Sharp QT-120H User Manual / Operation Manual ▷ View online
YO
<P=001>
RECORDING
●
When recording important selections, be sure to make a
preliminary test to ensure that the desired material is being
properly recorded.
preliminary test to ensure that the desired material is being
properly recorded.
●
The ALC (Automatic Record Level Control) circuit auto-
matically controls the level of the input signal used for
recording.
matically controls the level of the input signal used for
recording.
●
The VOLUME, X-BASS and GRAPHIC EQUALIZER con-
trols may be adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
trols may be adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
●
Metal and CrO
2
tapes cannot be used for recording.
■
Recording from the built-in radio
1
Tune in to the desired station. (See page 4.)
2
Load a cassette into the cassette compartment.
3
Press the PAUSE button.
4
Press the RECORD button, which also engages the
PLAY button.
PLAY button.
5
Press the PAUSE button again to begin recording.
Beat cancel switch:
If a whistling noise occurs when recording from an MW or
LW station, set the BEAT CANCEL switch to A, B or C,
whichever gives the best reception.
LW station, set the BEAT CANCEL switch to A, B or C,
whichever gives the best reception.
■
Recording from the built-in microphone
1
Set the TAPE/RADIO switch to TAPE.
2
Load a cassette into the cassette compartment.
3
Press the PAUSE button.
4
Press the RECORD button, which also engages the
PLAY button.
PLAY button.
5
Press the PAUSE button again to begin recording.
Notes:
●
Monitoring of the recording is not possible.
●
Recording from the built-in microphone is not in stereo.
A
BEAT
CANCEL
B
C
TUNING
1
2
4
3,5
HEADPHONES
PHONES
●
Be sure that your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50 ohms
impedance. The recommended impedance is 32 ohms.
diameter plug and are between 16 ohms and 50 ohms
impedance. The recommended impedance is 32 ohms.
●
Connect the headphones plug to the PHONES socket. The
speakers will be automatically disconnected. Adjust the
volume by using the VOLUME control.
speakers will be automatically disconnected. Adjust the
volume by using the VOLUME control.
QT-120H(SUK) ?????????????
6
<P=002>
MAINTENANCE
■
Internal care
●
Dirty heads, capstan or pinch roller can cause poor sound
and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
●
■
External care
●
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or other
chemicals.
chemicals.
SPECIFICATIONS
●
General
Power source:
AC 230 V, 50 Hz
DC 12 V
DC 12 V
[
"D" size (UM/SUM-1,
R20 or HP-2) battery
×
8
]
Power consumption:
30 W
Output power:
●
For U.K. customers
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
●
For Turkish customers
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
(DC operation, 1 kHz, 10 % T.H.D.)
●
For customers in other
countries
PMPO; 60 W (total)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
PMPO; 60 W (total)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
Speakers:
12 cm (4-3/4") free-edge speaker
×
2
Tweeter
Tweeter
×
2
Output terminal:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 515 mm (20-5/16")
Height; 173 mm (6-13/16")
Depth; 203 mm (8")
Height; 173 mm (6-13/16")
Depth; 203 mm (8")
Weight:
●
Radio section
Frequency range:
FM; 87.5 - 108 MHz
MW; 526.5 - 1,606.5 kHz
LW; 150 - 285 kHz
MW; 526.5 - 1,606.5 kHz
LW; 150 - 285 kHz
●
Tape recorder section
Frequency response:
60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
40 dB
Wow and flutter:
0.15 % (WRMS)
Motor:
DC 12 V electric governor
AC bias
Magnet erase
SHARP CORPORATION
A9706.NS.HK
QT-120H(SUK) ?????????????
<P=002>
MAINTENANCE
■
Internal care
●
Dirty heads, capstan or pinch roller can cause poor sound
and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
●
■
External care
●
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or other
chemicals.
chemicals.
SPECIFICATIONS
●
General
Power source:
AC 230 V, 50 Hz
DC 12 V
DC 12 V
[
"D" size (UM/SUM-1,
R20 or HP-2) battery
×
8
]
Power consumption:
30 W
Output power:
●
For U.K. customers
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
●
For Turkish customers
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
(DC operation, 1 kHz, 10 % T.H.D.)
●
For customers in other
countries
PMPO; 60 W (total)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
PMPO; 60 W (total)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
Speakers:
12 cm (4-3/4") free-edge speaker
×
2
Tweeter
Tweeter
×
2
Output terminal:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 515 mm (20-5/16")
Height; 173 mm (6-13/16")
Depth; 203 mm (8")
Height; 173 mm (6-13/16")
Depth; 203 mm (8")
Weight:
●
Radio section
Frequency range:
FM; 87.5 - 108 MHz
MW; 526.5 - 1,606.5 kHz
LW; 150 - 285 kHz
MW; 526.5 - 1,606.5 kHz
LW; 150 - 285 kHz
●
Tape recorder section
Frequency response:
60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
40 dB
Wow and flutter:
0.15 % (WRMS)
Motor:
DC 12 V electric governor
AC bias
Magnet erase
SHARP CORPORATION
A9706.NS.HK
QT-120H(SUK) ?????????????
<P=002>
MAINTENANCE
■
Internal care
●
Dirty heads, capstan or pinch roller can cause poor sound
and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
●
■
External care
●
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
soap solution, then wipe with a dry cloth.
●
Do not use chemically treated cleaning cloths or other
chemicals.
chemicals.
SPECIFICATIONS
●
General
Power source:
AC 230 V, 50 Hz
DC 12 V
DC 12 V
[
"D" size (UM/SUM-1,
R20 or HP-2) battery
×
8
]
Power consumption:
30 W
Output power:
●
For U.K. customers
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
●
For Turkish customers
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
(DC operation, 1 kHz, 10 % T.H.D.)
●
For customers in other
countries
PMPO; 60 W (total)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
PMPO; 60 W (total)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
Speakers:
12 cm (4-3/4") free-edge speaker
×
2
Tweeter
Tweeter
×
2
Output terminal:
Headphones; 16-50 ohms
(recommended; 32 ohms)
(recommended; 32 ohms)
Dimensions:
Width; 515 mm (20-5/16")
Height; 173 mm (6-13/16")
Depth; 203 mm (8")
Height; 173 mm (6-13/16")
Depth; 203 mm (8")
Weight:
●
Radio section
Frequency range:
FM; 87.5 - 108 MHz
MW; 526.5 - 1,606.5 kHz
LW; 150 - 285 kHz
MW; 526.5 - 1,606.5 kHz
LW; 150 - 285 kHz
●
Tape recorder section
Frequency response:
60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
40 dB
Wow and flutter:
0.15 % (WRMS)
Motor:
DC 12 V electric governor
AC bias
Magnet erase
SHARP CORPORATION
A9706.NS.HK
QT-120H(SUK) ?????????????
Display