DOWNLOAD Sharp QT-120H Service Manual ↓ Size: 167.31 KB | Pages: 8 in PDF or view online for FREE

Model
QT-120H
Pages
8
Size
167.31 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / Portable
File
qt-120h.pdf
Date

Sharp QT-120H User Manual / Operation Manual ▷ View online

<P=004>
CASSETTE OPERATION 
General information
For playback, use normal or low-noise tape for the best
sound. (Metal or CrO
2
 tape is not recommended.)
For recording, use only normal tape.
Do not use C-120 tapes, tapes with large diameter reels,
or poor-quality tapes, as they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or pencil.
Cassettes have removable tabs which prevent accidental
recording or erasing from taking place. Removing the tab
will protect the corresponding side from being erased.
Cover the tab holes with adhesive tape to erase or record
again.
Playback
1
Set the TAPE/RADIO switch to TAPE.
2
Press the STOP/EJECT button and load a cassette into
the cassette compartment.
3
Press the PLAY button.
4
To advance the tape, press the STOP/EJECT button,
then press the F FWD button. To rewind, press the
STOP/EJECT button, then press the REWIND button.
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT button.
Precautions:
Be sure not to press the PLAY and REWIND buttons sim-
ultaneously, or the tape will be damaged.
Before changing from one tape operation to another, press
the STOP/EJECT button.
When the end of the tape is reached during the recording,
playback, fast forward or rewind mode, the full auto stop
system is activated and automatically puts the unit into the
neutral (stop) mode.
If the PAUSE button is pressed whilst the fast forward or
rewind operation is in progress, the F FWD or REWIND
button will not be released when the tape end is reached.
In this case, press the STOP/EJECT button.
1
2
2
3
REWIND PAUSE
F FWD
TAPE
FM ST
FM MONO
RADIO
STAND-BY
ON
Side A (1)
Tab for side B (2)
Tab for side A (1)
QT-120H(SUK) ?????????????
5
YO
<P=001>
RECORDING 
When recording important selections, be sure to make a
preliminary test to ensure that the desired material is being
properly recorded.
The ALC (Automatic Record Level Control) circuit auto-
matically controls the level of the input signal used for
recording.
The VOLUME, X-BASS and GRAPHIC EQUALIZER con-
trols may be adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
Metal and CrO
2
 tapes cannot be used for recording.
Recording from the built-in radio
1
Tune in to the desired station. (See page 4.)
2
Load a cassette into the cassette compartment.
3
Press the PAUSE button.
4
Press the RECORD button, which also engages the
PLAY button.
5
Press the PAUSE button again to begin recording.
Beat cancel switch:
If a whistling noise occurs when recording from an MW or
LW station, set the BEAT CANCEL switch to A, B or C,
whichever gives the best reception.
Recording from the built-in microphone
1
Set the TAPE/RADIO switch to TAPE.
2
Load a cassette into the cassette compartment.
3
Press the PAUSE button.
4
Press the RECORD button, which also engages the
PLAY button.
5
Press the PAUSE button again to begin recording.
Notes:
Monitoring of the recording is not possible.
Recording from the built-in microphone is not in stereo.
A
BEAT
CANCEL
B
C
TUNING
1
2
4
3,5
HEADPHONES 
PHONES
Be sure that your headphones have a 3.5 mm (1/8")
diameter plug and are between 16 ohms and 50 ohms
impedance. The recommended impedance is 32 ohms.
Connect the headphones plug to the PHONES socket. The
speakers will be automatically disconnected. Adjust the
volume by using the VOLUME control.
QT-120H(SUK) ?????????????
6
<P=002>
MAINTENANCE 
Internal care
Dirty heads, capstan or pinch roller can cause poor sound
and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
External care
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
Do not use chemically treated cleaning cloths or other
chemicals.
SPECIFICATIONS
 General
Power source:
AC 230 V, 50 Hz
DC 12 V 
[
"D" size (UM/SUM-1,
R20 or HP-2) battery 
×
  8
]
Power consumption:
30 W
Output power:
 For U.K. customers
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
 For Turkish customers
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
 For customers in other
      countries
PMPO; 60 W (total)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
Speakers:
12 cm (4-3/4") free-edge speaker 
×
2
Tweeter 
×
  2
Output terminal:
Headphones; 16-50 ohms
(recommended; 32 ohms)
Dimensions:
Width; 515 mm (20-5/16")
Height; 173 mm (6-13/16")
Depth; 203 mm (8")
Weight:
 Radio section
Frequency range:
FM; 87.5 - 108 MHz
MW; 526.5 - 1,606.5 kHz
LW; 150 - 285 kHz
 Tape recorder section
Frequency response:
60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
40 dB
Wow and flutter:
0.15 % (WRMS)
Motor:
DC 12 V electric governor
AC bias
Magnet erase
SHARP CORPORATION
A9706.NS.HK
QT-120H(SUK) ?????????????
<P=002>
MAINTENANCE 
Internal care
Dirty heads, capstan or pinch roller can cause poor sound
and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
External care
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
Do not use chemically treated cleaning cloths or other
chemicals.
SPECIFICATIONS
 General
Power source:
AC 230 V, 50 Hz
DC 12 V 
[
"D" size (UM/SUM-1,
R20 or HP-2) battery 
×
  8
]
Power consumption:
30 W
Output power:
 For U.K. customers
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
 For Turkish customers
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
 For customers in other
      countries
PMPO; 60 W (total)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 1 kHz, 10 % T.H.D.)
Speakers:
12 cm (4-3/4") free-edge speaker 
×
2
Tweeter 
×
  2
Output terminal:
Headphones; 16-50 ohms
(recommended; 32 ohms)
Dimensions:
Width; 515 mm (20-5/16")
Height; 173 mm (6-13/16")
Depth; 203 mm (8")
Weight:
 Radio section
Frequency range:
FM; 87.5 - 108 MHz
MW; 526.5 - 1,606.5 kHz
LW; 150 - 285 kHz
 Tape recorder section
Frequency response:
60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
40 dB
Wow and flutter:
0.15 % (WRMS)
Motor:
DC 12 V electric governor
AC bias
Magnet erase
SHARP CORPORATION
A9706.NS.HK
QT-120H(SUK) ?????????????
Page of 8
Display

Sharp QT-120H User Manual / Operation Manual ▷ Download