Sharp QT-CD161H (serv.man2) User Manual / Operation Manual ▷ View online
QT-CD141H/161H/162H
– 2 –
SAFETY PRECATION FOR
SERVICE MANUAL
Precaution to be taken when replacing and servicing the
Laser Pickup.
Laser Pickup.
The ael (ACCESSIBLE EMMISSION LEVEL) of the laser
power output is less than class 1 but the laser component is
capable of emitting radiation exceeding the limit for class 1.
Therefore it is important that the following precautions are
observer during servicing to protect your eyes against exposure
to the laser beam.
power output is less than class 1 but the laser component is
capable of emitting radiation exceeding the limit for class 1.
Therefore it is important that the following precautions are
observer during servicing to protect your eyes against exposure
to the laser beam.
(1) When the cabinet is removed, the power is turned on
without a compact disc in position and the pick-up is on the
outer edge the laser will light for several seconds to detect
a disc. Do not look into the pick-up lens.
outer edge the laser will light for several seconds to detect
a disc. Do not look into the pick-up lens.
(2) The laser power output of the pick-up unit and replacement
service parts are all factory pre-set before shipment.
Do not attempt to re-adjust the laser pick-up unit during
replacement or servicing.
replacement or servicing.
(3) Under no circumstances stare into the pick-up lens at any
time.
(4) CAUTION-USE of controls or adjustments, or pereformance
of procedures other than those specified herein may result
in hazardous radiation exposure.
in hazardous radiation exposure.
(161H For U.K.)
(161H Except for U.K./141H/162H)
Laser Diode Properties
Material:
GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
Emission Duration: continuous
Laser Output: max. 0.6 mW
LASER KLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO
BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
VARNING-OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD. STIRRA
EJ IN I STRALEN OCH BETRAKTA EJ STRALEN MED OPTISKA INSTRUMENT.
EJ IN I STRALEN OCH BETRAKTA EJ STRALEN MED OPTISKA INSTRUMENT.
ADVERSEL-USYNLIG LASERSTRALING VED ABNING. SE IKKE IND I
STRALEN-HELLER IKKE MED OPTISKE INSTRUMENTER.
STRALEN-HELLER IKKE MED OPTISKE INSTRUMENTER.
VARO! AVATTAESSA OLET ALTTIINA NAKYMATON LASERSATEILYLLE.
ALA TUIJOTA SATEESEEN ALAKA KATSO SITA OPTISEN LAITTEEN LAPI.
ALA TUIJOTA SATEESEEN ALAKA KATSO SITA OPTISEN LAITTEEN LAPI.
VARNING-OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD.
STIRRA EJ IN I STRALEN OCH BETRAKTA EJ STRALEN GENOM OPTISKT
INSTRUMENT.
ADVERSEL-USYNLIG LASERSTRALING NAR DEKSEL APNES. STIRR IKKE
INN I STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER.
STIRRA EJ IN I STRALEN OCH BETRAKTA EJ STRALEN GENOM OPTISKT
INSTRUMENT.
ADVERSEL-USYNLIG LASERSTRALING NAR DEKSEL APNES. STIRR IKKE
INN I STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER.
VAROITUS! LAITTEEN KéYTTéMINEN
MUULLA KUIN TéSSé
KéYTTôOHJEESSA MAINITULLA
TAVALLA SAATTAA ALTISTAA
KéYTTéJéN TURVALLISUUSLUOKAN 1
YLITTéVéLLE NéKYMéTTôMéLLE
LASERSéTEILYLLE.
MUULLA KUIN TéSSé
KéYTTôOHJEESSA MAINITULLA
TAVALLA SAATTAA ALTISTAA
KéYTTéJéN TURVALLISUUSLUOKAN 1
YLITTéVéLLE NéKYMéTTôMéLLE
LASERSéTEILYLLE.
VARNING - OM APPARATEN ANVéNDS
Pè ANNAT SéTT éN I DENNA
BRUKSANVISNING SPECIFICERAS. KAN
ANVéNDAREN UTSéTTAS FôR OSYNLIG
LASERSTRèLNING, SOM ôVERSKRIDER
Pè ANNAT SéTT éN I DENNA
BRUKSANVISNING SPECIFICERAS. KAN
ANVéNDAREN UTSéTTAS FôR OSYNLIG
LASERSTRèLNING, SOM ôVERSKRIDER
QT-CD141H/161H/162H
– 3 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
TO THE OPERATION MANUAL.
SPECIFICATIONS
General
Power source:
AC 230 - 240V, 50 Hz
DC 12 V [ "D" size (UM/SUM-1,
R20 or HP-2) battery x 8]
DC 3 V ["AA" size (UM/SUM-3, R6
or HP-7) battery x 2 for tuner
memory]
DC 12 V [ "D" size (UM/SUM-1,
R20 or HP-2) battery x 8]
DC 3 V ["AA" size (UM/SUM-3, R6
or HP-7) battery x 2 for tuner
memory]
Power consumption:
11 W
Output power:
PMPO; 28 W (total)
(161H Except forU.K.
MPO; 8.4 W (4.2 W + 4.2 W)
/141H/162H)
(AC operation, DIN 45 324)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, DIN 45 324)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, DIN 45 324)
Output power:
MPO; 8.4 W (4.2 W + 4.2 W)
(161H For U.K.)
(AC operation 10% T.H.D.)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
RMS; 4.6 W (2.3 W + 2.3 W)
(DC operation, 10 % T.H.D.)
Speakers:
10 cm (4") full-range speaker x 2
Output terminal:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 480 mm (18-15/16")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Height; 153 mm (6-1/16")
Depth; 254 mm (10")
Weight:
3.2 kg (7.1 Ibs.) without batteries
Radio
Frequency range:
FM; 87.5 - 108 MHz
AM; 526.5 - 1,606.5 kHz
AM; 526.5 - 1,606.5 kHz
Tape recorder
Frequency response:
50 - 14,000 Hz (Normal tape)
Signal/noise ratio:
50 dB
Wow and flitter:
0.3 % (DIN 45 511)
(161H Except for U.K./Australia/New Zealand/141H/162H)
Wow and flitter:
Wow and flitter:
0.25 % (WRMS)
(161H For U.K./Australia/New Zealand)
Motor:
Motor:
DC 12 V electric governor
Bias system:
AC bias
Erase system:
Magnet erase
Compact disc player
Disc:
Compact disc
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
Audio channels:
2
Quantization:
16-bit linear quantization
Filter:
4-tims oversampling digital filter
D/A converter:
1-bit D/A converter
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
Specifications for this model are subject to change without
prior notice.
prior notice.
IMPORTANT SERVICE NOTES (161H FOR U.K. ONLY)
Before returning the unit to the customer after completion of a repair or adjustment it is necessary for the following withstand voltage
test to be applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
test to be applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
NG: The “NG” lamp lights and the buzzor sounds.
OK: The “GOOD” lamp lights.
Judgment
Unit
Set current (Cutoff current)
Set time
Set name
Withstanding Voltage Tester
Test voltage
Set value
4,240 VPEAK
3,000 VRMS
3,000 VRMS
6 secs
4 mA
PROBE
AC
OUT
UNIT
SHORT-CIRCUT
AC POWER
SUPPLY CORD
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO GND OF BATTERY
SPRING
TO GND OF BATTERY
SPRING
WITHSTANDING
VOLTAGE TESTER
QT-CD141H/161H/162H
– 4 –
NAMES OF PARTS
1. (TAPE) Record Button
2. (TAPE) Play Button
3. (TAPE) Rewind Button
4. (TAPE) Fast Forward Button
5. (TAPE) Stop/Eject Button
6. (TAPE) Pause Button
7. Cassette Compartment
8. CD Compartment
9. CD Eject Button
2. (TAPE) Play Button
3. (TAPE) Rewind Button
4. (TAPE) Fast Forward Button
5. (TAPE) Stop/Eject Button
6. (TAPE) Pause Button
7. Cassette Compartment
8. CD Compartment
9. CD Eject Button
10. (CD) Pause Button
(TUNER) Band Selector Button
11. Preset Memory Button
12. (CD) Stop Button
12. (CD) Stop Button
(TUNER) Tuning Down Button
13. (CD) Play/Repeat Button
(TUNER) Tuning Up Button
14. (CD) Track Up/Cue Button
(TUNER) Preset Up Button
15. (CD) Track Down/Review Button
(TUNER) Preset Down Button
16. Stand-by, On/Function Switch
17. Extra Bass Switch
18. Surround Switch (162H ONLY)
19. Volume Control
20. (CD) Play Indicator
21. (CD) Repeat Indicator
22. (CD) Pause Indicator
23. Memory Indicator
24. (TUNER) FM Stereo MOde Indicator
25. (TUNER) FM Stereo Indicator
26. Battery Compartment
27. FM Telescopic Rod Aerial
28. Headphone Socket
29. AC Power Input Socket
17. Extra Bass Switch
18. Surround Switch (162H ONLY)
19. Volume Control
20. (CD) Play Indicator
21. (CD) Repeat Indicator
22. (CD) Pause Indicator
23. Memory Indicator
24. (TUNER) FM Stereo MOde Indicator
25. (TUNER) FM Stereo Indicator
26. Battery Compartment
27. FM Telescopic Rod Aerial
28. Headphone Socket
29. AC Power Input Socket
Remote control (161H/162H ONLY)
30. (CD) Track Down/Review Button
(TUNER) Preset Down Button
31. (CD) Pause Button
(TUNER) Band Selector Button
32. (CD) Play/Repeat Button
(TUNER) Tuning Up Button
33. (CD) Track Up/Cue Button
(TUNER) Preset Up Button
34. (CD) Stop Button
(TUNER) Tuning Down Button
REMOTE CONTROL (161H/162H ONLY)
20 21 22 23 24 25
1 2 3 4 5
6 7 8 9
10
11
16
18 19
13
14
15
12
17
26
27
28 29
Illustration: QT-CD162H
30
31
32
33
34
15
15
Remote Sensor
0.2 m - 6 m
(8" - 20')
(8" - 20')
Notes:
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
Periodically clean the transmitter LED on the
remote control and the sensor on the main unit
with a soft cloth.
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
reduced or if the operation becomes erratic.
Periodically clean the transmitter LED on the
remote control and the sensor on the main unit
with a soft cloth.
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
Illustration: QT-CD162H
QT-CD141H/161H/162H
– 5 –
1
Rear Cabinet
1. Screw ................. (A1) x10
5-1
2. Socket .................. (A2) x1
5-2
2
Top Cabinet
1. Knob ..................... (B1) x1
5-2
(with CD Mechanism/ 2. Screw ................... (B2) x3
Tape Mechanism/
Tape Mechanism/
3. Socket .................. (B3) x1
Main PWB)
3
Main PWB/
1. Screw ................... (C1) x9
5-3,6-1
Switch PWB/
2. Socket .................. (C2) x4
5-3,6-1
Headphones PWB 3. Soldering .............. (C3) x3
5-3
4
Surround PWB
1. Screw ................... (D1) x2
5-3
(162H Only)
5
Tape Mechanism
1. Screw ................... (E1) x4
6-1
6
CD Mechanism
1. Screw ................... (F1) x3
6-1
7
Terminal PWB
1. Screw ................... (G1) x5
6-2
2. Hook ..................... (G2) x1
8
Battery PWB
1. Hook ..................... (H1) x2
6-3
DISASSEMBLY
Caution on Disassembly
Follow the below-mentioned notes when disassembling the
unit and reassembling it, to keep it safe and ensure excellent
performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
Follow the below-mentioned notes when disassembling the
unit and reassembling it, to keep it safe and ensure excellent
performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
STEP
REMOVAL
PROCEDURE
FIGURE
Figure 5-3
Figure 5-1
Figure 5-2
Headphones
PWB
PWB
(C1)x6
ø3x10mm
ø3x10mm
(C1)x2
ø3x10mm
ø3x10mm
Main PWB
Top Cabinet
(C2)x1
(C3)x3
(C2)x2
Switch
PWB
PWB
(D1)x2
ø3x10mm
ø3x10mm
SURROUND
PWB
PWB
162H ONLY
(A1)x3
ø3x12mm
ø3x12mm
(A1)x1
ø3x12mm
ø3x12mm
(A1)x6
ø3x20mm
ø3x20mm
Rear Cabinet
Front Cabinet
(B2)x2
ø3x10mm
ø3x10mm
(A2)x1
(B3)x1
Front Cabinet
Top Cabinet
(B1)x1
Main PWB
(B2)x1
ø3x10mm