Sharp HT-CN500DVH User Manual / Operation Manual ▷ View online
E-14
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
F
S
V
I
N
P
E
D
HT-CN500DVH
Sys
tem Connec
tions
- Conne
c
tions
to TV
, VCR, e
tc
. -
!
Audio connection to TV or VCR
You can enjoy surround sound from TV or VCR by connecting them to the unit as
shown.
shown.
!
Audio connection to other equipment
To listen to TV or VCR sound via the speakers of this unit:
!
Connecting the AC power lead
After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket.
of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be used for a pro-
longed period of time.
longed period of time.
TV
VCR
To audio
output sockets
output sockets
Audio cable
(commercially available)
(commercially available)
To audio
output sockets
output sockets
Audio signal
Audio signal
MD recorder
Audio signal
Audio cable
(commercially available)
(commercially available)
To audio
input socket
input socket
Notes:
"
Change the TV input in accordance with the connected socket.
"
Do not connect other equipment (VCR, etc.) between the TV and this unit. Pic-
tures may be distorted.
tures may be distorted.
"
Refer to the operation manual of the equipment to be connected.
"
Insert the plugs fully to avoid fuzzy pictures or noise.
Press the AUX button repeatedly to select the desired audio input.
Unit display
"
For the TV, select "AUX
1 IN".
1 IN".
"
For the VCR, select
"AUX 2 IN".
"AUX 2 IN".
"
Alternatively, press the FUNCTION button on
the main unit.
the main unit.
ENTER
SLEEP
ST/MO
DISPLAY
LANGUAGE
MUTE
PROG
MENU/PBC
TITLE
SUBTITLE
SET UP
OPEN/
CLOSE
ON/
STAND-BY
A - B
REPEAT 1
SLEEP
PROG
CHP
SET
KHz
MHz
A - B
REPEAT 1
SLEEP
PROG
CHP
SET
KHz
MHz
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
E-15
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
HT-CN500DVH
Pr
epara
tion f
o
r Us
e
- S
yst
em
in
st
alla
ti
o
n
-
System installation
!
Placing the speaker system
The best surround effect will be achieved by placing each speaker at the same
distance from the listening position.
It is recommended to arrange the speakers as shown below.
distance from the listening position.
It is recommended to arrange the speakers as shown below.
Notes:
"
Place the TV halfway between the front speakers.
"
It is recommended that the centre speaker be placed near the television.
"
Place the surround speakers at a position just above the height of your ears.
"
The subwoofer vibrates whilst reproducing bass. Place it on a stable, sturdy sur-
face.
face.
"
The subwoofer reproduces bass. Place it anywhere you like.
!
Magnetically shielded speakers
The front and centre speakers may be placed beside or near the TV as they are mag-
netically shielded. However, discolouration may occur depending on the TV type.
netically shielded. However, discolouration may occur depending on the TV type.
If colour variation occurs...
Turn off the TV (with the power switch).
After 15 - 30 minutes, turn the TV on again.
After 15 - 30 minutes, turn the TV on again.
If the colour variation is still present...
Move the speakers further away from the TV.
Refer to the manual of the TV for details.
Refer to the manual of the TV for details.
Note:
The surround speakers and subwoofer are not magnetically shielded.
Note:
If speakers cannot be placed at equal distances, refer to "Speaker delay time set-
ting" (see page 45).
ting" (see page 45).
Installation image:
The speaker stands and speaker wall brackets are optionally available (see page 3).
Refer to their instructions for assembly.
Refer to their instructions for assembly.
Front
speaker (left)
Subwoofer
Front
speaker (right)
speaker (right)
Surround
speaker (left)
speaker (left)
Surround
speaker (right)
speaker (right)
Centre
speaker
Front speaker (left)
Same distance
Front speaker (right)
Centre speaker
Same distance
4
S
H
A
R
P
9
2LC
N
4
00
E
E
0
27
0
0
E-16
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
F
S
V
I
N
P
E
D
HT-CN500DVH
Pr
epara
tion f
o
r Us
e
- Bat
te
ry
inst
a
llat
ion / T
u
rn
in
g
th
e
po
w
e
r
o
n
-
Battery installation
Precautions for battery use:
"
Replace all old batteries with new ones at the same time.
"
Do not mix old and new batteries.
"
Remove the batteries if the unit is not to be used for long periods of time. This will
prevent potential damage due to battery leakage.
prevent potential damage due to battery leakage.
Caution:
"
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
"
Incorrect installation may cause the unit to malfunction.
Notes concerning use:
"
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
"
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
with a soft cloth.
"
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
Change the lighting or the direction of the unit.
"
Keep the remote control away from moisture, heat, shock, and vibrations.
Turning the power on
!
Test of the remote control
Check the remote control operation after making all the connections (see pages 11 -
14).
Point the remote control directly at the remote sensor on the unit.
14).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy your
system.
system.
!
To turn the power on
Press the ON/STAND-BY button.
If the power does not turn on, check the AC power lead is plugged in properly.
To set the unit to the stand-by mode:
Press the ON/STAND-BY button again.
The power stand-by indicator lights up.
The power stand-by indicator lights up.
1 Open the battery cover.
2 Insert the supplied batteries according to the direction indicated in
2 Insert the supplied batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
nals.
3 Close the cover.
ENTER
ST/MO
DISPLAY
LANGUAGE
MUTE
MENU/PBC
TITLE
SUBTITLE
SET UP
OPEN/
CLOSE
ON/
STAND-BY
Remote sensor
0.2 m - 6 m
(8" - 20')
(8" - 20')
ON/
STAND-BY
Power stand-by indicator
5
S
H
A
R
P
9
2LC
N
4
00
E
E
0
27
0
0
E-17
HTCN400_500DVH_E.fm
03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
HT-CN500DVH
Pr
epara
tion f
o
r Us
e
- Cha
nging the
s
e
tup me
n
u
-
Changing the setup menu
Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc. accord-
ingly.
ingly.
Notes:
"
During playback, "PREFERENCES" settings cannot be changed.
"
Settings are stored even if the unit is set to the stand-by mode.
"
The backup function protects the stored settings for a few hours should there be a
power failure or the AC power lead disconnection.
power failure or the AC power lead disconnection.
PRESET
ADJ/VOL
9
8
7
6
5
4
0
>10
3
2
1
ENTER
SLEEP
ST/MO
TUNING
DISPLAY
LANGUAGE
MUTE
PROG
MENU/PBC
NTSC/PAL
STEP
A-B
REPEAT
ANGLE
DIRECT
LISTENING
SLOW/MEMORY
TITLE
ZOOM
AUDIO
RETURN
MODE
SUBTITLE
SET UP
OPEN/
CLOSE
ON/
STAND-BY
SET UP
ENTER
ON/
STAND-BY
NTSC/PAL
1
Press the ON/STAND-BY button to turn the
power on.
power on.
"
The startup screen appears.
"
The startup screen does not appear when the in-
put is not set to the disc mode. Press the DVD
button.
put is not set to the disc mode. Press the DVD
button.
"
If the startup screen is blurred, press the NTSC/
PAL button repeatedly to change the TV type.
PAL button repeatedly to change the TV type.
2
Press the SET UP button.
3
Press the or button to select a menu
and press the ENTER button.
and press the ENTER button.
See the list on pages 18 - 19 for setup menu.
4
Press the , , or button to change the
setting and press the ENTER button.
setting and press the ENTER button.
"
See the list on pages 18 - 19 for the selectable
parameters.
parameters.
"
Select "MAIN PAGE" and press the ENTER but-
ton. The main page returns.
ton. The main page returns.
5
Press the SET UP button.
"
The setting is completed.
"
To change other settings, begin from step 2.
DVD
VideoCD
CD
VideoCD
CD
Audio Visual
Entertainment
Entertainment
SETUP MENU -- MAIN PAGE
SPEAKER SETUP
AUDIO SETUP
AUDIO SETUP
EXIT SETUP
GO TO GENERAL SETUP PAGE
PREFERENCES
GENERAL SETUP
-- GENERAL PAGE --
TV TYPE
MAIN PAGE
SET OSD LANGUAGE
VIDEO OUTPUT
TV DISPLAY
FRENCH
GERMAN
ITALIAN
SPANISH
GERMAN
ITALIAN
SPANISH
ENGLISH
SCR SAVER
OSD LANG
Click on the first or last page to see other HT-CN500DVH service manuals if exist.