DOWNLOAD Sharp DV-L80 (serv.man3) Service Manual ↓ Size: 418.28 KB | Pages: 21 in PDF or view online for FREE

Pixels: 336,960 (234 (H) 

× 

480 (W) 

× 

3)

Effective Pixel Rate: 99.99% minimum

Speakers: Two 28mm round speakers

Light Source: Internal (fluorescent)
Video Signal: Horizontal Resolution: 500 lines (DVD)

S/N Ratio: 60 dB

Audio Signals: Frequency Characteristics:

Linear PCM DVD: 4Hz to 22kHz (48kHz sampling)/

4Hz to 44kHz (96kHz sampling)

CD: 4Hz to 20kHz (EIAJ)
(MPEG Audio Version 2.0)
S/N Ratio: CD: 115dB 1kHz (EIAJ)
Dynamic Range: Linear PCM DVD: 103dB (EIAJ)

CD: 103dB (EIAJ)

Total Harmonic Distortion Ratio: 0.006% maximum (EIAJ)

Power Requirements: AC Adapter: 10V DC

Battery Pack: 7.4V DC

Power Consumption: Main Power On: 16.5W average (12.8W without AC Adapter)

Main Power Off: 0.2W (without AC Adapter)
Standby mode: 2.0W (with AC Adapter)

Dimensions: 211 (W) 

× 

157 (D) 

× 

24.7 (H) mm

(except for projections)

Weight (approx.): 840g

Operating Temperature: 5

°

C to 35

°

C

Operating Humidity: 80% RH maximum

Storage Temperature: -20

°

C to 40

°

C

AC Adapter Specifications

Power Requirements: 110 to 240V AC, 50/60Hz

Rated Output: DVD Operation: 10V DC

Charging: 10V DC

Dimensions: 58 (W) 

× 

105 (D) 

× 

27.5 (H) mm

Weight (approx.): 170g

Battery Pack Specifications (Optional Accessory)

Model: BT-L200S

Type: Lithium-ion type

DC output: 7.4V

Capacity: 5600mAh

Operating temperature: 0

°

C to 40

°

C (charging: 10

°

C to 30

°

C)

Max. Dimensions: 193 (W) 

× 

144 (D) 

× 

13.7 (H) mm

without protruding parts

Weight (approx.): 430g

Specifications are subject to change without notice.
Weight and dimensions are approximate.

Digital Output (Linear PCM)
· The digital output format used in this Player is linear PCM audio sampled at 44.1 kHz or 48 kHz.
  Linear PCM sound for DVD discs sampled at 96 kHz cannot be output digitally.
  Check the disc jacket for information on the audio sampling used.

Accessories:

Audio Cord x 3 (DV-L80S/WX), Audio Cord x 1 (DV-L80W/WA),

S-Video/Video Cord x 1, AC Cord x 1, CR2025 type lithium battery x 1,

Remote Control Unit x 1, Lithium-ion Battery Pack x 1, AC Adapter x 1,

Operation Manual x 1, Earphones x 1, Quick Start Guide x 1(DV-L80S)

1. Remove the four screws 

1

.

2. Slide the cabinet C to the arrow direction to remove.

3. Remove the connectors 

2

.

4. Remove the screws 

3

.

5. Open the cabinet D and then remove it.

6. Remove the connectors 

4

 and 

5

 and 

6

.

7. Remove the two screws 

7

, and remove the LCD fixing angle.

8. Remove the LCD while removing the claw of the cabinet D.

9. Remove the one screw 

7

.

10. Remove the LCD PWB.

11. Remove the screw 

8

.

12. Remove the inverter unit.

13. Remove the nine screws 

9

.

14. Lift the cabinet A from the cabinet B, pull off the connector 

0

 and then

      remove the cabinet A.

9

10

Cabinet A

Cabinet B

4

5

7

8

6

Inverter Unit

LCD PWB

Cabinet D

LCD Fixing
Angle

Cabinet D

1

3

3

2

Cabinet C

15. Remove the six screws 

q

.

16. Remove the angle, insulate sheet, operate PWB and button in that order.

17. Remove the one screw 

w

.

18. Remove the damper ass'y.

19. Pull of the shaft.

20. Remove the disc cover 

e

 by pressing the open/close button.

21. Remove the spring.

22. Remove the mechanism by removing the connectors 

r

, 

t

 and 

y

.

23. Remove the screw 

u

.

24. Remove the charge PWB 

i

 by removing the B to B connector.

25. Remove the connector PWB 

o

.

26. Remove the connectors 

p

.

27. Remove the main PWB 

a

.

13

12

11

Insulate Sheet

Angle

Operate PWB

Button

Shaft

Damper Ass'y

14

15

17

16

20

20

15

21

14

19

18

B to B