Sharp QT-CD180 User Manual / Operation Manual ▷ View online
5
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Listening to a CD
MIN
MAX
5
Press the PLAY/PAUSE
0 6
0 6
0 6
0 6
0 6
button to start playback from track 1.
6
Turn the VOLUME control to increase or decrease the volume.
7
Press the X-BASS button to emphasise the bass sound.
To interrupt playback:
Press the PLAY/PAUSE
0 6
button during playback.
Press the PLAY/PAUSE
0 6
button again to resume playback.
To stop playback:
Press the STOP
■
button.
To listen to the track being played again:
During playback, press the REVIEW/DOWN
5
button.
To move to the beginning of the next track:
During playback, press the CUE/UP
4
button.
Notes:
●
To skip a number of tracks at one time, press the REVIEW/DOWN
5
or CUE/UP
4
button repeatedly until the desired track number
is shown.
●
To start playing a desired track, press the REVIEW/DOWN
5
or
CUE/UP
4
button whilst in the stop mode to select the track num-
ber, and then press the PLAY/PAUSE
06
button.
1
Set the FUNCTION switch to CD.
2
Open the CD compartment.
3
Place a compact disc on the spindle, label side up.
8 cm (3") discs may be played without an adaptor.
8 cm (3") discs may be played without an adaptor.
4
Close the CD compartment.
Precautions:
●
When “Cd” or track number is displayed, the power is connected.
If you will not be using the CD player, set the FUNCTION switch to STAND-BY.
If you will not be using the CD player, set the FUNCTION switch to STAND-BY.
●
Do not open the CD compartment whilst the disc is rotating.
●
If the disc damaged, dirty, or loaded upside down, the total number of
tracks will not appear.
Clean, replace, or reload the disc properly.
tracks will not appear.
Clean, replace, or reload the disc properly.
●
Keep foreign objects out of the CD compartment.
●
Subjecting the unit to shock or vibration may cause mistracking.
●
Keep the CD compartment closed except when loading discs.
●
Playing certain compact discs at a high volume may cause mistracking.
In this case, listen at a lower volume.
In this case, listen at a lower volume.
●
If TV or radio interference occurs during CD operation, move the unit
away from the TV or radio.
away from the TV or radio.
6
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
To fast forward audibly (Cue):
During playback, hold down the CUE/UP
4
button.
To fast reverse audibly (Review):
During playback, hold down the REVIEW/DOWN
5
button.
Notes:
●
When the end of the disc is reached whilst cueing, “En” will appear in
the display and CD operation is paused. Press the REVIEW/DOWN
the display and CD operation is paused. Press the REVIEW/DOWN
5
button for fast reverse or press the STOP
■
button to stop CD
operation.
●
If the beginning of the disc is reached whilst reviewing, the mode will
automatically switch to normal playback at that point.
automatically switch to normal playback at that point.
■
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking can
occur due to an accumulation of dirt on the disc surface.
Follow the guidelines below for maximum enjoyment from your CD col-
lection and player.
occur due to an accumulation of dirt on the disc surface.
Follow the guidelines below for maximum enjoyment from your CD col-
lection and player.
●
Do not write on either side of the disc, particularly the non-label side.
Signals are read from the non-label side. Do not mark this surface.
Signals are read from the non-label side. Do not mark this surface.
●
Keep your discs away from direct sunlight, heat, and excessive mois-
ture.
ture.
●
Always hold the CDs by the edges. Fingerprints, dirt, or water on the
CDs can cause noise or mistracking. If a CD is dirty or does not play
properly, clean it with a soft, dry cloth, wiping straight out from the
centre, along the radius.
CDs can cause noise or mistracking. If a CD is dirty or does not play
properly, clean it with a soft, dry cloth, wiping straight out from the
centre, along the radius.
1
Set the FUNCTION switch to FM or AM.
2
Turn the TUNING control to tune in to the desired station.
During FM stereo reception, it automatically switches to monaural
when the signal is weak.
when the signal is weak.
Aerial adjustment:
After use:
Set the FUNCTION switch to STAND-BY.
Set the FUNCTION switch to STAND-BY.
Listening to the Radio
FM
AM
Listening to a CD (Continued)
7
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
1
Set the FUNCTION switch to TAPE.
2
Open the cassette door by pushing the STOP/EJECT
■
7
7
7
7
7
button.
3
Load a cassette into the cassette compartment with the side to
be played facing toward you.
be played facing toward you.
4
Press the PLAY
1
1
1
1
1
button.
5
To advance the tape, press the STOP/EJECT
■
7
7
7
7
7
button, then
press the F FWD
3
3
3
3
3
button. To rewind, press the STOP/EJECT
■
7
7
7
7
7
button, then press the REWIND
2
button.
Listening to a Cassette Tape
Tab for side B (2) Tab for side A (1)
Side A (1)
To interrupt playback:
Press the PAUSE
6
6
6
6
6
button during playback.
Press the PAUSE
6
6
6
6
6
button again to resume playback.
To stop playback:
Press the STOP/EJECT
■
7
button.
Precautions:
●
Be sure not to press the PLAY
1
1
1
1
1
and REWIND
2
buttons simulta-
neously, or the tape will become damaged.
●
Before changing from one tape operation to another, press the STOP/
EJECT
EJECT
■
7
7
7
7
7
button.
●
Do not press the PAUSE
6
button whilst the fast forward or rewind
operations are in progress. The F FWD
3
or REWIND
2
button
will not be released when the tape end is reached. Once this occurs,
press the STOP/EJECT
press the STOP/EJECT
■
7
button.
■
Cassette tape
●
For playback, use normal or low-noise tape for the best sound. (Metal
or CrO
or CrO
2
tape is not recommended.) For recording, use only normal
tape.
●
Do not use C-120 tapes, or poor-quality tapes, as they may cause
malfunctions.
malfunctions.
●
Before loading a tape into the cassette compartment, tighten the slack
with a pen or pencil.
with a pen or pencil.
●
Cassettes have removable tabs which prevent accidental recording
or erasing from taking place. Removing the tab will protect the corre-
sponding side from being erased. Cover the tab holes with adhesive
tape to erase or record again.
or erasing from taking place. Removing the tab will protect the corre-
sponding side from being erased. Cover the tab holes with adhesive
tape to erase or record again.
8
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Recording to a Cassette Tape
Before recording:
●
When recording important selections, make a preliminary test to en-
sure that the desired material is properly recorded.
sure that the desired material is properly recorded.
●
SHARP is not liable for damage or loss of your recording arising from
malfunction of this unit.
malfunction of this unit.
●
The ALC (Automatic Record Level Control) circuit automatically con-
trols the level of the input signal used for recording.
trols the level of the input signal used for recording.
●
The VOLUME and X-BASS controls may be adjusted with no effect
on the recorded signal. (Variable Sound Monitor)
on the recorded signal. (Variable Sound Monitor)
●
Metal and CrO
2
tapes cannot be used for recording.
■
Recording from a CD
1
Set the FUNCTION switch to CD.
2
Load the disc to be recorded.
3
Load a blank cassette into the cassette compartment with the
side to be recorded on facing toward you.
side to be recorded on facing toward you.
4
Press the RECORD
●
button.
5
Press the PLAY/PAUSE
0 6
0 6
0 6
0 6
0 6
button on the CD.
To stop recording:
Press the STOP/EJECT
■
7
button.
If the STOP
■
or PLAY/PAUSE
0 6
button is pressed whilst recording,
or if the CD comes to its end, the tape deck will not stop.
To record a specific track:
Press the REVIEW/DOWN
5
or CUE/UP
4
button until the desired
track number is displayed, then start recording.
■
Recording from the radio
1
Set the FUNCTION switch to FM or AM.
2
Tune in to the station to be recorded.
3
Load a blank cassette into the cassette compartment with the
side to be recorded on facing toward you.
side to be recorded on facing toward you.
4
Press the PAUSE
6
6
6
6
6
button.
5
Press the RECORD
●
button.
6
Press the PAUSE
6
6
6
6
6
button again.
To stop recording:
Press the STOP/EJECT
■
7
button.
Click on the first or last page to see other QT-CD180 service manuals if exist.