Sharp XL-35 User Manual / Operation Manual ▷ View online
02/9/11
XL35H_H_E2.fm
E-10
ENGLISH
XL-35H
8
7
6
5
4
3
2
1
C
D
P
lay
b
a
ck
Listening to a CD
This system can play audio CD-R and CD-RW discs just like CD
discs, but cannot perform recording.
Playback of audio CD-R or CD-RW may not be performed depend-
ing on the disc state or the device you used for recording.
discs, but cannot perform recording.
Playback of audio CD-R or CD-RW may not be performed depend-
ing on the disc state or the device you used for recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD STOP" appears on
the display.
the display.
When operating with the remote control, press the CD button.
3
Press the CD EJECT button to open the CD compart-
ment.
ment.
4
Place a CD on the spindle, la-
bel side up.
bel side up.
5
Close the CD compartment by firmly pushing the corner
marked "PUSH CLOSE".
marked "PUSH CLOSE".
Total number
of tracks
of tracks
Total playing
time
time
6
Press the
( ) button to start playback from track 1.
When the last track on the disc has finished playing, the CD
player will stop automatically.
player will stop automatically.
02/9/11
XL35H_H_E2.fm
E-11
ENGLISH
XL-35H
C
D
P
lay
b
a
ck
Listening to a CD (continued)
To interrupt playback:
Main unit operation:
Main unit operation:
Press the
button.
To resume playback from the same point, press the
button again.
Remote control operation:
Press the button.
To resume playback from the same point, press the button.
To resume playback from the same point, press the button.
To stop playback:
Press the button.
To remove the CD:
Whilst in the stop mode, press the CD EJECT button.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
!
If a disc is damaged, dirty, or loaded upside down, "NO DISC" or
"READ ERR" will appear on the display.
"READ ERR" will appear on the display.
!
Keep foreign objects out of the CD compartment.
!
Subjecting the unit to shock or vibration may cause mistracking.
!
When the unit is not being used, be sure to close the CD compart-
ment. If it is left open, the lens may be covered with dust and the unit
may not operate properly.
ment. If it is left open, the lens may be covered with dust and the unit
may not operate properly.
!
If TV or radio interference occurs during CD operation, move the unit
away from the TV or radio.
away from the TV or radio.
"
Headphones
"
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
!
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
side from which signals are read. Do not mark this surface.
!
Keep your discs away from direct sunlight, heat, and excessive
moisture.
moisture.
!
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
"
To locate the beginning of a track
!
Before plugging in or unplugging the head-
phones, reduce the volume.
phones, reduce the volume.
!
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended imped-
ance is 32 ohms.
diameter plug and are between 16 ohms and 50
ohms impedance. The recommended imped-
ance is 32 ohms.
!
Plugging in the headphones disconnects the
speakers automatically. Adjust the volume using
the VOLUME control.
speakers automatically. Adjust the volume using
the VOLUME control.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
!
You can skip to any track by pressing the
button repeatedly until the desired track
number appears.
number appears.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
!
You can skip to any track by pressing the
button repeatedly until the desired track
number appears.
number appears.
NO
YES
Correct
Correct
02/9/11
XL35H_H_E2.fm
E-12
ENGLISH
XL-35H
8
7
6
5
4
3
2
1
CD Pla
ybac
k
„
To locate the desired portion
Notes:
z
Normal playback will resume when the
(
) or
(
) but-
ton is released.
z
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, playback will start when you release the
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, playback will start when you release the
button.
„
Repeat play
All tracks or a programmed sequence can be continuously repeated.
To cancel repeat play:
Press the REPEAT button again.
" " will go out.
Press the REPEAT button again.
" " will go out.
Caution:
After performing repeat play, be sure to press the button. Other-
wise, the disc will play continuously.
After performing repeat play, be sure to press the button. Other-
wise, the disc will play continuously.
„
Random play
The tracks can be played in random order automatically.
To cancel random play:
Press the RANDOM button again.
"RANDOM" will go out.
Press the RANDOM button again.
"RANDOM" will go out.
Notes:
z
The random play will stop automatically when all tracks are
played once. (The same track will not be played back twice.)
played once. (The same track will not be played back twice.)
z
In random play, the CD player will select and play tracks automat-
ically. (You cannot select the order of the tracks.)
ically. (You cannot select the order of the tracks.)
z
If you press the
button during random play, you can move to
the track selected next by the random operation. On the other
hand, the
hand, the
button does not allow you to move to the previous
track. The beginning of the track being played will be located.
For audible fast forward:
Press and hold down the
button on the main unit or the
but-
ton on the remote control during playback.
For audible fast reverse:
Press and hold down the
button on the main unit or the
but-
ton on the remote control during playback.
To repeat all tracks:
Press the REPEAT button.
To repeat a desired track:
Perform steps 1 - 4 in the "Pro-
grammed play" section on page 13
and then press the REPEAT button.
grammed play" section on page 13
and then press the REPEAT button.
Press the RANDOM button to be-
gin random play.
gin random play.
02/9/11
XL35H_H_E2.fm
E-13
ENGLISH
XL-35H
C
D
P
lay
b
a
ck
Programmed play
You can choose up to 20 selections for playback in the order you
like.
like.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR button. The "MEMORY" indicator will disappear and all the
programmed contents will be cleared.
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR button. The "MEMORY" indicator will disappear and all the
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
!
Opening the CD compartment automatically cancels the pro-
grammed sequence.
grammed sequence.
!
Even if you press the ON/STAND-BY button to enter the stand-by
mode or the function is changed from CD to some other function,
the programmed selections will not be cleared.
mode or the function is changed from CD to some other function,
the programmed selections will not be cleared.
!
During programme operation, random play is not possible.
1
Whilst in the stop mode, press the MEMORY (MEMORY/
SET) button to enter the programming save mode.
SET) button to enter the programming save mode.
2
Within 30 seconds, press the
or
button to select the
desired track.
Selected track number
Playback time
3
Press the MEMORY (MEMORY/SET) button to save the
track number.
track number.
Playback order
Total playback time
4
Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be
programmed.
programmed.
5
Press the (
) button to start playback.
To clear the programmed selections:
Press the CLEAR button whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed.
Press the CLEAR button whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed.
Click on the first or last page to see other XL-35 service manuals if exist.