a processor or amplifier with a coaxial digital input jack
DIGITAL IN
COAXIAL
LINE 1(TV)
VIDEO
S-VIDEO
RGB
LINE 2
S-VIDEO
OUTPUT SELECTOR
DIGITAL
AUDIO
DVD OUT
AUDIO
L
R
VIDEO
VCR/DVD OUT
AUDIO
L
R
ANTENNA
OUT
IN
Required lead
Coaxial digital lead (commercially available)
To coaxial
DIGITAL OUT jack
DIGITAL OUT jack
To coaxial
digital input jack
digital input jack
Coaxial digital lead
(commercially available)
(commercially available)
You can make this connection
using either a coaxial digital
using either a coaxial digital
lead
.
This Unit
Audio equipment
DVD Audio Connections
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs such as these is
digitally recorded by connecting the Unit directly to a digital recorder (such as an MD player), the music may be
recorded continuously and track numbers may be lost.
digitally recorded by connecting the Unit directly to a digital recorder (such as an MD player), the music may be
recorded continuously and track numbers may be lost.
■ Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD
• Audio CD
Play the disc as you normally would, with the audio mode set to “L+R” (see page 84). With a digital
connection, audio of a disc recorded with DTS sounds abnormal in this case.
connection, audio of a disc recorded with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded with Dolby Digital (5.1 channel),
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
22
Display