DOWNLOAD Sharp XL-MP35H (serv.man9) Service Manual ↓ Size: 90.43 KB | Pages: 2 in PDF or view online for FREE

– 5 –

1

Top Cabinet

1. Screw .................. (A1) x5

5-1

2. Socket ................. (A2) x2

5-1,2

2

Side Panel(Left/Right) 1. Screw .................. (B1) x4

5-1

3

Rear Panel

1. Screw .................. (C1) x2

5-1

4

Main PWB/

1. Screw .................. (D1) x4

5-2

Headphones PWB

2. Socket ................. (D2) x4

3. Socket ................. (D3) x1

5

Front Panel

1. Screw .................. (E1) x2

5-3

2. Socket ................. (E2) x2

6

Power PWB

1. Screw .................. (F1) x1

5-3

2. Screw .................. (F2) x2

7

Display PWB

1. Knob .................... (G1) x1

5-4

2. Screw .................. (G2) x8

8

Tape Mechanism

1. Open the cassette holder

5-4

2. Screw .................. (H1) x4

9

CD PWB(Note)/

1. Screw .................. (J1) x4

6-1

Open Close Switch 2. Screw .................. (J2) x1
PWB

3. Socket ................. (J3) x3

10

CD Mechanism

1. Screw .................. (K1) x3

6-2

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need to

be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

(F2)x2
ø3x8mm

(E1)x1
ø3x10mm

(E1)x1
ø3x10mm

(F1)x1
ø3x10mm

(E2)x1

(E2)x1

Power 
PWB

Front Panel

Side Panel
(Right)

RearPanel

(C1)x1
ø3x10mm

(C1)x1
ø3x10mm

Side Panel
(Lift)

(A1)x1
ø3x10mm

(A1)x2
ø3x10mm

(A1)x1
ø3x10mm

(A1)x1
ø3x10mm

(A2)x1

(B1)x2
ø3x10mm

(B1)x2
ø3x10mm

Top Cabinet

CD PWB

(D1)x1
ø3x10mm

(D1)x1
ø3x10mm

(D1)x1
ø3x10mm

(D1)x1
ø3x10mm

(D2)x2

(A2)x1

(D2)x2

(D3)x1

Main PWB

Power PWB

Tape
Mechanism
PWB

Headphones
PWB

(G2)x8
ø2.6x10mm

(H1)x4
ø2.6x10mm

(G1)x1

Front Panel

Display PWB

Tape
Mechanism

Open

Cassette
Holder

After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.

– 6 –

Perform steps 1 to 5 and 8 of the disassembly method to
remove the tape mechanism. (See page 5.)

1. Remove the screws (A1) x 2 pcs., to remove the erase

head.

2. Remove the screws (A2) x 2 pcs., to remove the record/

playback head.

Note:
After replacing the heads and  performing the azimuth
adjustment, be sure to apply screwlock.

1. Carefully bend the pinch roller pawl in the direction of the

arrow 

, and remove the pinch roller (B1) x 1 pc.,

upwards.

1. Remove the main belt (C1) x 1 pc.,  from the motor pulley.
2. Remove the FF/REW belt (C2) x 1 pc., from the REW/FF

roller.

3. Put on the belts in the reverse order of removal.
Note:
When putting on the belt, ascertain that the belt is not twisted,
and clean it.

1. Remove the main belt.
2. Remove the screws (D1) x 2 pcs., to remove the motor

bracket.

3. Remove the screws (D2) x 3 pcs., to remove the motor.
Note:
When mounting the motor, pay attention to the motor mounting
angle.

Pinch Roller
(B1)x1

Pinch Roller
Pawl

Main Belt
(C1)x1

FF/REW Belt
(C2)x1

REW/FF
Clutch

Motor

Erase Head

Record/
Playback Head

(A1)x2
ø2x8mm

(A2)x1
ø2x3mm

(A2)x1
ø2x7mm

(D1)x1
ø2x4mm

(D2)x3
Special
Screw

Motor
Bracket

Motor

Motor

(D1)x1
ø2x4mm

(K1)x3
ø2.6x10mm

Top Cabinet

CD Mechanism

(J1)x4
ø2.4x10mm

(J2)x1
ø2.6x10mm

(J3)x2

(J3)x1

Top Cabinet

CD PWB

Open/Close
Switch PWB

CD Mechanism