DOWNLOAD Sharp DV-HR300H (serv.man21) Service Manual ↓ Size: 2.3 MB | Pages: 34 in PDF or view online for FREE

Model
DV-HR300H (serv.man21)
Pages
34
Size
2.3 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
DVD / Part 2
File
dv-hr300h-sm21.pdf
Date

Sharp DV-HR300H (serv.man21) User Manual / Operation Manual ▷ View online

35
Time Shift Viewing
HDD
1
Press TIME SHIFT while
viewing a programme.
• Pause screen will be displayed in a
few seconds.
• Press 
■ STOP/LIVE to return to
current (live) broadcast.
2
Press | PLAY.
• Playback starts from the position you
paused.
• Press FSTILL/PAUSE to pause
playback (Still Playback).
To cancel Still Playback, press
FSTILL/PAUSE or |PLAY.
3
Press 
G
G
G
G
G
 REV or 
J
J
J
J
J
 FWD
during Time Shift Viewing.
• Each time you press the buttons, the
Fast Reverse/Forward Playback
speed changes as shown below.
Example: When 
J
 FWD is pressed
once
• Press |PLAY to return to the normal
playback speed.
4
Press 
STOP/LIVE to return to
the current (live) broadcast.
• Time Shift Viewing will be cancelled,
and the automatically recorded
content will be erased.
 NOTE
• Time shift viewing will stop in the following
cases.
• TIME SHIFT or 
■ STOP/LIVE is
pressed.
• HDD remaining capacity is gone.
• The broadcast whose recording is
prohibited is received.
Time Shift Viewing/Chasing Playback
VIDEO Plus+
(Approx. 2g)
(Approx. 32g)
(Approx. 8g)
Chasing Playback
HDD
1
Press | PLAY during recording.
• Playback starts from the beginning of
the programme being recorded.
(Chasing Playback)
• Press FSTILL/PAUSE to pause
playback (Still Playback).
To cancel Still Playback, press
FSTILL/PAUSE or |PLAY.
2
Press 
G
G
G
G
G
 REV or 
J
J
J
J
J
 FWD
during Chasing Playback.
• Each time you press the buttons, the
Fast Reverse/Forward Playback
speed changes as shown below.
Example: When 
J
 FWD is pressed
once
• Press |
|
|
|
PLAY to return to the normal
playback speed.
3
Press 
STOP/LIVE to return to
the live broadcast which is being
recorded.
(Approx. 2g)
(Approx. 32g)
(Approx. 8g)
Pause icon
(This will become a square icon during
Time Shift Viewing.)
Play icon
Fast Forward Playback 2
✕ icon
Fast Forward Playback 2
✕ icon
DV-HR300H-034-039
04.1.16, 2:55 PM
35
36
Recording to HDD
This section explains recording on the
hard disc (HDD). (For information on
recording to DVD, see page 38.)
Confirming Remaining Time
for Recording
To confirm on TV screen
• Press ON SCREEN (under the cover).
To confirm on front display panel
• Press DISPLAY (under the cover).
Confirming Remaining Time
• During live programme viewing or HDD
playback, remaining time of recording in
the selected recording mode will be
displayed.
• During HDD recording, remaining time of
recording in the currently selected
recording mode will be displayed.
Guide to Recordable Length
of Time
Recording Mode
Recording Programmes to
HDD for High Speed Dub-
bing from HDD to DVD-RW/R
in Video Mode
• High Speed Dubbing Priority
    Normally, recording onto HDD is done
using own format, but recording can also
be done using a format for high speed
dubbing onto DVDs formatted in Video
mode.
To perform high speed dubbing onto a
DVD in Video mode, set “HI SP DUB
PRIORITY” to “YES” and then record. (See
page 48.)
Chasing Playback (page 
35)
• This lets you playback and watch a
programme from the beginning while it is
being recorded on HDD.
Simultaneous Recording/
Playback (page 
66)
• This lets you playback and watch a
programme recorded on HDD, or a DVD or
CD, while recording another programme on
HDD.
Cutting out Commercials
(pages 
70, 81)
• After recording is finished, you can cut out
commercials and other unnecessary
scenes by calling up the Erase Scene
function.
   (Commercials cannot be cut out automati-
cally during recording.)
Tamper Proof
• You can set Tamper Proof to prevent
operations by mistake during recording or
timer recording.
1 Press and hold TAMPER PROOF (ON
SCREEN and DISPLAY together) for
more than 2 seconds.
2 Each time you perform this operation,
the function is activated or deactivated.
• If you try to operate the Recorder while
Tamper Proof is set, “
” blinks in the front
display panel and tells you that Tamper
Proof is set.
Information
• When there is a report message (e.g. when
a timer recording was not successfully
performed), the Recorder displays an on-
screen message telling that there is a
report message.
Check the report message by selecting
“INFORMATION” on the START MENU.
VIDEO Plus+
HD
OR
I N AL
D
I G
REMAIN 20h0m
0 0 : 0 0 : 0 0
1 0
1 0
F I NE
• Remaining time for recording differs
according to the recording mode.
• Recordable time might be less than above
figures depending on the programme to be
recorded.
• MN (manual) recording mode setting
allows you to select the picture quality from
among 32 levels on the “MANUAL REC.
MODE” screen (page 40).
Monitoring a Programme
Being Recorded while Play-
ing Back a Disc (page 
66)
• Picture in picture
    This lets you monitor a programme being
recorded, while playing back a disc, using
the Simultaneous Recording/Playback
function.
Dubbing (page 
47)
• Titles recorded on HDD can be saved by
dubbing them to DVD-RW/R. (You can also
dub from DVD-RW/R to HDD.)
• You can batch dub up to 5 programmes.
Recording mode
Recording time
FINE
20 hr
LP
67 hr
EP
100 hr
SP
33 hr
This display means
that you can record
20 hours more in
FINE mode.
DV-HR300H-034-039
04.1.16, 2:55 PM
36
37
Recording to HDD
Direct Recording to HDD
HDD
Explained below is the standard procedure
for recording the programme being viewed
onto HDD.
• A maximum of 12 hours can be recorded
onto HDD in one direct recording session.
• A maximum of 199 programmes can be
recorded (saved) onto HDD.
 NOTE
• The content being recorded will not be
recorded if power failure occurs or if power
cord is accidentally unplugged.
* Also direct recording to a DVD-RW/R is
possible (page 38).
Preparation for Direct Recording
• When you record NICAM broadcast, set
“NICAM” setting to “AUTO” (see page 95).
• When recording to the HDD, the recorded
data is the same as that recorded to a
DVD-RW in VR mode.
1
Press HDD to select HDD mode
.
• The HDD button on the front of the
Recorder lights up.
• HDD mode is selected automatically
when the power is turned on.
2
Press the Number buttons or
CH
to select the channel to
be recorded.
3
Press REC MODE to select the
recording mode.
• The recording mode changes as
shown below each time the button is
pressed.
• Recording mode set by selecting
“MNgg” is the recording mode set
on the “MANUAL REC. MODE” Select
screen (page 41).
4
Press Æ
Æ
Æ
Æ
Æ REC during broadcast
viewing.
• Recording begins and REC icon
displays in TV screen.
• REC indicator (for HDD) on the front of
Recorder is lit red during recording.
5
Press REC PAUSE to pause
recording.
• Record Pause does not work during
Chasing Playback.
• During pause, the REC indicator (for
HDD) on the front of the Recorder
blinks.
VIDEO Plus+
FINE
SP
LP
EP
MNgg
HD
OR
I N AL
D
I G
REMAIN 19h8m
0 0 : 1 9 : 3 0
1 / 1
1 / 1
F I NE
REC
STOP TIME 10 :
30
SELECT
ENTER
ENTER
SET STOP TIME.
6
Press REC PAUSE to resume
recording.
7
Press REC STOP to stop record-
ing.
• “DATA IS BEING RECORDED TO
DISC.” displays on TV screen and
recording stops.
 NOTE
• Data is still written to the disc after recording
is stopped, and so you may be unable to
start the next recording immediately.
• You cannot record programmes whose
recording is prohibited.
• Timer recording cannot be performed
during direct recording.  To perform timer
recording, stop direct recording before the
preset time for timer recording.
Inserting Chapter Marks
Manually during Recording
Press CHAPTER MARK (under the cover).
• “RECORDED CHAPTER MARK. ” is
displayed and chapter mark will be
inserted.
• You cannot insert chapter marks during
Simultaneous Recording/Playback.
Setting the Record End
Time during Direct
Recording (Simple
Recording Timer)
HDD
1
Press Æ
Æ
Æ
Æ
Æ REC on the remote
control during recording.
• The “SET STOP TIME” screen is
displayed.
2
Press  to set the end time.
• The end time can be set in units of 15
minutes.
• Total recording time cannot exceed
12 hours so the end time has to be
set accordingly.
• Press EXIT to stop setting midway
through.
3
Press SET/ENTER.
• The record end time is set, and the
Simple Recording Timer indicator
(clock mark) lights up on the front
display panel.
 REC icon
 REC PAUSE icon
DV-HR300H-034-039
04.1.16, 2:55 PM
37
38
This section explains recording on the
DVD (For information on recording to
HDD, see page 36.)
Checking Remaining Time
and Other Information
Press ON SCREEN (under the cover) during
DVD playback or recording.
• Disc capacity and the number of recorded
titles, etc. are displayed. It is recom-
mended to confirm before recording.
• “REMAIN 0h0m” or nothing will be
displayed when an unrecordable disc is
set.
 NOTE
• Disc remaining time display is approximate
measure of disc capacity. There may be
space left in disc capacity after recording.
(Remaining time during recording and after
recording might not be the same.)
Simultaneous Recording/
Playback (page 
66)
• HDD playback is possible while recording
or timer recording to DVD.
Dubbing (page 
47)
• Dubbing titles recorded on DVD to HDD or
titles recorded on HDD to DVD-RW/R are
possible.
• Exact Dubbing: Automatically selects the
appropriate recording mode according to
the remaining capacity of DVD when
dubbing titles recorded on HDD to DVD.
Not Enough Disc Capacity
• Exact Recording (page 87)
    Exact recording functions when the
selected recording mode is not appropriate
to fit the programme to the disc when you
timer record.
• Alternate Recording (page 92)
    Alternate recording functions when you
forget to load a DVD for timer recording. It
automatically timer records the programme
to HDD.
Cutting TV Commercials
(page 
70)
• You can cut unwanted scenes like TV
commercials by using the ERASE SCENE
function after the recording. (Cannot cut TV
commercials automatically.)
• You cannot cut scenes when you record
programmes by Video mode to DVD-RW or
DVD-R.
VIDEO Plus+
Recording to DVD
DVD-RW
OR
VR
I N AL
I G
REMAIN 0h30m
0 0 : 0 0 : 0 0
2
1 0
F I NE
Tamper Proof
• You can set Tamper Proof to prevent
operations by mistake during recording or
timer recording.
1 Press and hold TAMPER PROOF (ON
SCREEN and DISPLAY together) for
more than 2 seconds.
2 Each time you perform this operation,
the function is activated or deactivated.
• If you try to operate the Recorder while
Tamper Proof is set, “
” blinks in the front
display panel and tells you that Tamper
Proof is set.
Loading Disc
1
Press OPERATE to turn the
power on.
2
Press OPEN/CLOSE on the
Recorder to open the disc tray.
3
Load disc on the disc tray.
• Insert the disc with the label face up.
• In case of disc recorded on both
sides, face the side you want to
record down.
4
Press OPEN/CLOSE to close the
disc tray.
Direct Recording to DVD
VR MODE
DVD-RW
 
VIDEO MODE
DVD-RW
 
DVD-R
Explained below is the standard procedure
for recording the programme being viewed
onto DVD.
• You can create a maximum of 99 original
titles.
• Record in VR mode when you want to edit
later. Edit functions will be limited when you
record in Video mode.
Preparation for Direct Recording
• When you record NICAM broadcast, set
“NICAM” setting to “AUTO” (see page 95).
1
Press DVD to select DVD mode
.
• The DVD button on the front of the
Recorder lights up.
• When the power is turned on, HDD
mode is selected automatically.
OPERATE
OPERATE
Disc capacity
Number of titles
Number of
chapters
OPEN/CLOSE
DV-HR300H-034-039
04.1.16, 2:55 PM
38
Page of 34
Display

Sharp DV-HR300H (serv.man21) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp DV-HR300H (serv.man21) Service Manual ↓ Size: 2.3 MB | Pages: 34 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp DV-HR300H (serv.man21) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp DV-HR300H (serv.man21) DVD. Information contained in Sharp DV-HR300H (serv.man21) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.