DOWNLOAD Sharp XL-MP150E (serv.man3) Service Manual ↓ Size: 5.22 MB | Pages: 108 in PDF or view online for FREE

Model
XL-MP150E (serv.man3)
Pages
108
Size
5.22 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio / System
File
xl-mp150e-sm3.pdf
Date

Sharp XL-MP150E (serv.man3) Service Manual ▷ View online

XL-MP150H/MP150E
 i
Audio
XL-MP150H/MP150E
Service Manual
XLMP150H
Market
E
 
PRECAUTIONS FOR USING LEAD-FREE SOLDER
1. Employing lead-free solder
Example:
Indicates lead-free solder of tin, silver and copper.
2. Using lead-free wire solder
When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder
may cause damage or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40 C, we recommend you to use a
dedicated soldering bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station
or service branch in your area.
3. Soldering
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 C which is higher than the conventional lead solder by 40 C,
and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of
time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded,
remove the bit from the PWB as soon as you confirm the steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corrected. Make sure to turn on and off the
power of the bit as required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use
of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing
Ref No.
Description
Parts No.
PWB-A
92LPWB6285MANS
92LPWB6285PWRS
92LPWB6285CDUS
PWB-B
PWB-B
PWB-D
MAIN (A1),DISPLAY (A2),TERMINAL (A3),SWITCH (A4)/USB(A5) [XL-MP150H]
PWB-A
92LPWB6287MANS
92LPWB6287PWRS
MAIN (A1),DISPLAY (A2),TERMINAL (A3),SWITCH (A4) /USB(A5)[XL-MP150E]
POWER (B1),JACK (B2) [XL-MP150H]
POWER (B1),JACK (B2) [XL-MP150E]
CD MP3
"MAIN,DISPLAY,TERMINAL,SWITCH,USB,POWER,JACK,TUNER,CD MP3,CD MOTOR (PWB ONLY),
CD CHANGER MOTOR (PWB ONLY) PWB" of this model employs lead-free solder.
The LF symbol indicates lead-free solder, and is attached on the PWB and service manuals. The alphabetical character
following LF shows the type of lead-free solder.
92LPWB6289TUNS
PWB-C
PWB-E
PWB-F
TUNER [XL-MP150H]
92LPWB6291TUNS
PWB-C
TUNER [XL-MP150E]
CD MOTOR (PWB ONLY)
CD CHANGER MOTOR (PWB ONLY)
QPWBF0027AWZZ
QPWBF1055AWZZ
XL-MP150H/MP150E
1 – 1
Audio
XL-MP150H/MP150E
Service Manual
XLMP150H
Market
E
 
CHAPTER 1. 
GENERAL DESCRIPTION
[1] SAFETY PRECAUTION FOR SERVICE
MANUAL
Precaution to be taken when replacing and servicing the Laser Pickup.
The AEL (Accessible Emission Level) of Laser Power Output for this model is specified to be lower than Class 1 Requirements. However, the follow-
ing precautions must be observed during servicing to protect your eyes against exposure to the Laser beam.
1) When the cabinet has been removed, the power is turned on without a compact disc, and the Pickup is on a position outer than the lead-in posi-
tion, the Laser will light for several seconds to detect a disc. Do not look into the Pickup Lens.
2) The Laser Power Output of the Pickup inside the unit and replacement service parts have already been adjusted prior to shipping.
3) No adjustment to the Laser Power should be attempted when replacing or servicing the Pickup.
4) Under no circumstances look directly into the Pickup Lens at any time.
5) CAUTION - Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation
exposure. 
XL-MP150H
Laser Diode Properties
Material: GaAIAs
Wavelength: 795 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
A L T I S T A A K Ä Y T T Ä J Ä N T U R V A L L I S U U S L U O K A N 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN
I D E N N A B R U K S A N V I S N I N G S P E C I F I C E R A S . K A N
A N V Ä N D A R E N U T S Ä T T A S F Ö R O S Y N L I G L A S E R -
S T R Å L N I N G , S O M Ö V E R S K R I D E R G R Ä N S E N F Ö R
L A S E R K L A S S 1 .
ADVERSEL-SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
SE IKKE IND I STRÅLEN-HELLER IKKE MED OPTISKE INSTRUMENTER.
VARO! AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE ÄLÄ TUIJOTA SÄTEESEEN ÄLÄKÄ KATSO SITÄ
OPTISEN LAITTEEN LÄPI.
VARNING-SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. STIRRA EJ IN I STRÅLEN OCH BETRAKTA EJ
STRÅLEN GENOM OPTISKT INSTRUMENT.
XL-MP150E
Laser Diode Properties
Material: GaAIAs
Wavelength: 795 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or broad-
casting such material without permission of the relevant licensees or
owners of the copyright is prohibited by law. SHARP is not in a posi-
tion to authorise the copying or broadcasting of copyright materials
and nothing in this OPERATION MANUAL should be implied as giv-
ing that authority.
For other countries:
Audio-visual material may consist of copyrighted works which must
not be recorded without the authority of the owner of the copyright.
Please refer to the relevant laws in your country.
XL-MP150H/MP150E
1 – 2
[2] IMPORTANT SERVICE NOTES (FOR U.K.
ONLY)
Before returning the unit to the customer after completion of a repair or
adjustment it is necessary for the following withstand voltage test to be
applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
[3] SPECIFICATIONS
Set name
set value
Withstanding Voltage Tester
Test voltage
4,240 VPEAK
3,000 VRMS
Set time
6 secs
Set current (Cutoff current)
4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
PROBE
AC
OUT
UNIT
SHORT-CIRCUIT
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO GND OF CHASSIS
SCREW
WITHSTANDING
VOLTAGE TESTER
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL.
XL-MP150H
General
Amplifier
CD player
Tuner
Cassette deck
Speaker
Power source
AC 230 V, 50 Hz
Power
consumption
Power on:100 W
Power stand-by: 0.6 W(*)
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 307 mm (12")
Weight
6.1 kg (13.4 lbs.)
( * )This power consumption value is obtained when the demonstra-
tion mode is cancelled in the power stand-by mode.
Output power
PMPO: 752 W (total)
MPO: 376 W (188 W + 188 W) (DIN 45 324)
RMS: 200 W (100 W + 100 W) (DIN 45 324)
RMS: 160 W (80 W + 80 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals
Video/Auxiliary (audio signal):
500 mV/47 k ohms
USB input: USB type
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Frequency
response
50 - 14,000 Hz (normal tape)
Signal/noise ratio
50 dB (recording/playback)
Wow and flutter
0.35 % (DIN 45 511)
Type
2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer
Maximum input
power
200 W
Rated input power
100 W
Impedance
6 ohms
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 260 mm (10-1/4")
Weight
3.1 kg (6.8 lbs.)/each
XL-MP150H/MP150E
1 – 3
XL-MP150E for U.K.
General
Amplifier
CD player
Tuner
Cassette deck
Speaker
Power source
AC 230 - 240 V, 50 Hz
Power
consumption
Power on:100 W
Power stand-by: 0.6 W(*)
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 307 mm (12")
Weight
6.1 kg (13.4 lbs.)
( * )This power consumption value is obtained when the demonstra-
tion mode is cancelled in the power stand-by mode.
Output power
PMPO: 752 W (total)
MPO: 376 W (188 W + 188 W) (DIN 45 324)
RMS: 200 W (100 W + 100 W) (DIN 45 324)
RMS: 160 W (80 W + 80 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals
Video/Auxiliary (audio signal):
500 mV/47 k ohms
USB input: USB type
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Frequency
response
50 - 14,000 Hz (normal tape)
Signal/noise ratio
50 dB (recording/playback)
Wow and flutter
0.35 % (WRMS)
Type
2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer
Maximum input
power
200 W
Rated input power
100 W
Impedance
6 ohms
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 260 mm (10-1/4")
Weight
3.1 kg (6.8 lbs.)/each
XL-MP150E for Australia/New Zealand
General
Amplifier
CD player
Tuner
Cassette deck
Speaker
Power source
AC 230 - 240 V, 50 Hz
Power
consumption
100 W
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 307 mm (12")
Weight
6.4 kg (14.1 lbs.)
Output power
MPO: 376 W (188 W + 188 W) (10% T.H.D.)
RMS: 200 W (100 W + 100 W) (10% T.H.D.)
RMS: 160 W (80 W + 80 W) (0.9% T.H.D.)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals
Video/Auxiliary (audio signal):
500 mV/47 k ohms
USB input: USB type
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency range
FM: 87.50 - 108.00 MHz
AM: 522 - 1,620 kHz
Frequency
response
50 - 14,000 Hz (normal tape)
Signal/noise ratio
50 dB (recording/playback)
Wow and flutter
0.3 % (WRMS)
Type
2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer
Maximum input
power
200 W
Rated input power
100 W
Impedance
6 ohms
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 260 mm (10-1/4")
Weight
3.1 kg (6.8 lbs.)/each
Specifications for this model are subject to change without prior
notice.
Page of 108
Display

Sharp XL-MP150E (serv.man3) Service Manual ▷ Download

  • DOWNLOAD Sharp XL-MP150E (serv.man3) Service Manual ↓ Size: 5.22 MB | Pages: 108 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp XL-MP150E (serv.man3) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XL-MP150E (serv.man3) System. Information contained in Sharp XL-MP150E (serv.man3) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.