Sharp BD-HP90S (serv.man9) User Manual / Operation Manual ▷ View online
NOTE
When you insert or remove a USB memory
device, be sure to turn the main power off.
device, be sure to turn the main power off.
*
NOTE
Some optical and/or HDMI cables may not fit in the compartment.
•
16
Main Unit (Front)
Major Components
1
5
8
9
10
6
7
2
3
4
POWER
B (On/Standby) indicator
(p. 25)
AQUOS PURE MODE indicator
(pp. 25, 27)
(pp. 25, 27)
3D indicator (pp. 25, 27)
5
6
7
USB terminal (p. 34)
POWER
B (Power) (p. 25)
Remote control sensor “Front”
(p. 19)
(p. 19)
8
9
10
Remote control sensor “Top” (p. 19)
BD/DVD/CD mode indicator (p. 25)
Disc slot (p. 29)
EJECT (p. 29)
1
2
3
4
Main Unit (Rear)
1
3
4
5
6
7
8
2
9
DC IN terminal (p. 25)
OPTICAL DIGITAL AUDIO OUT terminal (p. 21)
HDMI OUT terminal (p. 20)
ETHERNET terminal (p. 22)
Screw holes for VESA 75 Mount
Screw size: M4 (Maximum length = Mount plate thickness + 6 mm)
Recommended tightening torque for M4 screws: 1.2±0.1N·m (12.2±1kgf·cm)
Screw size: M4 (Maximum length = Mount plate thickness + 6 mm)
Recommended tightening torque for M4 screws: 1.2±0.1N·m (12.2±1kgf·cm)
5
6
7
8
9
Cooling fan
The cooling fan operates while the
power to the Player is on.
The cooling fan operates while the
power to the Player is on.
Terminal cover (p. 18)
Selector switch for Remote control
sensor (p. 19)
sensor (p. 19)
Screw hole for installing the vertical
stand (p. 19)
stand (p. 19)
1
2
3
4
Model label
Major Components
B (Power) (p. 25)
m EJECT (p. 29)
TOP MENU/TITLE LIST (pp. 30, 32)
m EJECT (p. 29)
TOP MENU/TITLE LIST (pp. 30, 32)
DISPLAY (pp. 29, 37)
Cursor buttons (
a/b/c/d), ENTER (pp. 26, 41)
EXIT (p. 41)
A (Red), B (Green), C (Yellow), D (Blue)
(pp. 32, 33, 35, 48)
(pp. 32, 33, 35, 48)
AUDIO (p. 38), SUBTITLE (p. 38), ANGLE (p. 38)
PinP (p. 31)
REPEAT (p. 37), OFF (for REPEAT) (p. 37)
S REV (p. 36)
T SKIP (pp. 32, 36)
T SKIP (pp. 32, 36)
REPLAY (p. 36)
(Lock) (See below.)
LIGHT (p. 26)
TV CONTROL buttons (p. 26)
HOME (pp. 26, 41)
POP-UP MENU (p. 30)
FUNCTION (p. 39)
n RETURN (pp. 33, 37)
PAGE
r/s (p. 32)
d PLAY (p. 29)
V FWD (p. 36)
F PAUSE (pp. 34, 36)
U SKIP/
V FWD (p. 36)
F PAUSE (pp. 34, 36)
U SKIP/
l (pp. 32, 36)
SKIP SEARCH (p. 36)
H STOP (p. 29)
3D (p. 27)
VIDEO OUTPUT RESET (p. 42)
Number buttons (p. 40)
ENTER (p. 40)
This button is the same operation as
This button is the same operation as
5 ENTER.
CLEAR (p. 40)
To clear the input number.
To clear the input number.
Non-functional buttons
They have no operation at all.
These buttons on the remote control are non-functional.
They have no operation at all.
These buttons on the remote control are non-functional.
Keylock function
You can set the keylock to prevent accidental operations.
This function allows TVs compatible with AQUOS LINK to
also perform a Key Lock on the player.
Press and hold
This function allows TVs compatible with AQUOS LINK to
also perform a Key Lock on the player.
Press and hold
(Lock) for more than 2 seconds.
Each time you perform this operation, the function is
activated or deactivated.
In such cases, the BD/DVD/CD mode indicator blinks.
When operating the player in a status where the keylock
functions is set, the BD/DVD/CD mode indicator will
blink for approximately 2 seconds.
activated or deactivated.
In such cases, the BD/DVD/CD mode indicator blinks.
When operating the player in a status where the keylock
functions is set, the BD/DVD/CD mode indicator will
blink for approximately 2 seconds.
•
•
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Remote Control Unit
17
Intr
oduction
1
3
4
5
6
11
12
13
13
14
15
28
22
23
24
25
26
23
24
25
26
27
29
21
20
19
16
18
17
7
8
8
9
10
2
Buttons under the cover
31
32
33
30
NOTE
This remote control unit is equipped with two
ENTER
buttons (
5 and 31 listed above). The ENTER button under
the cover is useful when using with the number buttons.
•
BD/DVD/CD mode indicator
Removing and replacing the
terminal cover
terminal cover
Before connecting the player to a TV, the AC adapter,
etc., remove the terminal cover on the bottom of the
player.
etc., remove the terminal cover on the bottom of the
player.
Remove the terminal cover on the bottom of the
player.
player.
Make the necessary connections to the player
(pages 20–23, 25).
(pages 20–23, 25).
Replace the terminal cover.
Using the player in a horizontal position
Pass the cables through the centre of the
terminal cover.
terminal cover.
Replace the terminal cover so the cables pass
through the centre of the cover.
through the centre of the cover.
1
2
3
E
Using the player in a vertical position
Pass the cables through the end of the terminal
cover.
cover.
Replace the terminal cover so the cables pass
through the end of the cover.
through the end of the cover.
See page 19 to install the vertical stand.
E
•
Securing bracket for the HDMI cable
The terminal cover has a securing bracket to prevent
breakage of the HDMI cable. When the HDMI cable is
not passed straight through the securing bracket, the
terminal cover cannot be closed.
breakage of the HDMI cable. When the HDMI cable is
not passed straight through the securing bracket, the
terminal cover cannot be closed.
18
Player setup location
b Bottom side of the player
b Bottom side of the player
Pass the cables through here.
b Bottom side of the player
Installation example
b Bottom side of the player
Pass the cables through here.
Installation example
Securing bracket for the HDMI cable
b Back of the terminal cover
Player setup location
This player can be used in a horizontal or vertical
position depending on the installation location.
position depending on the installation location.
Using the player in a horizontal position
E
Using the player in a vertical position
E
Switch the remote control sensor to “Front” or “Top”
depending on the installation location.
depending on the installation location.
FRONT
TOP
Installing the vertical stand
When using the player in a vertical position, install the
supplied stand.
supplied stand.
Match the screw hole of the player and the
stand.
stand.
1
Secure the stand to the player.
Bundle the cables.
2
3
Securing the player to a TV stand, etc.
To prevent the player from falling, the stand can be
secured to a TV stand, etc.
Using a screw (commercially available), attach the screw
to the hole of the stand to secure the player.
secured to a TV stand, etc.
Using a screw (commercially available), attach the screw
to the hole of the stand to secure the player.
19
Intr
oduction
Remote control sensor “Front”
Remote control
sensor “Front”
sensor “Front”
Remote control
sensor “Top”
The screw is attached
on the stand.
on the stand.
Screw hole
Pass the cables
through the stand.
through the stand.
Screw (diameter:
approx. 3 mm)
approx. 3 mm)
TV stand, etc.
Selector switch for
Remote control sensor
Remote control sensor
Click on the first or last page to see other BD-HP90S (serv.man9) service manuals if exist.