DOWNLOAD Sharp DV-NC100H (serv.man8) Service Manual ↓ Size: 1.52 MB | Pages: 32 in PDF or view online for FREE

– 21 –

EN

During playback, press FFg or REWh repeatedly to
select the required forward or reverse speed.

• For DVDs, fast forward or reverse search speed is dif-

ferent depending on the disc. Approximate speed is 1
(x2), 2(x8), 3 (x50), and 4 (x100).

• For Video CDs, fast forward or reverse search speed is

different depending on the disc. Approximate speed is
1(x2), 2(x8), 3(x30).

• For Audio CDs, the approximate speed is x16.
• For MP3, the approximate speed is x8.
• If you are using FFg or REWh on the front panel,

press and hold it for more than 1.5 seconds. When you
reach the desired speed, release the button.

To return to normal playback, press PLAY.

During playback, press STILL/PAUSE.

Press FFg or REWh.

• Slow motion playback will begin and sound will be

muted.

Press FFg or REWh repeatedly to select the
required speed.

• Slow forward or reverse speed is different depending

on the disc. Approximate speed is 1 (1/16), 2 (1/8), and
3 (1/2).

• If you are using FF g or REW h on the front

panel, press and hold it for more than 1.5 seconds.
When you reach the desired speed, release the button.

To return to normal playback, press PLAY.

• Set STILL MODE to FIELD on the Display menu if pic-

tures in the slow playback mode are blurred. (Refer to
page 27.)

• You cannot play Video CDs in reverse slow motion.

The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.

Press ZOOM during playback.

• Playback will continue.

Press ZOOM repeatedly to select the required zoom fac-
tor: x2, x4 or OFF.

Use Arrow ( K /L / s / B ) to move the zoomed picture
across the screen.

To exit zoom mode, press ZOOM to OFF.

• Zooming function does not work while disc menu is

shown.

• x4 zoom is not available on some discs.
• Only x2 zoom is available on Video CDs and JPEG.
• You may not be able to move zoomed JPEG pictures.

During playback, press DIRECT
SKIP repeatedly until the
Chapter Search or the Title
Search screen appears.

Enter the desired chapter/title number using the numeri-
cal buttons.

• Depending on the disc being played, this function can

also be performed by directly entering the desired
chapter number using numerical buttons. Refer to the
manual accompanying the disc.

/2

VR mode

VR mode

VR mode

VR mode

There are three ways to begin playback on an Audio CD,
Video CD, MP3 or JPEG disc at a specific Track.

Press the numerical buttons to enter the desired Track
number.

• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number 

(eg. track 3, press 3).

• To play track 26, press +10, 2, 6 on the numerical but-

tons.

Press DIRECT SKIP.

• The track search display appears.

Within 30 seconds, select a desired track number using
the numerical buttons. For single digits press “0” first.

• Playback will start at the selected track.

Using the SKIP H G
During playback, press SKIP G  to move to the next track.
Press it quickly and repeatedly to skip subsequent tracks.
Press SKIP H to go back to the beginning of the current
track. Press it repeatedly to go to the previous tracks.

• Track number will appear briefly on the VCR/DVD dis-

play panel.

• If SKIP is pressed while the playback is paused, the

playback will be paused again after skipping to the next
track.

• SKIP H G are not available when playback is

stopped.

without PBC function

H9741BD(EN).qx4  04.5.12  16:03  Page 21

– 22 –

EN

To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time

you press the button.

• Repeat Title/Chapter is not available with some scenes.
• The REPEAT setting will be cleared when moving to

other title or chapter.

• REPEAT are available only during playback.

(current chapter repeat) (current title repeat)

(repeat off)

(entire disc repeat)

VR mode

Press A-B REPEAT  at your chosen starting point.

•

A- appears briefly on the TV screen.

Press A-B REPEAT  again at your chosen end point.

•

A-B appears briefly on the TV screen, and the repeat

sequence begins.

To exit the sequence, press A-B REPEAT.

• The A-B REPEAT  section can only be set within the cur-

rent title (for DVDs), or current track (for audio CDs).

• A-B REPEAT  is not available with some scenes in DVD.
• To cancel the A point which was set, press CLEAR/C-

RESET.

• A-B REPEAT playback does not function during title,

chapter, track or all repeat playback.

• The REPEAT setting will be cleared when moving to

other track.

• Repeat playback does not function during A-B REPEAT

playback.

To activate the repeat function, press REPEAT during playback.

• The repeat mode changes as described below every time

you press the button.

(current track repeat)

(entire disc repeat)

(repeat off)

VR mode

without PBC function

You may determine the order in which tracks will play.

Press MODE (playback
must first be stopped).

• The PROGRAM screen

will appear.

Press 

▲ or ▼ to select a

track, then press ENTER.

• Press CLEAR/C-RESET

to erase the most
recently entered programme.

Press PLAY to play the programmed tracks.

• While the programme is being played back, the STOP

works as follows.

• Press STOP once and then PLAY again, playback will

restart from the point where STOP was pressed.
(Programme continued)

• Press STOP twice and then PLAY. Playback starts

from the track in the original order. However, the pro-
gramme can be called back when you follow the above
steps. Your programmes will be stored unless either the
disc tray is opened or power is turned off.

• Up to 99 programmes can be entered.
• To erase all programmes at once, select ALL CLEAR at

the bottom of the list at step

.

• To repeat the current track in the programme, press

REPEAT repeatedly until 

TRACK appears during

playback. If you like to repeat the entire programme
press REPEAT repeatedly until 

ALL appears during

playback.

• Refer to page 24 for programme playback of MP3 and

JPEG.

0:03:30

(current chapter repeat)

(current title repeat)

(repeat off)

(current track repeat) (current group repeat)

(repeat off)

(entire disc repeat)

During playback, press DIRECT SKIP repeatedly until the

Time Search screen appears.

Within 30 seconds, enter a desired disc time using the

numerical buttons.

• Playback will start at the specified time.
• When there is no need to enter a number, “0” appears

automatically. For example, “0:0_:_ _” appears in the
Time Search display if the total time of the disc is less
than 10 minutes.

• Press CLEAR/C-RESET to erase the incorrect input.

VR mode

without PBC function

H9741BD(EN).qx4  04.5.12  16:03  Page 22

– 23 –

EN

Applicable JPEG file

Remarks

Size of
image

Upper limit:
6300x5100 dots
Lower limit:
32x32 dots

A JPEG image that extends
beyond the screen is
reduced so that it will be
displayed within the screen.

When a CD with MP3 or JPEG files is inserted in the
VCR/DVD and MENU is pressed, the FILE LIST will appear
on display. The number of tracks is also displayed on the
front panel.

Press K or L to select the desired group (folder) or track.

• If a group (folder) is

selected, press B   or
ENTER to go on to the
track selection screen.
Press K or L to choose a
track, then press PLAY
or ENTER.

• If a track is selected,

press PLAY or ENTER to
start playing tracks. Starting from the one that has been
chosen and the subsequent tracks will be played.

• Press TITLE to return to the first item.

Press STOP to stop playback.

• Folders are known as Groups; files are known as Tracks.
• Folders are accompanied by

icon.

• MP3 files are accompanied by

icon.

• JPEG files are accompanied by

icon.

• Maximum of 255 folders can be recognised.
• Maximum of 512 files can be recognised.
• Up to 8 hierarchies can be created.

This VCR/DVD recommends the use of files recorded at the
below specifications:

• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 112kbps ~ 320kbps.

3

folder name 1

folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3

JPEG

Press MENU. Kodak Picture
CD menu appears.

• If all menu items cannot be

displayed in the screen
scope,  “G ” appears at the
right bottom of the screen,
indicating that the user can
view remaining items on the
next page. “H” appears, it
indicates that the user can view other items on the pre-
vious page. The track number of the currently highlight-
ed item and the total tracks are shown at the centre
bottom of the screen.

• If  “G” is shown at the right bottom, use SKIP G to

view the next page. If “H” is shown at the left bottom,
use SKIP H to view the previous page.

• It may take some time until all menu items are dis-

played on the menu screen.

Press Arrow ( K /L / s / B ), select a desired track to be
played, then press PLAY or ENTER.

• If a Kodak Picture CD file is selected, an image will be

played back from the selected track and go to the next
one in turn.

Press STOP to stop playback.

• A track is displayed for five seconds and then the next

track is displayed.

Picture 1

Picture 2

Picture 3

Picture 4

Current track number / 

the number of total tracks

Picture 5

Picture 6

1/32

The VCR/DVD can also run JPEG files stored on Kodak
Picture CDs. The Picture CD is a service to convert pho-
tographs taken by a conventional film camera into digital data
and write the data on a CD. The user can enjoy picture
images on the television set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that deals
with developing service of Kodak Inc.

• This VCR/DVD can play back images and sounds from

data recorded in MP3 and JPEG formats on CD-R and
CD-RW discs.

• A file with an extension of “.mp3 (MP3)” is called an “MP3

file”.

• A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)”

is called a “JPEG file”.
The VCR/DVD can run an image file conforming to the
Exif specification. Exif is a file format, Exchangeable
Image File format established by Japanese Electronic
Industry Development Association (JEIDA).

• Files whose extension is other than “.mp3 (MP3)”, “.jpg

(JPG)” and “.jpeg (JPEG)” will not be listed in the MP3 or
JPEG menu.

• If the file is not recorded in MP3 or JPEG format, noise

may be produced even if the file extension is either “.mp3
(MP3)”, “.jpg (JPG)” or “.jpeg (JPEG)”.

• The name of group and track can be displayed in up to

25 characters. Unrecognisable characters will be
replaced with asterisks. The ninth and deeper hierarchies
cannot be displayed.

• Unplayable groups or tracks may be displayed depending

on the recording conditions.

• If TITLE is pressed when a file list is displayed, the first

item will be highlighted.

This shuffles the playing order
of tracks instead of playback in
the sequence.

In stop mode, press MODE
repeatedly until the RAN-
DOM screen appears.

Press PLAY to start random
playback.

• To repeat the current track in the random selection,

press REPEAT repeatedly until 

TRACK appears

during playback. To repeat the entire random selection
press REPEAT repeatedly until 

ALL appears during

playback.

• Refer to page 24 for programme playback of MP3 and

JPEG.

H9741BD(EN).qx4  04.5.12  16:03  Page 23

– 24 –

EN

In stop mode, press MODE repeatedly until the RAN-
DOM screen appears.

Press PLAY to play the tracks in random order.

This feature allows you to programme an MP3 or JPEG disc
to play in a desired sequence.

Press MODE (playback must first be stopped).

• The PROGRAM screen will appear.

Press K or L to select a track, then press ENTER, to
save it in a programme.

• Press CLEAR/C-RESET to erase the incorrect input.

Press PLAY to start programmed playback.

• To erase all tracks in the programme at once, select ALL

CLEAR at the bottom of the list at step

.

• Press STOP once and then PLAY again, playback will

restart from the beginning of the track at which STOP
was pressed.

• Press STOP twice and then PLAY. Playback starts

from the track in the original order. However, the pro-
gramme can be called back when you follow the above
steps. Your programmes will be stored unless either the
disc tray is opened or power is turned off.

Press AUDIO repeatedly during playback to select
between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active

• If the Virtual Surround setting is ON, the sound mode will

be fixed to STEREO, and cannot be changed.

• Stereo sound mode will not be changed when playing

DTS CD.

The VCR/DVD allows you to select a language during DVD
disc (if multi language available) playback.

Press AUDIO during playback.
Press AUDIO repeatedly to select your desired language.

• The sound mode cannot be changed during playback of

discs not recorded in double sound.

• Audio language selection cannot be made during Rapid

Play. (Refer to page 20.)

• Pressing AUDIO may not work on some DVDs with mul-

tiple audio languages (e.g. DVDs which allow audio lan-
guage setting on the disc menu).

• Pressing AUDIO cycles the sound mode through MAIN,

SUB, MAIN + SUB.

• With discs recorded in VR mode, changing the audio

(MAIN, SUB or MAIN+SUB) is effective only when
using an analogue connection. Although you may be
able to change the settings of the on-screen display, it
will not affect the sound when using a digital connec-
tion.

• DVD-RW discs recorded in double sound (two lan-

guages ) can be played back in either sound mode of
MAIN, SUB or MAIN + SUB.

VR mode

You can switch to the slide show mode during playback.

Press MODE during playback.

• The slide show mode screen will appear.
• The slide show mode cannot be switched when it is

stopped, or from the file list screen or the Picture CD
menu screen.

Press ENTER.

• The slide show mode will change.

CUT IN/OUT:

The entire image appears in one time.

FADE IN/OUT: The image appears gradually and then

disappears.

Press MODE to exit.

Display on 

the TV screen

Mode

MAIN

SUB

MAIN

SUB

MAIN

SUB

MAIN+

SUB

Main Audio

Main Audio

Sub Audio

Sub Audio

Main Audio

Sub Audio

L

R

L

R

L

R

AUDIO OUTPUT

• Every press on B will turn the image clockwise by 90

degrees when an image is displayed. A press on s will
turn the image counterclockwise by 90 degrees.

• If a group is selected, press K or L  to select a desired

group, then press B, PLAY or ENTER to select a track.

H9741BD(EN).qx4  04.5.12  16:03  Page 24