Sharp HT-SB60 (serv.man2) User Manual / Operation Manual ▷ View online
9
8
7
6
5
4
3
2
1
9
5
2012 September 11
HT-SB60
Reference page
1. Remote Control Transmitter. . . . . . . . . . . . . . . . 10
2. TV ARC Button. . . . . . . . . . . . . . . . . . . . . . . . . 8, 12
3. Music (Sound Mode) Button. . . . . . . . . . . . . . . . 11
4. Cinema (Sound Mode) Button . . . . . . . . . . . . . . 11
5. Sport (Sound Mode) Button . . . . . . . . . . . . . . . . 11
6. BYPASS Button . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. 3D AUDIO Button. . . . . . . . . . . . . . . . . . . . . . . . . 12
8. APC Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. TV Operation Button . . . . . . . . . . . . . . . . . . . . . . 12
2. TV ARC Button. . . . . . . . . . . . . . . . . . . . . . . . . 8, 12
3. Music (Sound Mode) Button. . . . . . . . . . . . . . . . 11
4. Cinema (Sound Mode) Button . . . . . . . . . . . . . . 11
5. Sport (Sound Mode) Button . . . . . . . . . . . . . . . . 11
6. BYPASS Button . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. 3D AUDIO Button. . . . . . . . . . . . . . . . . . . . . . . . . 12
8. APC Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. TV Operation Button . . . . . . . . . . . . . . . . . . . . . . 12
10. AV SYNC Down Button . . . . . . . . . . . . . . . . . . . . 11
11. Source Button . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12
12. Subwoofer Level Down Button . . . . . . . . . . . . . 11
13. Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
14. On/Stand-by Button. . . . . . . . . . . . . . . . . . . . . . . 10
15. Game (Sound Mode) Button . . . . . . . . . . . . . . . . 11
16. News (Sound Mode) Button . . . . . . . . . . . . . . . . 11
17. Night (Sound Mode) Button . . . . . . . . . . . . . . . . 11
18. Dimmer Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
20. MUTE/Speaker Output Selection
11. Source Button . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12
12. Subwoofer Level Down Button . . . . . . . . . . . . . 11
13. Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
14. On/Stand-by Button. . . . . . . . . . . . . . . . . . . . . . . 10
15. Game (Sound Mode) Button . . . . . . . . . . . . . . . . 11
16. News (Sound Mode) Button . . . . . . . . . . . . . . . . 11
17. Night (Sound Mode) Button . . . . . . . . . . . . . . . . 11
18. Dimmer Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
20. MUTE/Speaker Output Selection
Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
21. AV SYNC Up Button . . . . . . . . . . . . . . . . . . . . . . 11
22. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . 11
23. Subwoofer Level Up Button . . . . . . . . . . . . . . . . 11
24. Treble Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
25. Volume Down Button . . . . . . . . . . . . . . . . . . . . . 11
22. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . 11
23. Subwoofer Level Up Button . . . . . . . . . . . . . . . . 11
24. Treble Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
25. Volume Down Button . . . . . . . . . . . . . . . . . . . . . 11
Note:
Some models of SHARP TV may not be operable.
Controls and indicators (continued)
2
3
4
3
4
5
7
8
10
12
13
1
9
11
6
15
16
17
17
18
19
20
21
23
22
24
25
14
AUDIO
TV Operation Buttons (Only SHARP TV):
On/Stand-by
Button
Button
Sets the TV
power to
“ON” or
“STAND-BY”.
power to
“ON” or
“STAND-BY”.
Input Select
Button (TV)
Button (TV)
Press the
button to
switch the
input source.
button to
switch the
input source.
Channel Up
and Down
Buttons
and Down
Buttons
Switch up/
down the TV
channels.
down the TV
channels.
Volume Up
and Down
Buttons
and Down
Buttons
Turn up/
down the TV
volume.
down the TV
volume.
Remote Control
9
1
7
6
5
4
3
2
1
9
2012 September 11
HT-SB60
6
Caution:
●
Be very careful to prevent the sound bar 3.6 kg from falling
when mounting on the wall.
when mounting on the wall.
●
Before mounting, check the wall strength. (Do not put
on the veneer plaster or whitewashed wall. The sound
bar may fall.) If unsure, consult a qualified service
technician.
on the veneer plaster or whitewashed wall. The sound
bar may fall.) If unsure, consult a qualified service
technician.
●
Mounting screws are not supplied. Use appropriate
ones.
ones.
●
Check all wall mount angle screws for looseness.
●
Select a good location. If not, accidents may occur or
the sound bar may get damaged.
the sound bar may get damaged.
●
SHARP is not responsible for accidents resulting
from improper installation.
SHARP designed the sound bar so you may hang them on
the wall. Use proper screws (not supplied). See below for
size and type.
the wall. Use proper screws (not supplied). See below for
size and type.
Note:
Make sure all screws are fully tightened. (screws are not
supplied)
Make sure all screws are fully tightened. (screws are not
supplied)
Falling prevention
Safety wires (not supplied) are useful to prevent the sound
bar from falling off the table.
bar from falling off the table.
Loop the safety wires (not supplied) into each hole as
shown and tie the safety wires to the LCD TV stand.
shown and tie the safety wires to the LCD TV stand.
Sound bar preparation
To mount the sound bar on the wall
■
Driving screws
■
Fixing wall mount angle
(Horizontal position)
1
Fix the pattern paper to the wall in horizontal
position as below.
2
Make a hole on the wall following the screw point
marks on the pattern paper by using a drill.
3
Fix a wall mount plug (not supplied) into the hole
using a hammer, until it is flush with the wall
surface.
3.2 mm
9 mm
Min. 22 mm
5 mm
Pattern paper
Wall surface
29 mm
44 mm
926 mm
44 mm
29 mm
Wall surface
8-9 mm
32 mm
Wall surface
8-9 mm
32 mm
4
Screw the wall mount angle to the wall as shown in
the illustration. (Total screw is 8 pieces)
■
Installing the sound bar
1
Align the wall mount slot at the sound bar to the
wall mount angle.
2
Slot the sound bar into the wall mount angle.
3
Fix them securely.
Wall surface
Wall mount angle
Wall mount
angle
angle
Wall
surface
Wall surface
Wall
mount
angle
mount
angle
(screws x 4)
(screws x 4)
Wall surface
9
8
7
6
5
4
3
2
1
9
7
2012 September 11
HT-SB60
Installation image:
Place the system as shown.
Remove the protective film covering the sound bar and
subwoofer before turn on the system.
subwoofer before turn on the system.
Notes:
●
As the sound from the system is omni-directional, you can
place the sound bar anywhere you like. However, it is
recommended to place it as close to the TV as possible.
place the sound bar anywhere you like. However, it is
recommended to place it as close to the TV as possible.
●
The front panel of the sound bar is not removable.
Caution:
●
Do not change the installation direction when the sound
bar is turned on.
bar is turned on.
●
Do not stand or sit on the sound bar and subwoofer as
you may be injured.
you may be injured.
Caution
●
Do not allow any objects to fall into or to be placed in the bass reflex duct.
●
Do not stand or sit on the sound bar/subwoofer. You may be injured.
Placing the system
TV
VCR
DVD player
Subwoofer
Sound Bar
Place the stand as shown.
Placing the stand
Stand
Make sure to unplug the AC power lead before making any connections.
System connections
AC INPUT
PAIRING
Subwoofer
Sound Bar
Wall socket
AC 220 - 240 V ~ 50/60 Hz
AC 220 - 240 V ~ 50/60 Hz
Wall socket
AC 220 - 240 V ~ 50/60 Hz
AC 220 - 240 V ~ 50/60 Hz
Sound bar and Subwoofer connection
9
1
7
6
5
4
3
2
1
9
2012 September 11
HT-SB60
8
The illustration below shows the flows of the signals.
1. Method 1
This connection is for HDMI TV with ARC (Audio Return Channel).
This connection is for HDMI TV with ARC (Audio Return Channel).
2. Method 2
This connection is for HDMI TV without ARC (Audio Return Channel).
This connection is for HDMI TV without ARC (Audio Return Channel).
Notes:
●
This sound bar supports HDMI which enables ARC (Audio Return Channel).
●
To enable ARC make sure to use High Speed HDMI™ cable (with ARC).
●
This ARC feature requires TV that supports ARC. Refer the operation manual of the TV to determine which terminal supports ARC.
●
To listen to the sound from a non-ARC-compatible TV, connect the audio output from TV to this system’s. (refer page 9)
●
This sound bar can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC
(Consumer Electronics Control). If this does not work, it does not mean this system is faulty. Refer to the operation manual of
the respective component on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming for the
CEC. For SHARP LCD TV, it is named as AQUOS LINK.
(Consumer Electronics Control). If this does not work, it does not mean this system is faulty. Refer to the operation manual of
the respective component on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming for the
CEC. For SHARP LCD TV, it is named as AQUOS LINK.
●
CEC is not available during Low power consumption mode.
●
To listen to the sound from this system, you will need to press and hold the (MUTE) button (refer page 12) or adjust
the speaker output settings within the TV menu.
For details, refer to the operation manual of the TV.
●
If you are unable to select external speaker setting from the TV menu (E.g. For SHARP LCD TV, it is named as AQUOS
AUDIO SP), turn the CEC OFF and ON again.
●
To enjoy 3D images, this system must be connected to a 3D-compatible TV and components (3D BD player, etc.) via High Speed
HDMI cables. Put on the 3D glasses, otherwise 3D images may not be viewed properly.
HDMI cables. Put on the 3D glasses, otherwise 3D images may not be viewed properly.
●
If you want to use HDMI IN 1 socket, please use the supplied HDMI cable.
System connections (continued)
HDMI Connection
Caution:
Turn off all other equipment before making this connection.
Turn off all other equipment before making this connection.
To select HDMI 1, 2 or TV ARC function (Source):
Press SOURCE button repeatedly until “HDMI 1”, “HDMI 2” or “TV ARC” appears on the display, or
press TV ARC button on the remote control to select the TV ARC.
Press SOURCE button repeatedly until “HDMI 1”, “HDMI 2” or “TV ARC” appears on the display, or
press TV ARC button on the remote control to select the TV ARC.
DVD/Blu-ray
Digital tuner
TV
Audio and Video signal
TV
DVD, Blu-ray disc
player or similar
player or similar
To HDMI output
terminal
To HDMI (TV ARC) input terminal
Sound Bar
To HDMI OUT (TV ARC) output terminal
To HDMI input
terminal
TV
DVD, Blu-ray disc
player or similar
player or similar
To HDMI output
terminal
To HDMI input terminal
To HDMI input terminal
To HDMI OUT (TV ARC) output terminal
Sound Bar
To audio output terminal
To Headphone
terminal
Click on the first or last page to see other HT-SB60 (serv.man2) service manuals if exist.