DOWNLOAD Sharp XL-UR250H Service Manual ↓ Size: 4.47 MB | Pages: 55 in PDF or view online for FREE

8

XL-UR2110H

XL-UR250H

XL-UR230H

When performing timer playback or recording using another unit
connected to the USB terminal or AUX IN sockets, select “USB”
or “AUX” in step 9.
This unit will turn on or enter the power stand-by mode automati-
cally. However, the connected unit will not turn on or off.
During timer playback or timer recording, TIMER indicator light
and timer indicator on display r, will blink.
To stop the blinking, follow step “Cancelling the timer setting in
the timer stand-by mode” on the right hand side of this page.

Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.

The volume will increase gradually until it reaches the preset 
volume.

The timer will be cancelled.
The “r” indicator will blink during timer playback.

The timer operates at the same time every day. It will continue 
until the daily timer setting is cancelled. Cancel the daily timer 
when it is not in use.
The “DAILY r” indicator will blink during timer playback.

1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the 

 or 

 button to select “ONCE” 

or “DAILY”, and press the MEMORY button. 

3 Within 10 seconds, press the 

 or 

 button to select “ONCE  

CALL” or “DAILY CALL”, and press the MEMORY button. 
The unit returns to the timer stand-by mode after displaying the 
settings in order.

1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the 

 or 

 button to select “ONCE” 

or “DAILY”, and press the MEMORY button. 

3 Within 10 seconds, press the 

 or 

 button to select “ONCE 

OFF” or “DAILY OFF”, and press the MEMORY button. 
Timer will be cancelled (the setting will not be cancelled).

1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the 

 or 

 button to select “ONCE” 

or “DAILY”, and press the MEMORY button. 

3 Within 10 seconds, press the 

 or 

 button to select “ONCE 

ON” or “DAILY ON”, and press the MEMORY button. 

4 Press the ON/STAND-BY button to enter the power stand-by 

mode.

XL-UR2110H

XL-UR250H

XL-UR230H

The radio, compact disc and USB can all be turned off automatically.

To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.

 

Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.

3 hours - 5 minutes   5-minute intervals

5 minutes - 1 minute   1-minute intervals

“SLEEP” will appear.

The volume will be turned down 1 minute before the sleep op-
eration finishes.

1

Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 or 

 button to select “SLEEP 

X : XX”.
“X : XX” is sleep remaining time.

The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by 
pressing the MEMORY button (steps 4 - 5).

1

Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 or 

 button to select “SLEEP 

OFF”, and press the MEMORY button.

1

Set the sleep time (see left, steps 1 - 5).

2

Whilst the sleep timer is set, set the timer playback (steps 2 - 
10, pages 32 - 33).

Sleep timer setting

Timer playback setting

Sleep operation will 
automatically stop.

Timer playback start time

End time

1 minute - 3 hours

Desired time

8

XL-UR2110H

XL-UR250H

XL-UR230H

The connection lead is not included. Purchase a commercially
available lead as shown below.

 
Auto power on function (USB/AUX):
When you press any of the following buttons, the unit turns on.

VIDEO/AUX/USB button (main unit and remote control): The unit
turns on and the “USB” or “AUX” function is activated.

 /   button on the main unit: The unit turns on and playback of

the last function starts (CD,TUNER,VIDEO/AUX/USB).

Note:
To prevent noise interference, place the unit away from the
television.
 
 

Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16  and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.

When using video equipment, connect the audio output to this 
unit and the video output to a television.

XL-UR2110H

XL-UR250H

XL-UR230H

When a commercially available subwoofer with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.

Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

 

Subwoofer with a 

built-in amplifier

The clock is not set to the 
correct time.

Did a power failure occur? Reset 
the clock. (Refer page 11)

When a button is pressed, 
the unit does not respond.

Set the unit to the power stand-
by mode and then turn it back on.

If the unit still malfunctions, reset 
it. (Refer page 38)

No sound is heard.

Is the volume level set to “0”?

Are the headphones connected?

Are the speaker wires discon-
nected?

Playback does not start.

Is the disc loaded upside down?

Playback stops in the 
middle or is not performed 
properly.

Does the disc satisfy the 
standards?

Is the disc distorted or 
scratched?

Playback sounds are 
skipped, or stopped in the 
middle of a track.

Is the unit located near excessive 
vibrations?

Is the disc very dirty?

Has condensation formed inside 
the unit?