DOWNLOAD Sharp XL-UR250H Service Manual ↓ Size: 4.47 MB | Pages: 55 in PDF or view online for FREE

Model
XL-UR250H
Pages
55
Size
4.47 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
xl-ur250h.pdf
Date

Sharp XL-UR250H User Manual / Operation Manual ▷ View online

E-38
ENGLISH
8
XL-UR2110H
XL-UR250H
XL-UR230H
References
Remote control
Tuner
USB
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
 
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and
plug in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
 
Factory Reset, Clearing All Memory 
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
Whilst pressing down the   1 button and the   5 button, press
the ON/STAND-BY button until “CLEAR ALL” appears.
 
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Symptom
Possible cause
The remote 
control does not 
operate.
Is the AC power lead of the unit plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incorrect?
Does the remote control sensor receive 
strong light?
Symptom
Possible cause
The radio 
makes unusual 
noises continu-
ously.
Is the unit placed near the TV or computer?
Is the FM aerial or AM loop aerial placed 
properly? Move the aerial away from the 
AC power lead if it's located nearby.
Symptom
Possible cause
Device cannot 
be detected.
Is there any MP3/WMA file available?
Is the device properly connected?
Is it MTP device?
Does the device contain AAC file only?
Playback does 
not start.
Is it the copyright protected WMA file?
Is it the false MP3 file?
Wrong time   
display.
Wrong file name 
display.
Is Variable Bitrate file being played back?
Is the File Name written in Chinese or 
Japanese characters?
Recording 
cannot start.
Is the USB device in write protect mode?
Is it a CD-WMA disc?
Is the device’s memory already full?
ON/
STAND-BY
E-39
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
References
Troubleshooting chart (continued) 
Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
 
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD
collection and player.
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive
moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
NO
YES
Correct
E-40
ENGLISH
8
XL-UR2110H
XL-UR250H
XL-UR230H
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General (XL-UR230H)
General (XL-UR250H)
General (XL-UR2110H)
Amplifier (XL-UR230H)
Amplifier (XL-UR250H)
Amplifier (XL-UR2110H)
Power source
AC 230 V, 50 Hz
Power 
consumption
Power on: 100 W                                                   
Power stand-by: 0.6 W(*)
Dimensions
Width: 175 mm (6-3/4") 
Height: 240 mm (9-1/2") 
Depth: 315 mm (12-1/5")
Weight
5.45 kg (11.7 lbs.)
Power source
AC 230 V, 50 Hz
Power 
consumption
Power on: 90 W                                                   
Power stand-by: 0.6 W(*)
Dimensions
Width: 175 mm (6-3/4") 
Height: 240 mm (9-1/2") 
Depth: 315 mm (12-1/5")
Weight
5.4 kg (11.7 lbs.)
Power source
AC 230 V, 50 Hz
Power 
consumption
Power on: 60 W                                                   
Power stand-by: 0.6 W(*)
Dimensions
Width: 175 mm (6-3/4") 
Height: 240 mm (9-1/2") 
Depth: 315 mm (12-1/5")
Weight
4.9 kg (10.8 lbs.)
 ( * )This power consumption value is obtained when the demonstration 
mode is cancelled in the power stand-by mode. Refer to page 8 to 
cancel the demonstration mode.
Output power
PMPO: 364 W
MPO: 182 W (91 W + 91 W) (DIN 45 324)
RMS: 100 W (50 W + 50 W) (DIN 45 324)
RMS: 76 W (38 W + 38 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms 
(recommended: 32 ohms)
Subwoofer pre-out (audio signal): 
200 mV/10 k ohms at 70 Hz
Input terminals
Video/Auxiliary (audio signal): 
500 mV/47 k ohms
Output power
PMPO: 660 W
MPO: 330 W (165 W + 165 W) (DIN 45 324)
RMS: 160 W (80 W + 80 W) (DIN 45 324)
RMS: 128 W (64 W + 64 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms 
(recommended: 32 ohms)
Subwoofer pre-out (audio signal): 
200 mV/10 k ohms at 70 Hz
Input terminals
Video/Auxiliary (audio signal): 
500 mV/47 k ohms
Output power
PMPO: 160 W
MPO: 80 W (40 W + 40 W) (DIN 45 324)
RMS: 40 W (20 W + 20 W) (DIN 45 324)
RMS: 26 W (13 W + 13 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms 
(recommended: 32 ohms)
Subwoofer pre-out (audio signal): 
200 mV/10 k ohms at 70 Hz
Input terminals
Video/Auxiliary (audio signal): 
500 mV/47 k ohms
E-41
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
References
Specifications (continued)
CD player
Tuner
USB
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser 
pickup
D/A converter
D/A Multi-bit converter
Frequency response 20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Support preset 
memory
40 presets (AM and FM).
USB host 
interface
Complies with USB 1.1 (Full Speed)/ 2.0 
Mass-Storage-Class.
Supports Bulk only and CBI protocol.
Support file
MPEG 1 Layer 3
MPEG 2/2.5 Layer 3
WMA (Non DRM)
Bitrate support
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Other
Maximum total number of MP3/WMA files 
is 65 535.
Maximum total number of folders is 512 
INCLUSIVE of root directory. (Folders with  
non playable files are also counted.)
The ID3TAG information supported are 
TITLE, ARTIST and ALBUM only.
Supports ID3TAG version 1 and version 2.
Maximum number of folders that can be 
recorded is 128.
Maximum number of files in a folder that 
can be recorded is 128.
File  system 
support
Supports USB devices with Microsoft 
Windows/DOS/FAT 12/ FAT16/ FAT 32.
2 kbyte block length for sector.
Page of 55
Display

Click on the first or last page to see other XL-UR250H service manuals if exist.