Sharp XL-HF202PH (serv.man6) Service Manual ▷ View online
XL-HF202PH/XL-HF302PH
2
– 3
6) A message will appear asking if you want to install the app. Tap on ‘Install’ to proceed. When installation is completed,
tap on ‘Open’ to launch the app (refer Figure 3). SHARP Tag Writer main page will be shown as Figure 4 below.
Go to ‘Setting’ menu by pressing on the phone left button. Then tap on ‘Setting’. (Refer Figure 5)
2
Setting menu is displayed as Figure 6 above. Key in model name (Eg. SHARP XL-HF202).
Note:
Note:
Keep a space between SHARP and XL-HF202.
Check the ‘Lock tag after write’ box, then tap on ‘OK’ to return to main page.
Note:
Note:
It is important to check the ‘Lock tag after write’ box to avoid customer from rewriting the tag.
3
4
Figure 5
Figure 6
Figure 3
Figure 4
XL-HF202PH/XL-HF302PH
2
– 4
On main page,
Make sure model name is correct (Eg. SHARP XL-HF202) - depends on model name.
Make sure COD (Class of Device) is correct (240404) - this value is fixed.
Key in address: 12 digit hexadecimal Bluetooth MAC ID (Eg. xx:xx:xx:xx:xx:xx)
Make sure COD (Class of Device) is correct (240404) - this value is fixed.
Key in address: 12 digit hexadecimal Bluetooth MAC ID (Eg. xx:xx:xx:xx:xx:xx)
Each device has a unique MAC ID address assigned to each Serial No.. Refer to Serial No. vs. MAC ID database.
Please email below contact person for the database :
Mr. Leow Yuet Soon
Customer Service Division,
S&O Electronics (M) Sdn. Bhd.
e-mail : leowys@soem.sharp-world.com
5
Next, the writing process can begin.
Touch the NFC smartphone onto the tag (within 2 - 3 seconds) until the screen pop up message “Write tag successful” appears.
Information will be written into the NFC tag. Tap on ‘OK’ to exit pop up message.
If “Fail to write tag” message pops up when writing is in progress, tap on ‘Retry’ and try again until successful.
Note:
Touch the NFC smartphone onto the tag (within 2 - 3 seconds) until the screen pop up message “Write tag successful” appears.
Information will be written into the NFC tag. Tap on ‘OK’ to exit pop up message.
If “Fail to write tag” message pops up when writing is in progress, tap on ‘Retry’ and try again until successful.
Note:
The location of NFC antenna on a smartphones varies between brands. Refer to smartphone’s User Manual for more
information.
6
NFC tag is ready to be sent to customer.
7
XL-HF202PH/XL-HF302PH
2
– 5
-MEMO-
XL-HF202PH/XL-HF302PH
3 – 1
CD-ES700/CD-ES77
CD-ES700/CD-ES77
Service Manual
CD-ES700/CD-ES77
Market
E
CHAPTER 3. MECHANICAL DESCRIPTION
[1] Disassembly
Caution On Disassembly
Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing
Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were before disassembling.
Figure 2
Figure 3
STEP
REMOVAL
PROCEDURE
FIGURE
1
Top Cabinet
with Bluetooth
PWB
with Bluetooth
PWB
1. Screw..................(A1) X 6
2. Socket ................(A2) X 3
2. Socket ................(A2) X 3
1
2
2
2
Rear Panel
1. Screw..................(B1) X 7
2. Screw..................(B2) X 1
2. Screw..................(B2) X 1
1
3
Main PWB
1. Screw..................(C1) X 2
2. Socket ................(C2) X 5
3. Flat Cable ...........(C3) X 2
2. Socket ................(C2) X 5
3. Flat Cable ...........(C3) X 2
2
4
Front Panel
Assy
Assy
1. Screw..................(D1) X 2
2. Screw..................(D2) X 2
3. Socket ................(D3) X 1
4. Hook ...................(D4) X 2
2. Screw..................(D2) X 2
3. Socket ................(D3) X 1
4. Hook ...................(D4) X 2
2
5
SMPS PWB
1. Screw..................(E1) X 2
2. Socket ................(E2) X 1
2. Socket ................(E2) X 1
3
2
2
6
CD Mechanism
Assy
Assy
1. Screw..................(F1) X 4
3
7
CD Mechanism
Unit
Unit
1. Screw................. (G1) X 4
4
8
Display PWB
1. Knob ...................(H1) X 1
2. Nut ......................(H2) X 1
3. Washer ...............(H3) X 1
4. Screw..................(H4) X 3
2. Nut ......................(H2) X 1
3. Washer ...............(H3) X 1
4. Screw..................(H4) X 3
5
9
Key/Jack PWB
1. Screw..................(J1) X 4
5
10
USB PWB
1. Screw..................(K1) X 1
5
11
Bluetooth PWB
1. Screw................. (L1) X 3
6
Hook
(D4)x1
PULL
(C1)x2
M3x8mm
Front Panel Assy
(A2)x1
Hook
(D4)x1
PULL
(D1)x1
M3x8mm
(D2)x2
M3x8mm
Main
PWB
(C2)x1
Main PWB
(C2)x1
(A2)x2
(C3)x1
(C2)x1
(C2)x1
(C3)x1
(D1)x1
M3x8mm
(D3)x1
(C2)x1
SMPS PWB
(E2)x1
SMPS PWB
(E1)x2
M3x8mm
CD Mechanism Assy
(F1)x4
Special Screw
(G1)x4
Special Screw
CD Mechanism Assy
CD Mechanism Unit
Figure 4
Figure 1
Rear Panel
(A1)x1
M3x8mm
Front Panel Assy
Top Cabinet
with iPod PWB
(A1)x1
M3x8mm
(B1)x7
M3x8mm
(A1)x4
M3x8mm
(B2)x1
M3x6mm
Click on the first or last page to see other XL-HF202PH (serv.man6) service manuals if exist.