Sharp HT-DV40H (serv.man4) Service Manual ▷ View online
HT-DV40H
2 – 3
[3] DVD Test Mode
[STEP 1]
[STEP 2]
[STEP 3]
[STEP 4]
[STEP 5]
[STEP 6]
[STEP 7]
[STEP 8]
[STEP 9]
[STEP 10]
[STEP 11]
At testmode menu, select
"DVD TEST MODE" by
turning VOL Jog UP and Down
and press [STOP] key to enter
dvd test mode
In dvd test mode, DVD start up in cd mode
but no need to do disc reading process
but no need to do disc reading process
Note 1:
Press [DVD/CD] key at remote control to
turn ON CD Laser
Press again [DVD/CD] key at remote
control, this time to turn ON DVD
Laser
"CD_LASER_ON" appear in unit
display
Press again [DVD/CD] key at remote
control, this time to turn OFF the
laser
Press POWER key to exit the test
mode.
EXIT the test mode
END
"DVD TEST", will appear in
unit display
"DVD_LASER ON" appear in unit
display
"LASER OFF" appear in unit
display
HT-DV40H
2 – 4
[4] DVD Firmware Update Test Mode
After enter testmode menu, press
[PLAY] key at main unit to select
"FW UPDATE TEST MODE" to
"FW UPDATE TEST MODE" to
enter this mode
After ENTER key is pressed,
unit display at lower row will show
"_UPDATING_" blinking display
Press ENTER
key to start F/W upgrade.
After update process completed,
new firmware version will be
displayed in unit display lower row as
"FW_SRCV_
ϠϠ"
END
Plug in USB device
User press [POWER] key to
exit this testmode
When enter firmware upgrade menu,
unit display at lower row change to
"FW_SRCV_
"FW_SRCV_
ϠϠ" blinking at 2Hz
Note 2:
Make sure there is "DVDROM.bin" file inside the usb device
Note 3:
"_UPDATING_" blinking display means DVD
firmware upgrade is in progress.
During firmware upgrading is in progress, do not
POWER OFF the unit!
Note 1:
To enter testmode, during AC supply off
condition, whilst pressing down STOP key and
POWER key together, turn ON AC Supply.
" FW_UPDATE_ " will appear on upper row of
unit display and current firmware version DVD
will appear on lower row of unit display as "
FW_SRCV ** "
HT-DV40H
2 – 5
[5] DVD Region Code Setup ( For Service Centre )
Function of DVD SETUP mode such as to change region setting, parental level setting, parental control password &
VCD on/off selection.
To enter DVD SETUP mode, press " 2158 " at DVD function during no disc condition.
DVD SETUP detail show as below.
VCD on/off selection.
To enter DVD SETUP mode, press " 2158 " at DVD function during no disc condition.
DVD SETUP detail show as below.
REGION
REGION 0
( Region All )
REGION 1
( Region 1 )
REGION 2
( Region 2 )
REGION 3
( Region 3 )
REGION 4
( Region 4 )
REGION 5
( Region 5 )
REGION 6
( Region 6 )
RATING
1. KID SAFE
2. G
3. PG
4. PG13
5. PG-R
6. R
7. NC-17
8. ADULT
2. G
3. PG
4. PG13
5. PG-R
6. R
7. NC-17
8. ADULT
PASSWORD
0000
( Parental Control Password )
VCD PLAY
ON
( Select "ON" to enable VCD playback )
OFF
( Select "OFF" to disable VCD playback )
EXIT SETUP
HT-DV40H
2 – 6
Amp abnormal detection and System PROTECTION display
In case amp abnormal detection or System PROTECTION had occurred, the unit will automatically enter to stand-by
mode and Timer indicator will flashing as below.
mode and Timer indicator will flashing as below.
Example : In case of amp abnormal
Software RESET.
Function:
- Software RESET ( Press Eject + Power key while set at Standby mode ).
All the function condition will be initialize.
After display "CLEAR ALL", the unit will shows demo display.
After display "CLEAR ALL", the unit will shows demo display.
BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering / parts replacement.
1. Press the ON / STAND-BY button to power on the unit.
2. Select DVD / CD function, then press [SHIFT]+[SETUP] key at remote control to enter DVD SETUP menu.
3. Use cursor up / down key to select DEFAULT, then press cursor RIGHT key to select "RESTORE".
4. While cursor is highlited at "RESTORE" press ENTER key.
5. After that select "EXIT SETUP" and press ENTER key.
6. Press the ON / STAND-BY button to enter standby mode.
7. While pressing down EJECT button, press the ON / STAND-BY button. "CLEAR ALL" will be display at FL.
8. Unplug the AC cord and the unit is ready for transporting.
Note:
Connect this unit to TV in order to view step no 1 ~ 5.
ON
FLASHING
FLASHING
ON
ON
ON
TIMER
LED
LED
OFF
NO. 1
OFF
OFF
NO. 3
OFF
OFF
NO. 4
NO. 1
OFF
NO. 2
NO. 2
1 FRAME
(REPEAT)
NO. 1 : System Protect
NO. 2 : Amp abnormal
NO. 3 : DVD +B Protect
NO. 4 : FAN LOCK detection
NO. 2 : Amp abnormal
NO. 3 : DVD +B Protect
NO. 4 : FAN LOCK detection
Click on the first or last page to see other HT-DV40H (serv.man4) service manuals if exist.