Sharp DV-HR300H (serv.man22) User Manual / Operation Manual ▷ View online
71
9
Press Red (B) (CONFIRMING) to
confirm the contents.
confirm the contents.
• The title is played back without the
scene to be erased.
Press Yellow (D) (ERASE) to
erase.
erase.
• Go to step 10.
• Press RETURN to cancel scene
• Press RETURN to cancel scene
erase.
10
Press \ to select “YES”, then
press SET/ENTER.
press SET/ENTER.
• Erase begins.
When erase completes, the screen in
step 5 appears.
step 5 appears.
• If “C (UNDO)” is displayed, you can
undo edit by pressing Green (C).
• To quit scene erase, press RETURN.
Then the edit screen appears.
11
Press EXIT to exit from Edit
mode.
mode.
NOTE
Selecting start and end points for scene
erase
• You cannot set a range shorter than 3
erase
• You cannot set a range shorter than 3
seconds.
• Once you erase a section of an original, it
is completely erased. It cannot be restored,
so be very careful and confirm before
erasing.
so be very careful and confirm before
erasing.
• Scenes can only be added and erased a
maximum of 50 times per title.
• If scenes have been added 51 or more
times to a disc using another DVD recorder.
Editing (Recording) may not function.
Editing (Recording) may not function.
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
CHANGE THUMBNAIL
DIVIDE CHAPTER
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
8
2
:
0
1
2
1
/
5
2
ERASE THIS SCENE?
ENTER
SELECT
ENTER
RETURN
n
YES
NO
EDIT(HDD ORIGINAL)
9
0
4
1
:
0
2
:
0
2
Editing an Original Title (HDD/DVD)
VIDEO Plus+
Searching for the Start
Point and End Point Scenes
Point and End Point Scenes
The following playback operations are
available when searching for the start point
and end point scenes.
available when searching for the start point
and end point scenes.
Playback
• If you press |
• If you press |
|
|
|
|PLAY, the currently paused
title will be played back.
Skipping to the start of a chapter
• If the scene to be selected is in another title
• If the scene to be selected is in another title
or chapter, first search for the title or
chapter using
chapter using
K
or
L
.
Searching for scenes in a chapter
•
•
G
REV and
J
FWD are convenient for
searching for a scene in a chapter.
Pause
• When you reach a scene near the start
• When you reach a scene near the start
point or end point, press
F
STILL/PAUSE
to pause. This will make it easier to find the
scene. The start and end points may shift
slightly.
scene. The start and end points may shift
slightly.
Frame Advance/Reverse
• If you press
• If you press
L
after pause, the video
will start Frame Advance Playback. If you
press
press
K
, it will start Frame Reverse
Playback.
Final selection of scene
• To select a scene more accurately, use
• To select a scene more accurately, use
slow playback starting a little before the
scene to be selected. This will keep you
from going beyond the scene.
If you press SLOW after pausing, you
can select a scene at your leisure during
slow playback of the video.
scene to be selected. This will keep you
from going beyond the scene.
If you press SLOW after pausing, you
can select a scene at your leisure during
slow playback of the video.
DV-HR300H-070-076
04.1.16, 4:00 PM
71
72
VIDEO Plus+
Editing an Original Title (HDD/DVD)
Inputting/Changing Title
Name (CHANGE TITLE
NAME)
Name (CHANGE TITLE
NAME)
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
• When you record, a title name including the
date, time and channel number is auto-
matically created.
You can freely change this title name.
matically created.
You can freely change this title name.
• You can input up to a maximum of 64
characters.
To input, perform the following steps in
order: “Select characters to be changed”
To input, perform the following steps in
order: “Select characters to be changed”
→ “Delete unnecessary characters
(characters to be changed)”
(characters to be changed)”
→ “Input new
characters”.
NOTE
• Title names cannot be changed in finalized
Video mode discs.
Before Starting Editing
• Switch to the drive (HDD or DVD) to
be edited.
1
Press START MENU.
2
Press ' / " / \ / | to select “EDIT/
ERASE”, then press SET/ENTER.
ERASE”, then press SET/ENTER.
3
Press ' / " to select “EDIT”,
then press SET/ENTER.
then press SET/ENTER.
4
1
1
1
1
1
Press ' / " / \ / | to select the
title to edit.
title to edit.
2
2
2
2
2
Press Yellow (D) (EDIT MENU).
• Edit Menu screen appears.
5
1
1
1
1
1
Press ' / " to select
“CHANGE TITLE NAME”.
“CHANGE TITLE NAME”.
2
2
2
2
2
Press SET/ENTER.
• Title Name Change screen appears.
REC LIST
TIMER
PROGRAM/
CHECK
INITIALIZE/
FINALIZE
OTHER
SETTINGS 1
EDIT/
ERASE
DUBBING
EDITS/ERASES RECORDED TITLES
START MENU[EDIT/ERASE]
8
2
:
0
1
2
1
/
5
2
EDIT/ERASE
EDIT
DELETES SCENE,
CREATES/EDITS PLAYLIST.
ERASES ALL TITLES ON DISC
(EXCEPT PROTECTED TITLES).
ERASE ALL TITLES
8
2
:
0
1
2
1
/
5
2
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
DIVIDE CHAPTER
8
2
:
0
1
2
1
/
5
2
CHANGE TITLE NAME.
EDIT(HDD ORIGINAL)
0
0
0
1
:
6
1
:
6
1
1
2
6
5
4
3
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
ENTER
SELECT
TITLE LIST
CHAPTER
EDIT MENU
ENTER
RETURN
n
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
0
0
0
1
:
6
1
:
6
1
6
Change Title Name.
BACK SPACE
BACK
FORWARD
SPACE
small
END
8
2
:
0
1
2
1
/
5
2
A
N
À
0
&
B
O
Á
Ñ
1
'
C
P
Â
Ò
2
*
D
Q
Ã
Ó
3
/
E
R
Ä
Ô
4
[
F
S
Å
Õ
5
\
G
T
Æ
Ö
6
]
H
U
Ç
Ø
7
^
I
V
È
Ù
8
J
W
É
Ú
9
K
X
Ê
Û
-
L
Y
Ë
Ü
+
{
M
Z
Ì
<
|
.
(
Í
=
}
,
)
Î
ß
>
˜
?
:
Ï
$
"
i
!
;
#
%
_
ENTER
SELECT
ENTER
ERASE
ERASE ALL
RETURN
n
PR 33 FINE 2004/4/10 16:00|
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
EDIT(HDD ORIGINAL)
0
0
0
1
:
6
1
:
6
1
1
1
1
1
1
Press Red (B) or Green (C) to
select the character to change.
select the character to change.
• When you want to insert characters,
move the cursor to the position you
want to insert by pressing Red (B) or
Green (C).
want to insert by pressing Red (B) or
Green (C).
2
2
2
2
2
Press Blue (A) to erase the
character to change.
character to change.
World Rail
7
Press ' / " / \ / | to select the
character to input, then press
SET/ENTER.
character to input, then press
SET/ENTER.
• Inputs character in input field.
• To switch between capital and small
• To switch between capital and small
letters, select “CAPS” or “small”, then
press SET/ENTER.
press SET/ENTER.
8
Input title letters by repeating step
7.
7.
• Press Blue (A) (BACK SPACE) to
erase text to the left of the cursor, a
character at a time.
character at a time.
• Press Red (B) (BACK) to move the
cursor back one space.
• Press Green (C) (FORWARD) to move
the cursor forward one space.
• Press Yellow (D) (SPACE) to input a
space.
• The maximum number of characters
you can input is 64.
9
Press ' / " / \ / | to select “END”
and then press SET/ENTER
After input is finished.
and then press SET/ENTER
After input is finished.
• The new title is set, and the screen in
step 5 displays.
Press Green (C) (UNDO) to
return to the previously set title.
return to the previously set title.
• The title returns to original name.
• Operate according to the instructions
• Operate according to the instructions
of the screen.
10
Press EXIT to quit editing.
• Edit mode will terminate.
Cursor (Displays the position
to input characters.)
to input characters.)
Displays input characters.
Input field (Displays title name.
Can input and change title name.)
Can input and change title name.)
Select when you switch
between capital letters
and small letters.
Press '
'
'
'
' / "
"
"
"
" / \
\
\
\
\ / |
|
|
|
| to
select the character to
be input.
be input.
Select when you
complete inputting
character.
complete inputting
character.
DV-HR300H-070-076
04.1.16, 4:00 PM
72
73
VIDEO Plus+
ERASE SCENE
CHANGE TITLE NAME
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
SELECT SCENE FOR
THUMBNAIL
THUMBNAIL
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
00
00
1
00 : 00 : 00
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
9
0
4
1
:
0
2
:
0
2
Editing an Original Title (HDD/DVD)
Changing Thumbnail
(CHANGE THUMBNAIL)
(CHANGE THUMBNAIL)
HDD
VR MODE
DVD-RW
Changes the still frame picture displayed at
the Thumbnail screen of the REC LIST to your
favorite scene within the title.
the Thumbnail screen of the REC LIST to your
favorite scene within the title.
Before Starting Editing
• Switch to the drive (HDD or DVD) to
be edited.
1
Press START MENU.
2
Press ' / " / \ / | to select “EDIT/
ERASE”, then press SET/
ENTER.
ERASE”, then press SET/
ENTER.
3
Press ' / " to select “EDIT”,
then press SET/ENTER.
then press SET/ENTER.
• The Original Edit Title List Screen
appears.
4
Press ' / " / \ / | to select the
title to edit, then press Yellow
(D) (EDIT MENU).
title to edit, then press Yellow
(D) (EDIT MENU).
• Edit Menu screen appears.
REC LIST
TIMER
PROGRAM/
CHECK
INITIALIZE/
FINALIZE
OTHER
SETTINGS 1
OTHER
SETTINGS 2
EDIT/
ERASE
DUBBING
INFORMATION
EDITS/ERASES RECORDED TITLES
START MENU[EDIT/ERASE]
8
2
:
0
1
2
1
/
5
2
ENTER
SELECT
ENTER
RETURN
n
EDIT/ERASE
SELECT
ENTER
RETURN
ENTER
n
EDIT
DELETES SCENE,
CREATES/EDITS PLAYLIST.
ERASES ALL TITLES ON DISC
(EXCEPT PROTECTED TITLES).
ERASES SELECTED TITLES.
DISABLES EDIT/ERASE TITLES.
ERASE ALL TITLES
ERASE TITLES
TITLE PROTECT/OFF
8
2
:
0
1
2
1
/
5
2
1
2
6
5
4
3
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
ENTER
SELECT
TITLE LIST
CHAPTER
EDIT MENU
ENTER
RETURN
n
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
9
0
4
1
:
0
2
:
0
2
SCENE ERASE
CHANGE TITLE NAME
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTERS
SELECT SCENE FOR
THUMBNAIL
THUMBNAIL
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
01
14
1
00 : 00 : 12
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
9
0
4
1
:
0
2
:
0
2
ERASE SCENE
CHANGE TITLE NAME
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
PUT THIS
SCENE IN THE
THUMBNAIL?
SCENE IN THE
THUMBNAIL?
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
01
12
1
00 : 00: 41
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
9
0
4
1
:
0
2
:
0
2
5
1
1
1
1
1
Press ' / " to select
“CHANGE THUMBNAIL”.
“CHANGE THUMBNAIL”.
2
2
2
2
2
Press SET/ENTER.
6
Press |PLAY to start playback.
• Find the scene you want to use as a
thumbnail using
J
FWD,
G
REV,
F
STILL/PAUSE,
K
,
L
, or
SLOW.
7
Press SET/ENTER when you
reach the scene you want to use
as a thumbnail.
reach the scene you want to use
as a thumbnail.
• Playback is paused.
8
1
1
1
1
1
If this is the screen you want,
select “YES” by pressing \ / |.
select “YES” by pressing \ / |.
• If you select “NO”, you can return to
step 5 and select the scene again.
2
2
2
2
2
Press SET/ENTER.
• The new Thumbnail screen is set, and
the system returns to the screen in
step 5.
step 5.
Press Green (C) (UNDO) to
return to the previously set
thumbnail.
return to the previously set
thumbnail.
• Operate according to the instructions
of the screen.
9
Press EXIT to quit Thumbnail
edit.
edit.
• Edit mode will terminate.
DV-HR300H-070-076
04.1.16, 4:01 PM
73
74
Editing an Original Title (HDD/DVD)
VIDEO Plus+
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
SELECT POSITION
TO DIVIDE
THIS CHAPTER
TO DIVIDE
THIS CHAPTER
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
01
04
2
00 : 00: 00
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
9
0
4
1
:
0
2
:
0
2
Making Sections in a Title
(DIVIDE CHAPTER)
(DIVIDE CHAPTER)
HDD
VR MODE
DVD-RW
Divides a title into multiple chapters and
make editing and dubbing of chapter as unit
easier.
make editing and dubbing of chapter as unit
easier.
• You can set chapter divisions by pressing
CHAPTER MARK (under the cover)
during recording or playback.
during recording or playback.
Before Starting Editing
• Switch to the drive (HDD or DVD) to
be edited.
1
Press START MENU.
2
Press ' / " / \ / | to select “EDIT/
ERASE”, then press SET/
ENTER.
ERASE”, then press SET/
ENTER.
3
Press ' / " to select “EDIT”, then
press SET/ENTER.
press SET/ENTER.
4
Press ' / " / \ / | to select the
title to edit, then press Yellow
(D) (EDIT MENU).
title to edit, then press Yellow
(D) (EDIT MENU).
5
Press ' / " to select “DIVIDE
CHAPTER”, then press SET/
ENTER.
CHAPTER”, then press SET/
ENTER.
REC LIST
TIMER
PROGRAM/
CHECK
INITIALIZE/
FINALIZE
OTHER
SETTINGS 1
OTHER
SETTINGS 2
EDIT/
ERASE
DUBBING
INFORMATION
EDITS/ERASES RECORDED TITLES
START MENU[EDIT/ERASE]
8
2
:
0
1
2
1
/
5
2
EDIT/ERASE
EDIT
DELETES SCENE,
CREATES/EDITS PLAYLIST.
ERASES ALL TITLES ON DISC
(EXCEPT PROTECTED TITLES).
ERASES SELECTED TITLES.
DISABLES EDIT/ERASE TITLES.
ERASE ALL TITLES
ERASE TITLES
TITLE PROTECT/OFF
8
2
:
0
1
2
1
/
5
2
1
2
6
5
4
3
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
9
0
4
1
:
0
2
:
0
2
6
Press |PLAY to start playback.
• Find the scene to erase using
J
FWD,
G
REV,
F
STILL/PAUSE,
K
,
L
, or SLOW on the
remote comtrol.
7
Press SET/ENTER at the point
where you want to divide.
where you want to divide.
8
Press \ / | to select “YES”, then
press SET/ENTER.
press SET/ENTER.
• To continue dividing, repeat steps 5
to 7.
To cancel a chapter division,
press Green (C) (UNDO).
press Green (C) (UNDO).
• Operate according to the instructions
on the screen.
9
Press EXIT to quit editing.
• Edit mode will terminate.
NOTE
• Divide a chapter to make it 3 or more
seconds. You cannot divide a chapter into a
section which is less than 3 seconds.
section which is less than 3 seconds.
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
DIVIDE CHAPTER?
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
01
04
1
00 : 00: 12
YES
NO
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
9
0
4
1
:
0
2
:
0
2
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
SELECT POSITION
TO DIVIDE
THIS CHAPTER
TO DIVIDE
THIS CHAPTER
8
2
:
0
1
2
1
/
5
2
EDIT(HDD ORIGINAL)
01
04
2
00 : 00 : 01
0
1
/
N
O
M
4
E
L
3
3
T
I
T
R
P
:
O
F
N
I
:
E
L
T
I
T
E
N
I
F
9
0
4
1
:
0
2
:
0
2
DV-HR300H-070-076
04.1.16, 4:01 PM
74