DOWNLOAD Sharp XL-HP605 Service Manual ↓ Size: 2.11 MB | Pages: 36 in PDF or view online for FREE

03/12/15

XL-HP605E(E)2.fm

XL-HP605E

TINSEA028AWZZ

 
In this example, the clock is set for the 24-hour (0:00) display.

To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.

[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the 

 

 or 

 

 button to display the time.

The time display will appear for about 10 seconds.

Note:
The "CLOCK" will appear or time will flash to confirm the time dis-
play when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.

To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour dis-
play) will be skipped.

Note:
The clock can also be set with the remote control.

"0:00"

The 24-hour display will appear.

 

(0:00 - 23:59)

"AM 12:00"

The 12-hour display will appear.

 

(AM 12:00 - PM 11:59)

"AM 0:00"

The 12-hour display will appear.

 

(AM 0:00 - PM 11:59)

Press the 

 

 or 

 

 button once to advance the time by 

1 hour. Hold it down to advance continuously.

Press the 

 

 or 

 

 button once to advance the time by 

1 minute. Hold it down to change the time in 5-minute intervals.

1

Clear all the programmed contents. [Refer to "Clearing all the 
memory (reset)" on page 31 for details.] 

2

Perform "Setting the clock" from step 1.

3

03/12/15

XL-HP605E(E)2.fm

XL-HP605E

TINSEA028AWZZ

This system can also play audio CD-R and CD-RW discs, but can-
not record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
 

! CD playback  

Be sure to place 8 cm (3") CD in the middle of the disc trays.

Total number of tracks on 
the CD whose number is 
flashing

Total playing time of the 
CD whose number is flash-
ing

"

" will appear.

CD play indicator

12 cm (5")

8 cm (3")

03/12/15

XL-HP605E(E)2.fm

XL-HP605E

TINSEA028AWZZ

" Playback will begin from track 1 on the DISC 1. After that disc fin-

ishes playing, the next disc will automatically play.

" After the last track on the fifth disc is played, the CD player stop

automatically.

" When there is no CD in one of the disc trays (1 - 5), the empty

tray will be skipped to the next tray with a CD.

To exchange other CDs whilst playing a disc:
Press one of the   1 -   5 buttons for the stopped disc and within 5
seconds, press the   OPEN/CLOSE button and exchange discs.

To remove the CDs:
In the stop mode, press the   1 -   5 button and within 5 seconds,
press the   OPEN/CLOSE button.

Caution:
" Do not place two CDs in one disc tray.
" Do not play discs with special shapes (heart- or octagon-

shaped). It may cause malfunctions.

" Do not push the disc tray whilst it is moving.
" If the power fails whilst the tray is open, wait until the power is

restored.

" If the disc tray is stopped with force, "ER-CD20" will appear on

the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.

" If TV or radio interference occurs during CD operation, move the

unit away from the TV or radio.

" If a disc is damaged, dirty, or loaded upside down, the disc will

skip.

Auto power on function:
When you press any of the following buttons, the unit turns on.
" CD button (main unit and remote control): The unit turns on and

the "CD" function is activated.

" CD   /   button on the remote control: The unit turns on and CD

playback starts (regardless of the last function).

"

 /   button on the main unit: The unit turns on and playback of

the last function starts (CD/TAPE/TUNER/VIDEO).

! Various CD functions

Press in the stop 
mode.

Press in the playback 
mode.

Press in the playback 
mode. Press the   /   
button to resume play-
back from the paused 
point.

Press in the playback 
or stop mode.
If you press the button 
in the stop mode, 
press the   /   button 
to start the desired 
track.

Press and hold down 
in the playback mode.
Release the button to 
resume playback.

" Track up/track down and fast forward/fast reverse are possible 

only within individual discs.

" When the end of the last track is reached during fast forward, "  

END" will appear on the display and CD operation will be paused. 
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
( : Last track number)

4

03/12/15

XL-HP605E(E)2.fm

XL-HP605E

TINSEA028AWZZ

! To specify a disc to play

You can play a disc by specifying the disc number.

" Playback will begin from track 1 on the chosen disc.
" After the last track on the chosen disc is played, the CD player

stops automatically.

Note:
If a disc tray with no disc is selected, playback will not start and the
disc indicator will go out.

To stop playback:
Press 

the  

(CD ) 

button.

! Direct track search

By using the direct search buttons, the desired tracks on the current
disc can be played.

If the direct search buttons are pressed whilst the disc is stopped,
press the   /   button to start the desired track on the current disc.

Notes:
" A track number higher than the number of tracks on the disc can-

not be selected.

" During random play, direct search is not possible.

Selected disc number

Selected track number

 

" The direct search buttons allow you to select up to number 9.
" When selecting number 10 or higher, use the "+10" button.

 

1 Press the "+10" button once.

2 Press the "3" button.

 

1 Press the "+10" button three times.

2 Press the "0" button.