DOWNLOAD Sharp XL-HF401PH (serv.man5) Service Manual ↓ Size: 6.71 MB | Pages: 50 in PDF or view online for FREE

Model
XL-HF401PH (serv.man5)
Pages
50
Size
6.71 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio / System / (European)Supplement
File
xl-hf401ph-sm5.pdf
Date

Sharp XL-HF401PH (serv.man5) Service Manual ▷ View online

XL-HF401PH
 – 1
iPhone, iPod, iPod classic, iPod nano, and iPod touch are 
trademarks of Apple Inc., registered in the U.S. and other 
countries. iPad is a trademark of Apple Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean 
that an electronic accessory has been designed to connect 
specifically to iPod, iPhone, or iPad, respectively, and has been 
certified by the developer to meet Apple performance standards. 
Apple is not responsible for the operation of this device or its 
compliance with safety and regulatory standards. Please note 
that the use of this accessory with iPod, iPhone, or iPad may 
affect wireless performance.
PRECAUTIONS FOR USING LEAD-FREE SOLDER
CHAPTER 1. GENERAL DESCRIPTION
[1]  Safety Precaution For Service Manual .......
...... 1-1
[2] Specifications...............................................
...... 1-1
[3]  Name Of Parts .............................................
...... 1-2
CHAPTER 2. ADJUSTMENTS
[1] CD 
Section .................................................. 2-1
[2] Test 
Mode .................................................... 2-1
[3]  Standard Specification Of Stereo System 
Error Message Display Contents ................. 2-1
CHAPTER 3. MECHANICAL DESCRIPTION
[1] Disassembly ................................................ 3-1
CHAPTER 4. FLOWCHART
[1] Troubleshooting ........................................... 4-1
CHAPTER 5. MAJOR PART DRAWING
[1]  Function Table Of IC .................................... 5-1
[2] FL 
Display.................................................... 5-5
CHAPTER 6. CIRCUIT DESCRIPTION
[1]  Waveforms Of Servo Circuit ........................ 6-1
[2] Voltage......................................................... 6-2
CHAPTER 7. DIAGRAM
[1] Block 
Diagram ............................................. 7-1
CHAPTER 8. CIRCUIT SCHEMATICS AND PARTS
LAYOUT
[1]  Notes On Schematic Diagram ..................... 8-1
[2]  Type Of Transistor And LED ........................ 8-1
[3] Schematic 
Diagram ..................................... 8-2
[4]  Chart Of Connecting Wires.......................... 8-7
[5]  Wiring Side Of PWB .................................... 8-8
PARTS GUIDE
  SERVICE MANUAL
No. S3210XLH401HH
CONTENTS
HI FI COMPONENT SYSTEM
MODEL
XL-HF401PH Hi Fi Component System consisting of 
XL-HF401PH (main unit) and CP-HF401H (speaker system).
XL-HF401PH
SHARP CORPORATION
Parts marked with " 
 " are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
!
• In the interests of user-safety (Required by safety regulations in
some countries) the set should be restored to its original condition
and only parts identical to those specified be used.
XL-HF401PH
 – 2
 
1.
Example:
Indicates lead-free solder of tin, silver and copper.
Lead-free wire solder for servicing
Ref No.
Description
Parts No.
PWB-A
PWB-B
92LPWB8624MANS
RUiTZA059AWZZ
MAIN (A1), DISPLAY (A2), KEY/JACK (A3), iPod (A4), USB (A5)
SMPS
PWB-C
RUiTZA057AWZZ
AIRPLAY
2.
3.
Using lead-free wire solder
When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional 
lead wire solder may cause damage or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40˚C, we recommend you 
to use a dedicated soldring bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, 
contact our service station or service branch in your area. 
Soldering
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220˚C which is higher than the conventional lead 
solder by 40˚C, and as it has poor solder wet ability, you may be apt to keep the soldering bit in contact with the 
PWB for extended period of time. However, since the land may be peeled off or the maximum heat-resistance 
temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering 
condition. 
Lead-free solder contains more tin, and the end of the soldering bit may be easily corrected. Make sure to turn on 
and off the power of the bit as required. 
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after 
every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper. 
Be careful when replacing parts with polarity indication on the PWB silk.
Employing lead-free solder
"MAIN, DISPLAY, KEY/JACK, iPod, USB, SMPS, AIRPLAY PWB" of this model employs lead-free solder.
The LF symbol indicates lead-free solder, and is attached on the PWB and service manuals. The alphabetical  
character following LF shows the type of lead-free solder.
PRECAUTIONS FOR USING LEAD-FREE SOLDER
i
XL-HF401PH
1 – 3
CHAPTER 1. GENERAL DESCRIPTION
[1] Safety Precaution For Service Manual
[2] Specifications
General
Amplifier
Tuner
USB
Speaker
Power source
Power consumption
Dimensions
Weight
 ( * )This power consumption value is obtained when the 
demonstration mode is cancelled in the power stand-by mode. 
Output power
PMPO : 200 W
MPO: 100 W (50 W + 50 W) (10% T.H.D.)
RMS: 100 W (50 W + 50 W) (10% T.H.D.)
RMS: 66 W (33 W + 33 W) (1% T.H.D.) 
Output terminals
Speakers: 4 ohms
20Hz - 20kHz
Subwoofer Pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Video output: 1 Vp-p
Headphones: 16 ohms
(recommended: 32 ohms) 
Input terminals
Audio In (audio signal):
500 mV/47 k ohms 
Frequency range
FM: 87.5 - 108.0 MHz
Type
2-way type speaker system
2.5 cm (1") Dome-Tweeter
12 cm (4-3/4") woofer
Maximum input 
power
100 W
Rated input power
50 W
Impedance
4 ohms
Dimensions
Width: 148 mm (5-13/16") 
Height: 262 mm (10-5/16")
Depth: 203.5 mm (8")
Weight
2.5 kg (5.4 lbs.)/each
This product is classified as a CLASS 1 LASER PRODUCT.
Precaution to be taken when replacing and servicing the 
Laser Pickup.
The AEL (Accessible Emission Level) of Laser Power Output is 
less than Class 1 but the laser component is capable of emitting 
radiation exceeding the limit for Class 1. Therefore it is important 
that the following precautions must be observed during servicing 
to protect your eyes against exposure to the Laser beam.
(1) When the cabinet has been removed, the power is turned on 
 
without a compact disc, and the Pickup is on a position outer
 
than the lead-in position, the Laser will light for several  
 
seconds to detect a disc. Do not look into the Pickup Lens.
(2) The Laser Power Output of the Pickup inside the unit and  
 
replacement service parts have already been adjusted prior
 to 
shipping.
(3) No adjustment to the Laser Power should be attempted when 
 
replacing or servicing the Pickup.
(4) Under no circumstances look directly into the Pickup Lens at 
 any 
time.
(5) CAUTION -Use of controls or adjustments, or performance of 
 
procedures other than those specified herein may result in   
 
hazardous radiation exposure.
Laser Diode Properties
 Material: 
AIGaAs
 Wavelength: 790 nm
 Emission Duration: continuous
 
Laser Output: max. 0.7 mW
Line in (Analogue input):
500 mV/47 k ohms
CD player
Type
Single disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser 
pickup
D/A converter
Multi bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
USB host interface
Complies with USB 1.1 (Full Speed)/
2.0 Mass Storage Class.  
Support Bulk only and CBI protocol. 
Support file
MPEG 1 Layer 3
WMA (Non DRM)
Bitrate support
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Other
Maximum total number of MP3/WMA files
is 65025. 
Maximum total number of folders is 999
INCLUSIVE of root directory.  
The ID3TAG information supported are
TITLE, ARTIST and ALBUM only.  
Supports ID3TAG version 1 and version 2. 
File system 
support
Support USB devices with Microsoft
Windows/DOS/FAT12/FAT 16/ FAT 32.  
2 kbyte block length for sector.
40 (FM station)
Preset
ADVERSEL-SYNLIG OG USYNLIG LASERSTRÅLING VED 
ÅBNING.SE IKKE IND I STRÅLEN-HELLER IKKE MED OPTISKE 
INSTRUMENTER. VARO! 
AVATTAESSA OLET 
ALTTIINA 
NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE ÄLÄ 
TUIJOTA SÄTEESEEN ÄLÄKÄ KATSOSITÄ OPTISEN 
LAITTEEN LÄPI. VARNING-SYNLIG OCH OSYNLIG LASER-
STRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. STIRRA EJ IN 
I STRÅLEN OCH BETRAKTA EJ STRÅLEN GENOM 
OPTISKT INSTRUMENT. 
AC 220 - 240 V ~ 50/60 Hz
Power on: 40 W
Power stand-by: 0.4 W (*)
Width: 215 mm (8 - 1/2")
Height: 96 mm (3 - 4/5")
Depth: 335 mm (13 - 1/5")
2.8 kg (6.2 lbs.)
136 mm (5 - 2/5") (with Wi-Fi 
aerial upright)
1 – 1
XL-HF401PH
1 – 4
[3] Names Of Parts
Front panel
  1. Wi-Fi aerial
  2. Remote sensor
  3. Timer indicator
  4. Disc Tray
  5. Docking Station for iPod or iPhone
  6. Volume Control
  7. On/Stand-by Button
  8. FUNCTION Button
  9. USB/iPad Terminal
10. Audio In Socket
11. Headphone Socket
12. Tuner Preset Down, CD/USB Track Down,
    iPod/iPhone/iPad Skip Down
13. Tuner Preset Up, CD/USB Track Up,
    iPod/iPhone/iPad Skip Up
14. Disc/USB Stop Button
15. Disc/USB/iPod/iPhone/iPad Play or
   Pause Button
16. Disc Tray Open/Close Button
Display
 1. USB Indicator
 2. iPod Indicators
 3. CD Indicator
 4. MP3 Indicator
 5. WMA Indicator
  6. RDM (Random) Indicator
 7. MEM (Memory) Indicator
 8. Repeat Indicator
 9. Play/Pause Indicator
10. Tuning FM/AM Indicator
11. FM Stereo Mode Indicator
12. Stereo Station Indicator
13. RDS Indicator
14. PTY Indicator
15. TP Indicator
16. TA Indicator
17. Muting Indicator
18. X-bass Indicator
19. Title Indicator
20. Artist Indicator
21. Folder Indicator
22. Album Indicator 
23. File Indicator
24. Track Indicator
25. Daily Timer Indicator
26. Once Timer Indicator
27. Disc  Indicator
28. Total  Indicator
29. Sleep  Indicator
Speaker system
 1.  Dome-Tweeter
 2.  Woofer
  3.  Bass Reflex Duct
 4.  Speaker Terminal
 
1
4 5
6 7 8
9
10 11
13
12
14
15
16
29
28
27
2526
24
23
20
19
22
21
17
1
8
2 3
2
1
3
4
2
10
7
8
9
11
12 13 14 15 16
6
3
4
5
1
1 – 2
Page of 50
Display

Sharp XL-HF401PH (serv.man5) Service Manual ▷ Download

  • DOWNLOAD Sharp XL-HF401PH (serv.man5) Service Manual ↓ Size: 6.71 MB | Pages: 50 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp XL-HF401PH (serv.man5) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XL-HF401PH (serv.man5) System. Information contained in Sharp XL-HF401PH (serv.man5) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.