DOWNLOAD Sharp XL-HP700 (serv.man20) Service Manual ↓ Size: 3.36 MB | Pages: 60 in PDF or view online for FREE

– 5 –

■

1. Remote Control Transmitter
2. CD Direct Play Buttons
3. CD Track Down or Fast Reverse, Tape Fast Wind, 

Tuner Preset Down Button

4. Clock Button
5. Equaliser Mode Select Button
6. Extra Bass Button
7. On/Stand-by Button
8. CD Button
9. Tuner (Band) Button 

10. Tape Button 
11. Video/Auxiliary Button
12. CD Track Up or Fast Forward, Tape Fast Wind, 

Tuner Preset Up Button

13. Volume Up and Down Buttons
14. Disc Direct Search Buttons
15. CD Clear Button
16. CD Memory Button
17. CD Stop Button
18. CD Pause Button
19. Tape Reverse Mode Select Button
20. Tape Reverse Play Button
21. Tape Stop Button
22. CD Play or Repeat Button
23. Tape Record Pause Button
24. CD Random Button
25. Tape Forward Play Button
 

Buttons with " " mark in the illustration can be operated on the re-
mote control only.

– 6 –

1

Top Cabinet

1. Screw ...................... (A1) x5

6-1

2

Side Panel

1. Screw .................... (B1) x10

6-1

(Left/Right)

3

Rear Panel

1. Screw ...................... (C1) x8

6-2

2. Screw ...................... (C2) x2
3. Flat Cable ............... (C3) x1

4

CD Changer

1. Hook ........................ (D1) x2

6-2

Mechanism Unit

2. Socket ..................... (D2) x1

3. Flat Cable ............... (D3) x2

5

Front Panel

1. Screw ...................... (E1) x2

6-3

2. Hook ........................ (E2) x2
3. Socket ..................... (E3) x2
4. Flat Cable ............... (E4) x2

6

Cover, Heat Sink

1. Screw ....................... (F1) x4 6-2,7-1

7

Main PWB

1. Screw ...................... (G1) x3 6-2,7-1
2. Socket ..................... (G2) x1

7-1

8

Power PWB

1. Screw ...................... (H1) x4

7-1

9

Display PWB

1. Knob ......................... (J1) x1

7-2

2. Screw ....................... (J2) x9
3. Flat Cable ................ (J3) x1

10

Tape Mechanism 1. Screw ...................... (K1) x4

7-2

11

Headphones PWB 1. Screw ....................... (L1) x1

7-2

12

CD Servo PWB

1. Screw ...................... (M1) x3

7-3

(Note 1)

2. Socket ..................... (M2) x6

13

CD Changer

1. Screw ...................... (N1) x4

7-3

Mechanism Unit

2. Screw ...................... (N2) x2

7-4

3. Top Board ............... (N3) x1
4. Stabilizer Holder ..... (N4) x1
5. Disk Tray ................. (N5) x3
6. Screw ...................... (N6) x3
7. Guide,Mecha Holder .. (N7) x1
8. Screw ...................... (N8) x1
9. Stopper ................... (N9) x1
10. Holder,Mecha ..... (N10) x1
11. Screw .................. (N11) x4

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need to

be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

(A1) x2
ø3x12mm

(A1) x2
ø3x12mm

(A1) x1
ø3x10mm

(B1) x3
ø3x10mm

(B1) x2
ø3x10mm

(B1) x2
ø3x10mm

(B1) x2
ø3x10mm

(B1) x1
ø3x10mm

Side Panel

(Left)

Front Panel

Top Cabinet

Side Panel

(Right)

Rear
Panel

(F1) x2
ø3x6mm

(G1) x2
ø3x10mm

(C1) x8
ø3x10mm

(C3) x1

(D2) x1

(C2) x2
ø3x10mm

Front Panel

CD Servo PWB

Rear
Panel

Main PWB

Jack PWB

Hook
(D1)x1

Pull

Display PWB

Pull

Hook

(D1)x1

CD Changer
Mechanism Unit

(D3) x2

(E1) x2
ø3x10mm

(E3) x1

Front Panel

Hook
(E2)x1

(E3) x1

(E4) x2

Main PWB

Power PWB

Display PWB

Pull

Pull

Hook

(E2)x1

Tape
Mechanism

Note 1:
1. After removing the connector for the optical pickup from the

connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.

– 7 –

(G1) x1
ø3x6mm

(H1) x4
ø4x8mm

(G2) x1

(F1) x2
ø3x6mm

Main PWB

Cover,Heat Sink

Power PWB

(J2) x9
ø2.6x10mm

(K1) x4
ø3x10mm

(J3) x1

(L1) x1
ø3x10mm

(J1) x1

Front Panel

Display PWB

Tape
Mechanism

Open

Cassette
Holder

Headphones
PWB

(M1) x3
ø3x10mm

(N1) x2
ø3x10mm

(N1) x2
ø3x10mm

(M2) x6

CD Servo PWB

CD Changer
Mechanism Unit

1

Woofer

1. Net Frame ............... (A1) x1

7-5

2. Catching Holder ...... (A2) x4
3. Screw ...................... (A3) x4
4. Screw ...................... (A4) x4

2

Tweeter

1. Screw ...................... (B1) x2

7-5

Net Frame
(A1) x1

(A2) x2

(A3) x2
ø3x12mm

(A3) x2
ø3x12mm

(A4) x4
ø4x12mm

Woofer

Tweeter

(B1) x2
ø3x10mm

(A2) x2

(N2) x2
ø2 x7mm

(N6) x1
ø2.6 x12mm

(N6) x2
ø2 x6mm

(N11) x4
ø2.6 x10mm

(N4) x1

Stabilizer Holder

Push

Spring

Disc Tray 1

Disc Tray 2

Press in turns the arrow
parts, starting with the
uppermost one, to
withdraw the disc trays.

Disc Tray 3

Pawl

CD
Mechanism

Top Board
(N3) x1

(N7) x1

(N10) x1

1

(N8) x1
ø3 x3mm

(N5) x3

2
3

(N9) x1

Turn clockwise the
main cam to raise the
CD mechanism up to
the uppermost position.

– 8 –

Perform steps 1 to 10 of the disassembly method to remove
the tape mechanism.

1. When you remove the screws  (A1) x 2 pcs and  (A2) x 1 pcs.,

the record/playback head can be removed.

1. Carefully bend the pinch roller pawl in the direction of the

arrow <A>, and remove the pinch roller (B1) x 1 pc., in the
direction of the arrow <B>.

Note:
When installing the pinch roller, pay attention to the spring
mounting position.

1. Remove the main belt (C1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (C2) x 1 pc.

1. Remove the screws (D1) x 2 pcs., to remove the motor.

(A1)x2
Ø2x6mm

(A2)x1
Ø2x9mm

Record/Playback
Head

Erase Head

Clutch Ass'y

Pinch Roller
(B1)x1

Pinch
Roller
Pawl

Pull

Main Belt
(C1)x1

FF/REW
Belt
(C2)x1

Motor

FF/REW
Clutch

Flywheel

(D1)x2
Ø2.6x5mm

Motor

Clutch Ass'y