Sharp CD-SW300H User Manual / Operation Manual ▷ View online
13/2/06
CD-SW300HE_EN.fm
29
CD-SW300H
TINSZA165AWZZ
1
2
3
4
5
6
7
Tape Recording
Various tape functions
Caution:
To remove the cassette, press the (TAPE ) button, and then
open the compartment.
Before changing from one tape operation to another, press the
(TAPE )
open the compartment.
Before changing from one tape operation to another, press the
(TAPE )
button.
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
Recording on a cassette tape
Function
Main unit
Remote
control
Operation
Playback
Press in the stop
mode.
mode.
Stop
Press in the playback,
fast forward or rewind
mode.
fast forward or rewind
mode.
Fast
forward/
Rewind
forward/
Rewind
Press in the playback
or stop mode.
or stop mode.
(TAPE 2
only)
only)
Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
on the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B
Tab for side A
13/2/06
CD-SW300HE_EN.fm
30
CD-SW300H
TINSZA165AWZZ
Tape Recording
Recording on a cassette tape (continued)
Recording from a CD or MP3/WMA disc
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
Press the (TAPE ) button.
The disc and tape will stop.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
4
Press the
button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired disc.
6
Within 5 seconds, press the
/
button to start
recording.
Recording is started from the selected disc. When the
playback of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
playback of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.
the tape starts.
13/2/06
CD-SW300HE_EN.fm
31
CD-SW300H
TINSZA165AWZZ
1
2
3
4
5
6
7
Tape Recording
To perform programmed recording:
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
Press the (TAPE ) button.
The disc and tape will stop.
Recording from the radio
To interrupt recording:
Press the
Press the
button.
To resume recording, press the / (TAPE ) button.
To stop recording:
Press the (TAPE ) button.
Press the (TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
Make sure that the TAPE 1 is not in use.
1 Programme discs and tracks (see page 21).
2 Press the
2 Press the
button.
3 Press the / (TAPE ) button to start recording.
1
Tune in to the desired station (see page 26).
2
Load a cassette into the TAPE 2 cassette compartment with
the side to be recorded on facing you.
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the
button.
Recording will be paused.
4
Press the / (TAPE ) button to start recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into
the TAPE 1 cassette
compartment. Insert a blank tape
into the TAPE 2 cassette
compartment.
It is recommended that the
recording tape is the same length
as the master tape.
the TAPE 1 cassette
compartment. Insert a blank tape
into the TAPE 2 cassette
compartment.
It is recommended that the
recording tape is the same length
as the master tape.
3
Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
the display.
4
Press the
button.
Recording will be paused.
5
Press the / (TAPE ) button to start dubbing.
1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing towards you.
2 Press the TAPE (1 2) button until "TAPE 2" appears on the
display.
3 Press the
button.
4 Press the / (TAPE ) button to start erasing.
TAPE 1
TAPE 2
13/2/06
CD-SW300HE_EN.fm
32
CD-SW300H
TINSZA165AWZZ
Advanced Features
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sport, music, etc.
When tuned to an RDS station, "RDS" and the station name will be
displayed.
"TP" (Traffic programme) will appear on the display when the
received broadcast carries traffic information, and "TA" (Traffic
Announcement) will appear whilst a traffic information is on air.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sport, music, etc.
When tuned to an RDS station, "RDS" and the station name will be
displayed.
"TP" (Traffic programme) will appear on the display when the
received broadcast carries traffic information, and "TA" (Traffic
Announcement) will appear whilst a traffic information is on air.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
You can control the RDS by using the buttons on the main unit
only.
Information provided by RDS
Each time the DISPLAY button is pressed, the display will
switch as follows:
switch as follows:
When you are tuning in to a station other than an RDS station or to
an RDS station which sends weak signal, the display will change in
the following order:
an RDS station which sends weak signal, the display will change in
the following order:
Station name (PS)
Programme type (PTY)
Frequency
Radio text (RT)
NO PS
NO PTY
FM 98.80 MHz
NO RT
Click on the first or last page to see other CD-SW300H service manuals if exist.