Sharp DV-HR300H (serv.man25) Service Manual / Technical Bulletin ▷ View online
DVD 2006 08 01
Date of Issue: 1
st
August 2006
Classification:
White
DVD TECHNICAL BULLETIN
Page 2 of 3
Sharp Electronics (UK) Limited
Reference - RG 27 06 2006-1
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
3. Select the “Nero” icon. If you leave the mouse over the icon, it will be detailed as
“Switch to Nero Burning ROM”
4. On the left-hand side of the application, select the “Creates a new compilation”
icon.
DVD 2006 08 01
Date of Issue: 1
st
August 2006
Classification:
White
DVD TECHNICAL BULLETIN
Page 3 of 3
Sharp Electronics (UK) Limited
Reference - RG 27 06 2006-1
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
5. Select the “ISO” tab at the top and adjust the settings as shown in the picture
below.
6. Once the settings have been made, select the “New” button.
7. You can now revert back to Sharp DVD firmware update procedure for the model
that you are servicing, and copy the correct firmware across.
8. You can then burn the firmware onto a CD-ROM.
DVD 2006 08 01
Date of Issue: 1
st
August 2006
Classification:
White
DVD TECHNICAL BULLETIN
Page 3 of 3
Sharp Electronics (UK) Limited
Reference - RG 27 06 2006-1
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
5. Select the “ISO” tab at the top and adjust the settings as shown in the picture
below.
6. Once the settings have been made, select the “New” button.
7. You can now revert back to Sharp DVD firmware update procedure for the model
that you are servicing, and copy the correct firmware across.
8. You can then burn the firmware onto a CD-ROM.
DVD 2006 08 01
Date of Issue: 1
st
August 2006
Classification:
White
DVD TECHNICAL BULLETIN
Page 3 of 3
Sharp Electronics (UK) Limited
Reference - RG 27 06 2006-1
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
5. Select the “ISO” tab at the top and adjust the settings as shown in the picture
below.
6. Once the settings have been made, select the “New” button.
7. You can now revert back to Sharp DVD firmware update procedure for the model
that you are servicing, and copy the correct firmware across.
8. You can then burn the firmware onto a CD-ROM.
Display
