DOWNLOAD Sharp XL-HP404 Service Manual ↓ Size: 1.97 MB | Pages: 36 in PDF or view online for FREE

03/10/9

XL-HP404E(E)3.fm

XL-HP404E

TINSEA004AWZZ

 
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio programme, and
use the daily timer as an alarm clock.

Note:
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.

!

Continued to the next page

The unit turns on and plays the desired source (CD, tuner, tape) at 
the preset time.

The unit turns on and starts recording from the tuner at the preset 
time.

 

 

Once timer play and once timer recording works for 
one time only at a prest time.

For example, if you are away but want to record a programme on a 
radio station.

 

Daily timer play and daily timer recording works at 
the same preset time everyday.

For example, set the alarm to sound every morning.

1

Set the daily timer (pages 25 - 27).

2

Set the once timer (pages 25 - 27).

Start

Daily timer

Once timer

1 minute or more

Stop

Start

Stop

1 Check that the clock is set to the correct time (refer to page 13).
2 For timer playback: Load a cassette or discs to be played.

For timer recording: Load a cassette for recording in the cas-

sette compartment.

Set the unit to the correct time if "ONCE" or "DAILY" does not 
appear.

8

03/10/9

XL-HP404E(E)3.fm

XL-HP404E

TINSEA004AWZZ

"

The "DAILY" indicator remains lit whilst setting the daily tim-
er.

"

The illustrations show the daily timer setting.

The illustrations show the timer playback setting in the daily tim-
er mode.

White

Red

To select the timer playback source: CD, TUNER (BAND) or 
TAPE.

To select the timer recording source: TUNER (BAND).

"

When you select the tuner, select a station by pressing the 

 or 

 button, and then press the MEMORY/SET button.

"

If a station has not been programmed, " NO P.SET" will be 
displayed and timer setting will be cancelled.

Do not turn the volume up too high.

03/10/9

XL-HP404E(E)3.fm

XL-HP404E

TINSEA004AWZZ

 
To check the timer setting:

Cancelling the timer playback or timer recording:
Timer is cancelled by turning the power on whilst in the timer stand-
by mode. The same operation can be performed in the following
procedure without turning the power on.

Reusing the timer:
Using the same setting;
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.

Changing the setting;
Turn the power on, and repeat the operation from step 1 in "Timer
playback or timer recording".

Note:
The timer can also be set with the remote control.

In the timer playback mode, the volume will increase gradually 
until it reaches the volume you were listening to before your 
system entered the timer stand-by mode.

The timer will be cancelled.

The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is cancelled. Cancel the daily tim-
er when it is not used.

When performing timer playback or recording using another unit con-
nected to the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 9.
This unit will turn on or enter the power stand-by mode automatically, 
however, the connected unit will not turn on or off.

1 In the timer stand-by mode, press the CLOCK/TIMER button. 
2 Within 10 seconds, press the 

 or 

 button to select "ONCE" or 

"DAILY", and press the MEMORY/SET button. 

3 Within 10 seconds, press the 

 or 

 button to select "ONCE 

CAL" or "DAILY CAL", and press the MEMORY/SET button. 
The unit returns to the timer stand-by mode after displaying the 
settings in order.

1 In the timer stand-by mode, press the CLOCK/TIMER button. 
2 Within 10 seconds, press the 

 or 

 button to select "ONCE" or 

"DAILY", and press the MEMORY/SET button. 

3 Within 10 seconds, press the 

 or 

 button to select "ONCE 

OFF" or "DAILY OFF", and press the MEMORY/SET button. 
Timer will be cancelled (the setting will not be cancelled).

1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the 

 or 

 button to select "ONCE" or 

"DAILY", and press the MEMORY/SET button. 

3 Within 10 seconds, press the 

 or 

 button to select "ONCE 

ON" or "DAILY ON", and press the MEMORY/SET button. 

8

03/10/9

XL-HP404E(E)3.fm

XL-HP404E

TINSEA004AWZZ

!

The radio, compact disc and cassette tape can all be turned off
automatically.

To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, proceed as follows.

 

!

You can play back the same source only (the function cannot be
switched).

Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.

"

3 hours - 5 minutes   5-minute intervals

"

5 minutes - 1 minute   1-minute intervals

"SLEEP" will appear.

The volume will be turned down 1 minute before the sleep op-
eration finishes.

1

Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 or 

 button to select "SLEEP 

X : XX".
"X : XX" is sleep remaining time.

"

The remaining sleep time is displayed for about 10 seconds.

"

You can change the remaining sleep time whilst it is displayed by 
pressing the MEMORY/SET button (steps 4 - 5).

1

Press the CLOCK/TIMER button.

2

Within 10 seconds, press the 

 or 

 button to select "SLEEP 

OFF", and press the MEMORY/SET button. 

1

Set the sleep time (see left, steps 1 - 5).

2

Whilst the sleep timer is set, set the desired playback time 
(steps 2 - 10, pages 25 - 26).

Sleep timer setting

Timer playback setting

Sleep operation will 
automatically stop.

Timer playback
start time

1 minute - 3 hours