Sharp XL-560E User Manual / Operation Manual ▷ View online
MICRO COMPONENT SYSTEM
OPERATION MANUAL
MODEL
XL-570E
XL-560E
XL-560E
XL-560E micro component system consisting of
XL-560E micro component system and CP-
XL560H speaker system.
XL-560E micro component system and CP-
XL560H speaker system.
CONTENTS
Page
SPECIAL NOTES . . . . . . . . . . . . . . . . . . . . . . 1
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 2
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . 2
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . 2
PREPARATION FOR USE . . . . . . . . . . . . . . 3-5
SOUND CONTROL . . . . . . . . . . . . . . . . . . . . . 6
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . 7
COMPACT DISC OPERATION . . . . . . . . . 8-10
CASSETTE OPERATION . . . . . . . . . . . . . . . 11
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 2
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . 2
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . 2
PREPARATION FOR USE . . . . . . . . . . . . . . 3-5
SOUND CONTROL . . . . . . . . . . . . . . . . . . . . . 6
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . 7
COMPACT DISC OPERATION . . . . . . . . . 8-10
CASSETTE OPERATION . . . . . . . . . . . . . . . 11
Page
RADIO OPERATION . . . . . . . . . . . . . . . . . 12-13
RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . 14
HOW TO USE THE BUILT-IN TIMER . . . 15-16
USING EXTERNAL UNITS . . . . . . . . . . . . . . 17
RESETTING THE MICROCOMPUTER . . . . 17
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . 18
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . 18
TERMS OF GUARANTEE . . . . . . .Back cover
RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . 14
HOW TO USE THE BUILT-IN TIMER . . . 15-16
USING EXTERNAL UNITS . . . . . . . . . . . . . . 17
RESETTING THE MICROCOMPUTER . . . . 17
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . 18
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . 18
TERMS OF GUARANTEE . . . . . . .Back cover
XL-570E micro component system consisting of
XL-570E micro component system and CP-
XL570H speaker system.
XL-570E micro component system and CP-
XL570H speaker system.
SPECIAL NOTES
NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-
rewireable (moulded) plug incorporating a 3A fuse.
Should the fuse need to be replaced, a BSI or ASTA
approved BS 1362 fuse marked or and of the
same rating as above, which is also indicated on the
pin face of the plug must be used.
rewireable (moulded) plug incorporating a 3A fuse.
Should the fuse need to be replaced, a BSI or ASTA
approved BS 1362 fuse marked or and of the
same rating as above, which is also indicated on the
pin face of the plug must be used.
Always refit the fuse cover after replacing the fuse.
Never use the plug without the fuse cover fitted.
Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home
not being compatible with the plug supplied, cut-off the
mains plug and fit an appropriate type.
not being compatible with the plug supplied, cut-off the
mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and
the cut-off plug destroyed immediately and disposed
of in a safe manner.
The fuse from the cut-off plug should be removed and
the cut-off plug destroyed immediately and disposed
of in a safe manner.
Under no circumstances should the cut-off plug be in-
serted elsewhere into a 13A socket outlet as a serious
electric shock may occur.
serted elsewhere into a 13A socket outlet as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the
instructions below:
instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance
with the following code:
The wires in the mains lead are coloured in accordance
with the following code:
Blue
: Neutral
Brown
: Live
As the colours of the wires in the mains lead of this
product may not correspond with the coloured mark-
ings identifying the terminals in your plug, proceed as
follows:
product may not correspond with the coloured mark-
ings identifying the terminals in your plug, proceed as
follows:
●
The wire which is coloured blue must be connected
to the plug terminal which is marked N or coloured
black.
to the plug terminal which is marked N or coloured
black.
●
The wire which is coloured brown must be con-
nected to the plug terminal which is marked L or
coloured red.
nected to the plug terminal which is marked L or
coloured red.
●
Recording and playback of any material may require
consent, which SHARP is unable to give. Please refer
particularly to the provisions of the Copyright Act
1956, the Dramatic and Musical Performers Protection
Act 1958, the Performers Protection Acts 1963 and
1972 and to any subsequent statutory enactments and
orders.
consent, which SHARP is unable to give. Please refer
particularly to the provisions of the Copyright Act
1956, the Dramatic and Musical Performers Protection
Act 1958, the Performers Protection Acts 1963 and
1972 and to any subsequent statutory enactments and
orders.
●
This equipment complies with the requirements of Di-
rectives 89/336/EEC and 73/23/EEC as amended by
93/68/EEC.
rectives 89/336/EEC and 73/23/EEC as amended by
93/68/EEC.
●
When the ON/STAND-BY button is set at STAND-BY
position mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position and the clock is displayed, the unit may be
brought into operation by the timer mode or remote
control.
position mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position and the clock is displayed, the unit may be
brought into operation by the timer mode or remote
control.
Ensure that neither the brown nor the blue wire is con-
nected to the earth terminal in your three pin plug.
nected to the earth terminal in your three pin plug.
Before replacing the plug cover, make sure that:
●
If the new fitted plug contains a fuse, its value is
the same as that removed from the cut-off plug.
the same as that removed from the cut-off plug.
●
The cord grip is clamped over the sheath of the
mains lead and not simply over the lead wires.
mains lead and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
ELECTRICIAN.
SERVICE INFORMATION
In the unlikely event of your equipment requiring repair,
please contact the dealer or supplier from whom it was
purchased. Where this is not possible, please contact
the telephone number listed below. You will then be
given details of how to obtain service.
In the unlikely event of your equipment requiring repair,
please contact the dealer or supplier from whom it was
purchased. Where this is not possible, please contact
the telephone number listed below. You will then be
given details of how to obtain service.
- 0345-125387 -
Please note; all calls will be charged at local rate.
Certain replacement parts and accessories may be ob-
tained from our main parts distributor.
tained from our main parts distributor.
WILLOW VALE ELECTRONICS LTD.
MANCHESTER
0161-682-1415
READING
01189-876444
In the unlikely event of this equipment requiring repair
during the guarantee period, you will need to provide
proof of the date of purchase to the repairing company.
Please keep your invoice or receipt, which is supplied
at the time of purchase.
during the guarantee period, you will need to provide
proof of the date of purchase to the repairing company.
Please keep your invoice or receipt, which is supplied
at the time of purchase.
Warning:
This unit contains no user serviceable parts. Never re-
move covers unless qualified to do so. This unit contains
dangerous voltages, always remove mains plug from the
socket before any service operation and when not in use
for a long period.
This unit contains no user serviceable parts. Never re-
move covers unless qualified to do so. This unit contains
dangerous voltages, always remove mains plug from the
socket before any service operation and when not in use
for a long period.
CAUTION
Use of controls, adjustments or performance of proce-
dures other than those specified herein may result in
hazardous radiation exposure.
Use of controls, adjustments or performance of proce-
dures other than those specified herein may result in
hazardous radiation exposure.
As the laser beam used in this compact disc player is
harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personnel only.
harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personnel only.
XL-560E\XL-570E(SUK) TINSE0019SJZZ
1
INTRODUCTION
Thank you for purchasing this SHARP product.
To obtain the best performance from this product
please read this manual carefully.
It will guide you in operating your SHARP prod-
uct.
To obtain the best performance from this product
please read this manual carefully.
It will guide you in operating your SHARP prod-
uct.
ACCESSORIES
Note:
Parts and equipment mentioned in this operation
manual other than those detailed above are not
included.
Parts and equipment mentioned in this operation
manual other than those detailed above are not
included.
PRECAUTIONS
■
General
●
Please ensure that the equipment is positioned in
a well ventilated area and ensure that there is at
least 10 cm (4") of free space along the sides, top
and back of the equipment.
a well ventilated area and ensure that there is at
least 10 cm (4") of free space along the sides, top
and back of the equipment.
●
Do not use oil, solvents, petrol, paint thinners or
insecticides on the unit.
insecticides on the unit.
●
Do not expose the unit to moisture, to tempera-
tures higher than 60˚C (140˚F) or to extreme low
temperatures.
tures higher than 60˚C (140˚F) or to extreme low
temperatures.
●
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and elec-
tronic/electrical equipment (home computers, fac-
similes, etc.) which generates electrical noise.
magnetic fields, excessive dust, humidity and elec-
tronic/electrical equipment (home computers, fac-
similes, etc.) which generates electrical noise.
●
Hold the AC power plug by the head when remov-
ing it from the AC socket, as pulling the lead can
damage internal wires.
ing it from the AC socket, as pulling the lead can
damage internal wires.
●
When cleaning the heads, pinch roller, etc, re-
move the AC power plug from the wall socket as
the unit contains high voltages.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
move the AC power plug from the wall socket as
the unit contains high voltages.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
●
Use the unit on a firm, level surface free from vi-
bration, and do not place anything on the top of
the unit.
bration, and do not place anything on the top of
the unit.
●
If an electrical storm is taking place near you, it
is suggested that you disconnect the AC power
lead from the AC socket for safety.
is suggested that you disconnect the AC power
lead from the AC socket for safety.
Warning:
The voltage used must be the same as that specified
on this unit. Using this product with a higher voltage
than that which is specified is dangerous and may
result in a fire or other type of accident causing dam-
age. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
The voltage used must be the same as that specified
on this unit. Using this product with a higher voltage
than that which is specified is dangerous and may
result in a fire or other type of accident causing dam-
age. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
■
Volume control
The sound level at a given volume setting depends
on a combination of speaker efficiency, location and
various other factors.
It is advisable to avoid exposure to high volume lev-
els, which occur whilst turning the unit on with the
volume control setting up high, or whilst continually
listening at high volumes.
on a combination of speaker efficiency, location and
various other factors.
It is advisable to avoid exposure to high volume lev-
els, which occur whilst turning the unit on with the
volume control setting up high, or whilst continually
listening at high volumes.
■
Condensation
Sudden temperature changes, storage or operation
in an extremely humid environment may cause con-
densation inside the cabinet (CD pickup, tape heads,
etc.) or on the transmitter LED on the remote control.
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or
cassette) in the unit until normal playback is possible
(about 1 hour). Wipe off any condensation on the
transmitter LED with a soft cloth before operating the
unit.
Warning:
CD players use a laser pickup which can damage
the eyes if viewed directly. Do not look at the pickup,
and do not touch the pickup directly.
in an extremely humid environment may cause con-
densation inside the cabinet (CD pickup, tape heads,
etc.) or on the transmitter LED on the remote control.
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or
cassette) in the unit until normal playback is possible
(about 1 hour). Wipe off any condensation on the
transmitter LED with a soft cloth before operating the
unit.
Warning:
CD players use a laser pickup which can damage
the eyes if viewed directly. Do not look at the pickup,
and do not touch the pickup directly.
Remote control
×
1
AC power lead
×
1
AM loop aerial
×
1
Speaker wire
×
2
(Only supplied with
the XL-570E)
the XL-570E)
FM aerial
×
1
XL-560E\XL-570E(SUK) TINSE0019SJZZ
2
PREPARATION FOR USE
●
Unplug the AC power lead from the AC
socket before connecting or disconnecting
any component.
socket before connecting or disconnecting
any component.
Caution of XL-570E:
●
Before connecting the speakers to the
unit, connect the speaker wires to the
s p ea k e rs fi rst . Th en , c on ne c t the
speaker wire to the terminals on the unit.
unit, connect the speaker wires to the
s p ea k e rs fi rst . Th en , c on ne c t the
speaker wire to the terminals on the unit.
●
Connect the speakers to the main unit,
and then use the system. If any of the
speakers is not connected, the main unit
or the speakers may malfunction or may
be damaged.
and then use the system. If any of the
speakers is not connected, the main unit
or the speakers may malfunction or may
be damaged.
■
Speaker connection
Connect each speaker wire to the SPEAKER ter-
minals as shown.
Use speakers with an impedance of 4 ohms or
more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
minals as shown.
Use speakers with an impedance of 4 ohms or
more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
●
Connect the wire with the white line to the
minus (
minus (
−
) terminal and the plain wire to the
plus (+) terminal.
Notes:
●
Do not mix the right channel and left channel
wiring when connecting the speakers to the
unit.
wiring when connecting the speakers to the
unit.
●
Do not let the bare speaker wires touch each
other as this may damage the amplifier and/or
speakers.
other as this may damage the amplifier and/or
speakers.
●
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
placed in the bass reflex ducts.
Caution:
●
The speakers included with the unit should
only be used with the XL-570E or XL-560E.
Do not use them with other models. Do not
connect the XL-570E’s or XL-560E’s speaker
terminals to any speakers other than those in-
cluded with the unit.
only be used with the XL-570E or XL-560E.
Do not use them with other models. Do not
connect the XL-570E’s or XL-560E’s speaker
terminals to any speakers other than those in-
cluded with the unit.
●
Should the speakers included with this unit be-
come defective, they can be repaired by your
local service facility.
Please ensure that full model details are sup-
plied with the faulty speaker to your local ser-
vice facility.
come defective, they can be repaired by your
local service facility.
Please ensure that full model details are sup-
plied with the faulty speaker to your local ser-
vice facility.
RATED SPEAKER IMPEDANCE:
4 OHMS MIN.
SPEAKERS
LEFT
RIGHT
2
1
3
Right speaker
Left speaker
In the case of XL-560E
In the case of XL-570E
RATED SPEAKER IMPEDANCE:
4 OHMS MIN.
SPEAKERS
LEFT
RIGHT
2
1
3
Right speaker
Left speaker
White
line
line
Black
XL-560E\XL-570E(SUK) TINSE0019SJZZ
3
