DOWNLOAD Sharp HT-SL50 (serv.man6) Service Manual ↓ Size: 290.11 KB | Pages: 6 in PDF or view online for FREE

Model
HT-SL50 (serv.man6)
Pages
6
Size
290.11 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Audio / Home Theatre / HDMI switching problem and background noise
File
ht-sl50-sm6.pdf
Date

Sharp HT-SL50 (serv.man6) Service Manual / Technical Bulletin ▷ View online

AUD 2012 02 01 
 
Date of Issue:         8
th 
February 2012 
         
Classification: 
White 
AUDIO TECHNICAL BULLETIN
 
Page 5 of 6 
 
 
Sharp Electronics (UK) Limited 
Reference – RG20120119
 
Revision  - 1 
 
White – Carry out as required 
Yellow – Carry out as required and whenever the unit comes in for service 
 Red – Carry out on all units   
Updating HDMI software. 
 
 
7.  Connect the HDMI programming tool as can be seen below and reconnect mains supply. 
 
 
8.  Ensure the Red Light is ON if not adjust switch J3. 
 
9.  Turn OFF the Mains supply. 
 
10.  Start PC program (EPFlash) program installed on the PC. 
 
 
 
AUD 2012 02 01 
 
Date of Issue:         8
th 
February 2012 
         
Classification: 
White 
AUDIO TECHNICAL BULLETIN
 
Page 6 of 6 
 
 
Sharp Electronics (UK) Limited 
Reference – RG20120119
 
Revision  - 1 
 
White – Carry out as required 
Yellow – Carry out as required and whenever the unit comes in for service 
 Red – Carry out on all units   
Make sure the PORT selected is correct (detach and attach back the USB cable should do 
the trick) 
 
11. Turn on the Mains supply to the unit and ensure both programmer lights are on. 
 
12. Click “open file” and locate the update software from your known location and press start. 
 
( if any error occurs, turn AC OFF and AC ON back, then click "START" again.) 
 
13. When reprograming is completed the message “ Write Block ( 0 – 155 ) OK” will be displayed 
as below 
 
 
 
14. Unplug the Mains supply and remove programming tools and check funtionality to ensure all 
is OK. 
 
 
 
 
 
 
 
 
 
AUD 2012 02 01 
 
Date of Issue:         8
th 
February 2012 
         
Classification: 
White 
AUDIO TECHNICAL BULLETIN
 
Page 6 of 6 
 
 
Sharp Electronics (UK) Limited 
Reference – RG20120119
 
Revision  - 1 
 
White – Carry out as required 
Yellow – Carry out as required and whenever the unit comes in for service 
 Red – Carry out on all units   
Make sure the PORT selected is correct (detach and attach back the USB cable should do 
the trick) 
 
11. Turn on the Mains supply to the unit and ensure both programmer lights are on. 
 
12. Click “open file” and locate the update software from your known location and press start. 
 
( if any error occurs, turn AC OFF and AC ON back, then click "START" again.) 
 
13. When reprograming is completed the message “ Write Block ( 0 – 155 ) OK” will be displayed 
as below 
 
 
 
14. Unplug the Mains supply and remove programming tools and check funtionality to ensure all 
is OK. 
 
 
 
 
 
 
 
 
 
AUD 2012 02 01 
 
Date of Issue:         8
th 
February 2012 
         
Classification: 
White 
AUDIO TECHNICAL BULLETIN
 
Page 6 of 6 
 
 
Sharp Electronics (UK) Limited 
Reference – RG20120119
 
Revision  - 1 
 
White – Carry out as required 
Yellow – Carry out as required and whenever the unit comes in for service 
 Red – Carry out on all units   
Make sure the PORT selected is correct (detach and attach back the USB cable should do 
the trick) 
 
11. Turn on the Mains supply to the unit and ensure both programmer lights are on. 
 
12. Click “open file” and locate the update software from your known location and press start. 
 
( if any error occurs, turn AC OFF and AC ON back, then click "START" again.) 
 
13. When reprograming is completed the message “ Write Block ( 0 – 155 ) OK” will be displayed 
as below 
 
 
 
14. Unplug the Mains supply and remove programming tools and check funtionality to ensure all 
is OK. 
 
 
 
 
 
 
 
 
 
Page of 6
Display

Sharp HT-SL50 (serv.man6) Service Manual / Technical Bulletin ▷ Download