Sharp QT-120H User Manual / Operation Manual ▷ View online
MODEL
QT-120H
OPERATION MANUAL
YO
<P=001>
STEREO RADIO CASSETTE RECORDER
QT-120H(SUK) ?????????????
Thank you for purchasing this SHARP product.
To obtain the best performance from this product please read this manual carefully.
It will guide you in operating your SHARP product.
To obtain the best performance from this product please read this manual carefully.
It will guide you in operating your SHARP product.
SPECIAL NOTES FOR UK CUSTOMERS ONLY
NOTE FOR USERS IN THE U.K.
SERVICE INFORMATION
In the unlikely event of your equipment requiring repair,
please contact the dealer or supplier from whom it was
purchased. Where this is not possible, please contact the
telephone number listed below. You will then be given
details of how to obtain service.
please contact the dealer or supplier from whom it was
purchased. Where this is not possible, please contact the
telephone number listed below. You will then be given
details of how to obtain service.
- 0345-125387 -
Please note; all calls will be charged at local rate.
Certain replacement parts and accessories may be ob-
tained from our main parts distributor.
Certain replacement parts and accessories may be ob-
tained from our main parts distributor.
WILLOW VALE ELECTRONICS LTD.
In the unlikely event of this equipment requiring repair
during the guarantee period, you will need to provide
proof of the date of purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at
the time of purchase.
during the guarantee period, you will need to provide
proof of the date of purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at
the time of purchase.
The mains lead of this product is fitted with a non-rewire-
able (moulded) plug incorporating a 3A fuse. Should the
fuse need to be replaced, a BSI or ASTA approved BS
1362 fuse marked or and of the same rating as
above, which is also indicated on the pin face of the plug
must be used.
able (moulded) plug incorporating a 3A fuse. Should the
fuse need to be replaced, a BSI or ASTA approved BS
1362 fuse marked or and of the same rating as
above, which is also indicated on the pin face of the plug
must be used.
Always refit the fuse cover after replacing the fuse. Never
use the plug without the fuse cover fitted.
use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home
not being compatible with the plug supplied, cut-off the
mains plug and fit an appropriate type.
not being compatible with the plug supplied, cut-off the
mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and
the cut-off plug destroyed immediately and disposed of
in a safe manner.
the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be in-
serted elsewhere into a 13A socket outlet as a serious
electric shock may occur.
serted elsewhere into a 13A socket outlet as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the
instructions below:
instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance
with the following code:
Blue : Neutral
Brown : Live
with the following code:
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this
product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
●
The wire which is coloured blue must be connected to
the plug terminal which is marked N or coloured black.
the plug terminal which is marked N or coloured black.
●
The wire which is coloured brown must be connected
to the plug terminal which is marked L or coloured red.
to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is con-
nected to the earth terminal in your three pin plug.
nected to the earth terminal in your three pin plug.
Before replacing the plug cover, make sure that:
●
If the new fitted plug contains a fuse, its value is the
same as that removed from the cut-off plug.
same as that removed from the cut-off plug.
●
The cord grip is clamped over the sheath of the mains
lead and not simply over the lead wires.
lead and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
ELECTRICIAN.
MANCHESTER 0161-682-1415
READING 01734-876444
READING 01734-876444
●
This equipment complies with the requirements of
Directives 89/336/EEC and 73/23/EEC as amended by
93/68/EEC.
Directives 89/336/EEC and 73/23/EEC as amended by
93/68/EEC.
QT-120H(SUK) ?????????????
1
YO
<P=001>
SPECIAL NOTES
●
When the STAND-BY/ON switch is set at STAND-BY po-
sition, mains voltage is still present inside the unit.
sition, mains voltage is still present inside the unit.
Warning:
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains danger-
ous voltages, always remove mains plug from the socket
before any service operation and when not in use for a long
period.
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains danger-
ous voltages, always remove mains plug from the socket
before any service operation and when not in use for a long
period.
Warning:
To prevent fire or shock hazard, do not expose this appliance
to dripping or splashing liquids.
To prevent fire or shock hazard, do not expose this appliance
to dripping or splashing liquids.
●
Recording and playback of any material may require con-
sent, which SHARP is unable to give. Please refer par-
ticularly to the provisions of the Copyright Act 1956, the
Dramatic and Musical Performers Protection Act 1958, the
Performers Protection Acts 1963 and 1972 and to any
subsequent statutory enactments and orders.
sent, which SHARP is unable to give. Please refer par-
ticularly to the provisions of the Copyright Act 1956, the
Dramatic and Musical Performers Protection Act 1958, the
Performers Protection Acts 1963 and 1972 and to any
subsequent statutory enactments and orders.
Note for users in the U.K.:
For other countries:
●
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright.
Please refer to the relevant laws in your country.
which must not be recorded without the authority of the
owner of the copyright.
Please refer to the relevant laws in your country.
ACCESSORY
AC power lead
×
1
●
For U.K. customers
●
For customers in
other countries
other countries
Note:
Parts and accessories mentioned in this operation ma-
nual other than those shown to the left are not included.
Parts and accessories mentioned in this operation ma-
nual other than those shown to the left are not included.
PRECAUTIONS
■
Please ensure that the equipment is positioned in a well
ventilated area and ensure that there is at least 10 cm of
free space along the sides, top and back of the equipment.
ventilated area and ensure that there is at least 10 cm of
free space along the sides, top and back of the equipment.
■
Do not use oil, solvents, petrol, paint thinners or insec-
ticides on the unit.
ticides on the unit.
■
Do not expose the unit to moisture, to temperatures higher
than 60˚C (140˚F) or to extreme low temperatures.
than 60˚C (140˚F) or to extreme low temperatures.
■
Keep the unit away from direct sunlight, strong magnetic
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which gener-
ates electrical noise.
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which gener-
ates electrical noise.
■
Hold the AC power plug by the head when removing it
from the AC socket, since pulling the lead can damage
internal wires.
from the AC socket, since pulling the lead can damage
internal wires.
■
When cleaning the heads, pinch roller, etc, remove the
AC power plug from the wall socket as the unit contains
high voltages.
Do not remove the outer cover, as this may result in elec-
tric shock. Refer internal service to your local SHARP ser-
vice facility.
AC power plug from the wall socket as the unit contains
high voltages.
Do not remove the outer cover, as this may result in elec-
tric shock. Refer internal service to your local SHARP ser-
vice facility.
■
Use the unit on a firm, level surface free from vibration,
and do not place anything on the top of the unit.
and do not place anything on the top of the unit.
■
If the unit does not work properly whilst in use, set the
STAND-BY/ON switch to STAND-BY and then to ON
again.
STAND-BY/ON switch to STAND-BY and then to ON
again.
■
If a lightning storm is taking place near you, it is suggested
that you disconnect the AC power lead from the AC socket
for safety.
that you disconnect the AC power lead from the AC socket
for safety.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage than that
which is specified is dangerous and may result in a fire or
other type of accident causing damage. SHARP will not be
held responsible for any damage resulting from use of this
unit with a voltage other than that which is specified.
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage than that
which is specified is dangerous and may result in a fire or
other type of accident causing damage. SHARP will not be
held responsible for any damage resulting from use of this
unit with a voltage other than that which is specified.
■
Condensation
Sudden temperature changes and storage or operation in
an extremely humid environment may cause condensation
inside the cabinet (tape head, etc.).
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no cassette in the
unit until normal playback is possible (about 1 hour).
an extremely humid environment may cause condensation
inside the cabinet (tape head, etc.).
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no cassette in the
unit until normal playback is possible (about 1 hour).
■
Volume control
It is advisable to avoid exposure to high volume levels, which
occur whilst turning the unit on with the volume control set-
ting up high, or whilst continually listening at high volumes.
occur whilst turning the unit on with the volume control set-
ting up high, or whilst continually listening at high volumes.
QT-120H(SUK) ?????????????
2
<P=002>
POWER SOURCE
■
AC power
Connect the AC power lead to the AC power input socket,
then connect the AC power lead plug to an AC socket.
then connect the AC power lead plug to an AC socket.
Notes:
●
If the unit will not be used for a long period of time, remove
the AC power lead from the AC socket.
the AC power lead from the AC socket.
●
When the AC power lead is plugged into the back of the
unit, the batteries are automatically disconnected.
unit, the batteries are automatically disconnected.
●
Never use a power lead other than the one supplied. Other-
wise, a malfunction or an accident may occur.
wise, a malfunction or an accident may occur.
●
If a humming noise occurs, turn the power plug upside
down where it is connected to the AC power input socket
on the unit.
down where it is connected to the AC power input socket
on the unit.
■
Battery power
1
Disconnect the AC power lead, and remove the battery
compartment cover.
compartment cover.
●
Use of the AC power lead disconnects the batteries.
2
Insert 8 "D" size batteries (UM/SUM-1, R20, HP-2 or simi-
lar) into the battery compartment.
lar) into the battery compartment.
●
When inserting batteries
④
and
⑧
, push them towards the
ë
battery terminal.
●
Installing the batteries incorrectly may cause the unit to
malfunction.
malfunction.
3
Replace the battery compartment cover.
Battery removal:
●
Push batteries
④
and
⑧
towards the
ë
battery terminal
and remove them.
Precautions for battery use:
●
Insert the batteries according to the direction indicated on
the rear panel.
the rear panel.
●
Remove the batteries if they are weak or if the unit is not
in use for long periods to prevent potential damage due
to battery leakage.
in use for long periods to prevent potential damage due
to battery leakage.
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Battery replacement:
Replace the batteries when they become weak and recording
or playback is impaired. This may occur even though radio
broadcasts are audible.
or playback is impaired. This may occur even though radio
broadcasts are audible.
To an AC socket
AC 230 V, 50 Hz
2
1
6
7
3
2
1
8
4
5
QT-120H(SUK) ?????????????
3
Display
