DOWNLOAD Sharp XL-DAB151PHBK (serv.man2) Service Manual ↓ Size: 5.2 MB | Pages: 28 in PDF or view online for FREE

11/8/1

01_XLDAB151PH EN_UK.fm

Press the ON/STAND-BY button to turn the power on.

To dim the display brightness, press the DEMO/DIMMER button on
the remote control.

If you turn off and on the main unit with the volume set to 17 or higher,
the volume starts at 16.

Turn the volume knob towards VOLUME +/– (on main unit) or press
VOL +/– (on remote control) to increase or decrease the volume.

When you press any of the following buttons, the unit turns on.

● iPod, CD, USB, AUDIO / LINE (INPUT), TUNER/DAB on the

remote control: Selected function is activated.

●

/  button on the main unit: The unit turns on and playback of

the last function will start (CD, TUNER/DAB, USB, iPod, AUDIO
IN, LINE IN)

The main unit will enter the stand-by mode (when iPod or iPhone is
not docked) after 15 minutes of inactivity during:
iPod: No connection.
AUDIO IN / LINE IN: No detection of input signal or very low sound

audibility.

CD / USB: In the stop mode.
Note:
However, if iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed during standby mode.

The volume is muted temporarily when pressing the MUTE button on
the remote control. Press again to restore the volume.

When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and “X-BASS” will
appear. To cancel the extra bass mode, press the X-BASS button on
the remote control.

Press the BASS/TREBLE button to select “Bass”.

Within 5 seconds, press the VOLUME (+ or –) button to adjust the
bass.

Press the BASS/TREBLE button to select “Treble”.

Within 5 seconds, press the VOLUME (+ or –) button to adjust the
treble.

When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.

Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.

In this example, the clock is set for the 24-hour (00:00) display.

■ To turn the power on

After use:
Press the ON/STAND-BY button to enter the power stand-by mode.

■ Display brightness control

■ Volume auto set-in

■ Volume control

■ Auto power on function

■ Auto power off function

■ Muting

■ X-Bass control

Dimmer 1

Dimmer 2

Dimmer off

(Display is dim).
(Display gets dimmer).

(Display is bright).

■ Bass control

■ Treble control

■ Function

Press the ON/STAND-BY button to turn the power on.

Press the CLOCK/TIMER button.

Within 10 seconds, press the ENTER button. To adjust the day,
press the 

 or 

 button and then press the ENTER

button.

Press the 

 or 

 button to select 24-hour or 12-hour

display and then press the ENTER button. 

The 24-hour display will appear.
(00:00 -  23:59)

The 12-hour display will appear.
(AM 12:00 - PM 11:59)

- 5 ↔ - 4........↔ + 4 ↔ + 5

- 5 ↔ - 4........↔ + 4 ↔ + 5

FM STEREO

FM MONO

USB

iPod

Audio In

Line In

CD

DAB

11/8/1

01_XLDAB151PH EN_UK.fm

To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.

Note:
When power supply is restored after unit is plugged in again 
or after a power failure, reset the clock (pages 8 - 9).

To readjust the clock:
Perform “Setting the clock” from step 2.

To change the 24-hour or 12-hour display:
Perform “Setting the clock” from step 2 onwards.

● iPod touch (4

th

 generation)

● iPod touch (3

rd

 generation)

● iPod touch (2

nd

 generation)

● iPod touch (1

st

 generation)

● iPod classic

● iPod nano (6

th

 generation)

● iPod nano (5

th

 generation)

● iPod nano (4

th

 generation)

● iPod nano (3

rd

 generation)

● iPod nano (2

nd

 generation)

● iPhone 4

● iPhone 3GS

● iPhone 3G

● iPhone

● iPad
Caution:
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple’s
homepage to download the latest version for your iPod,
iPhone and iPad.
Notes:

● Charging terminal for iPod, iPhone and iPad:

● The message “This accessory is not made to work with

iPhone” or similar, may appear on the iPhone screen
when:
- battery is low.
- the iPhone is not properly docked (eg. slanting). 

If this occurs, remove and re-dock the iPhone.

● This product is made for iPhone. To prevent random

Note:
USB terminal do not support VIDEO out.

Press the ON/STAND-BY button to turn the power on.

Press the USB button on the remote control or FUNCTION button
repeatedly on the main unit to select USB function.

Connect iPod, iPhone or iPad to the unit. “USB/iPod” will
appear.

Press the /  (CD/USB  / ) button to start playback.

Note:
Stop button ( ) is invalid during iPod, iPhone or iPad playback.

Docking station is not recommended for iPad connection.

● Please use the adaptor supplied with your iPod or iPhone unit.

● You can use an audio cable to connect your iPod to the AUDIO

IN socket if: 
1. your iPod adaptor does not fit into the iPod dock on the

main unit.

2. you have an iPod that does not have an iPod adaptor.
3. you have an iPod that does not have an iPod 30 pin

connector.

 To adjust the hour, press the  

or   

button

and then press the ENTER button. Press the  

or

 button once to advance the time by 1 hour. Hold

it down to advance continuously.

To adjust the minutes, press the  

or   

button

and then press the ENTER button. Press the  

or

 button once to advance the time by 1 minute.

USB function

NO

YES

Other function

YES

NO

Stand-by

YES

NO

■ iPod, iPhone and iPad connection 

Insert the connector to the iPod, iPhone or iPad.

Place the iPad to the stand for iPad.

Connect the iPod, iPhone or iPad to the unit via USB
connector.

■ iPod, iPhone or iPad playback

■ iPod and iPhone connection (Dock only)

iPad

Connector

iPad

Stand for 
iPad

USB

11/8/1

01_XLDAB151PH EN_UK.fm

Caution:
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.

● Sound will only switch from iPhone to the main unit after

authentication process is completed in approximately 10
seconds.

● Incoming calls will pause the playback. 

● Once the calls are answered, the conversation can only be

heard through the built-in iPhone speaker. Turn on the
iPhone speaker or undock the iPhone to start conversation.

Simply remove the iPod or iPhone from the docking station or
iPad from USB terminal. It is safe to do so even during
playback.

● If the TV Out setting is already turned on at video menu, the

video is automatically displayed on the TV screen when
ENTER key is pressed.

● TV out display is not support through USB terminal. (iPad)

● To return to watching video on iPod or iPhone screen, press

the MENU button to enter video menu. Then press the
DISPLAY (TV OUT) button for more than 2 seconds until
“iPod Display” appears. 

● During iPod or iPhone video playback, pressing the DISPLAY

(TV OUT) button will not toggle video out display between
iPod and TV.

● Unplug all accessories for the iPod or iPhone before inserting

it into the docking station.

● Stop button ( ) at main unit is invalid during iPod function.

iPhone

4GB & 8GB & 16GB

iPhone 3G

8GB & 16GB

iPhone 3GS

16GB & 32GB

iPhone 4

16GB & 32GB

■ To insert adaptor for iPod or iPhone

Open the docking station for iPod and iPhone by pulling
up.

Insert the adaptor for iPod and iPhone into unit and
connect your iPod or iPhone.

■ To remove adaptor for iPod or iPhone

Insert the tip of a screwdriver (“–” type, 
small) into the adaptor hole as shown 
and lift upward to remove.

■ iPod or iPhone playback

Press the ON/STAND-BY button to turn the power on.

Press the iPod button on the remote control or FUNCTION
button repeatedly on the main unit to select iPod function.

Insert iPod or iPhone unit in iPod dock of main unit.  “Dock
Ok” will appear.

Press the  /  (iPod  / ) button to start playback.

iPhone

Dock connector

iPhone (bottom)

Dock for iPhone

Connector for iPhone

Adaptor for iPhone 

■ iPhone playback

■ To disconnect iPod, iPhone or iPad

■ Watching videos on a TV connected to 

Press the DISPLAY (TV OUT) button for more than 2
seconds. “TV Display” will appear on display.

Press the ENTER button to start playback.

11/8/1

01_XLDAB151PH EN_UK.fm

Note:
When navigating the iPod, iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or iPhone
unit. The volume level is adjusted by pressing the VOL (+ or –)
button on the main unit or the remote control. Adjusting the
volume on the iPod, iPhone or iPad units give no effect.

iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod ,
iPhone and iPad you are using.

System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units
will automatically power on when docked or connected in the unit.

System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod,
iPhone or connected iPad unit will automatically turn to stand-by
mode.

This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record
on them. Some audio CD-R and CD-RW discs may not be
playable due to the state of the disc or the device that was used
for recording.

● This system supports MPEG 1 Layer 3 and VBR files.

● During VBR file playback, time counter in the display may

differ from its actual playback time.

● Bitrate which is supported by MP3 is 32 ~ 320 kbps.

● “MP3” and “WMA” indicator will light up after the unit reads

information on an MP3 or WMA disc.

● Bitrate which is supported by WMA is 64 ~ 160 kbps.

■ Navigating the iPod,  iPhone or iPad 

Press the iPod MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to previous
menu.

Use the PRESET (

 or 

) button to select an item on the

menu and then press ENTER button.

■ Various iPod, iPhone and iPad functions

Press in the pause 
mode.

Press in the 
playback mode.

Press in the 
playback or pause 
mode. 
If you press the 
button in the pause 
mode, press the  /

 button to start the 

desired track.

Press and hold 
down in the 
playback mode.

Release the button 
to resume 
playback.

____ 

____

Press for more than 
2 seconds to toggle 
the video out 
display between 
iPod or TV.

____ 

Press to toggle 
repeat mode.

____ 

Press to toggle 
shuffle mode.

____ 

Press to view the 
iPod menu during 
iPod function.

____ 

Press to confirm the 
selection.

____ 

Press to select in 
the iPod menu.

■ Disc playback

Press the ON/STAND-BY button to turn the power on.

Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.

Press the OPEN/CLOSE button to open the disc tray.

Place the disc on the disc tray, label side up.