Sharp XL-UR250H User Manual / Operation Manual ▷ View online
E-33
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Timer and sleep operation (Remote Control only) (continued)
4
Within 10 seconds, press the
or
button to select
“ONCE SET” or “DAILY SET”, and press the MEMORY
button.
button.
5
Press the
or
button to select “PLAY” or “REC”, and
press the MEMORY button.
The illustrations show the daily timer setting.
6
Press the
or
button to adjust the hour and then
press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
timer mode.
7
Press the
or
button to adjust the minutes and then
press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
9
Switch input with the
or
button, and then press the
MEMORY button.
To select the timer playback source: CD, TUNER, USB or
AUX.
To select the timer recording source: TUNER or AUX.
AUX.
To select the timer recording source: TUNER or AUX.
When you select the tuner, select a station by pressing the
or
button, and then press the MEMORY button.
If a station has not been programmed, “NO PRESET” will be
displayed and timer setting will be cancelled.
displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
by mode.
The “TIMER” indicator lights up and the unit is ready for timer
playback.
playback.
E-34
ENGLISH
8
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Notes:
When performing timer playback or recording using another unit
connected to the USB terminal or AUX IN sockets, select “USB”
or “AUX” in step 9.
This unit will turn on or enter the power stand-by mode automati-
cally. However, the connected unit will not turn on or off.
During timer playback or timer recording, TIMER indicator light
and timer indicator on display r, will blink.
To stop the blinking, follow step “Cancelling the timer setting in
the timer stand-by mode” on the right hand side of this page.
connected to the USB terminal or AUX IN sockets, select “USB”
or “AUX” in step 9.
This unit will turn on or enter the power stand-by mode automati-
cally. However, the connected unit will not turn on or off.
During timer playback or timer recording, TIMER indicator light
and timer indicator on display r, will blink.
To stop the blinking, follow step “Cancelling the timer setting in
the timer stand-by mode” on the right hand side of this page.
Checking the timer setting in the timer stand-by mode:
Cancelling the timer setting in the timer stand-by mode:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
12
When the preset time is reached, playback or recording
will start.
will start.
The volume will increase gradually until it reaches the preset
volume.
volume.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
The “r” indicator will blink during timer playback.
The “r” indicator will blink during timer playback.
Daily timer:
The timer operates at the same time every day. It will continue
until the daily timer setting is cancelled. Cancel the daily timer
when it is not in use.
The “DAILY r” indicator will blink during timer playback.
until the daily timer setting is cancelled. Cancel the daily timer
when it is not in use.
The “DAILY r” indicator will blink during timer playback.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
CALL” or “DAILY CALL”, and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
The unit returns to the timer stand-by mode after displaying the
settings in order.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
OFF” or “DAILY OFF”, and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Timer will be cancelled (the setting will not be cancelled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
ON” or “DAILY ON”, and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
E-35
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Timer and sleep operation (Remote Control only) (continued)
Sleep operation
The radio, compact disc and USB can all be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
button to select
“SLEEP”, and press the
MEMORY button.
MEMORY button.
4
Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
5
Press the MEMORY button.
“SLEEP” will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
eration finishes.
1
Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select “SLEEP
X : XX”.
“X : XX” is sleep remaining time.
“X : XX” is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
1
Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the
or
button to select “SLEEP
OFF”, and press the MEMORY button.
1
Set the sleep time (see left, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback (steps 2 -
10, pages 32 - 33).
10, pages 32 - 33).
Sleep timer setting
Timer playback setting
Sleep operation will
automatically stop.
automatically stop.
Timer playback start time
End time
1 minute - 3 hours
Desired time
E-36
ENGLISH
8
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
available lead as shown below.
Auto power on function (USB/AUX):
When you press any of the following buttons, the unit turns on.
VIDEO/AUX/USB button (main unit and remote control): The unit
turns on and the “USB” or “AUX” function is activated.
turns on and the “USB” or “AUX” function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
Listening to the playback sounds from VCR,
DVD, etc.
DVD, etc.
Note:
To prevent noise interference, place the unit away from the
television.
To prevent noise interference, place the unit away from the
television.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
RIGHT
LEFT
VIDEO/AUX IN
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX/USB button.
4
Play the connected equipment.
Click on the first or last page to see other XL-UR250H service manuals if exist.