DOWNLOAD Sharp GX-BT3 (serv.man2) Service Manual ↓ Size: 3.71 MB | Pages: 16 in PDF or view online for FREE

Listening to Bluetooth enabled devices (continued)

■

Check that:

The source device Bluetooth functionality is ON.
Pairing of this unit and the source device is completed.
Unit is in connected mode (pairing indicator (BLUE) lights 
up.)

Press the ON/STAND-BY button to turn the power on.

Press the BLUETOOTH button on the remote control or 
FUNCTION button repeatedly on the main unit to select 
Bluetooth function.

Start  the  Bluetooth  connection  from  the  Bluetooth 
stereo audio source device.

Playback will start automatically, otherwise press play 
(on remote control or source device).
Notes:

For  various  Bluetooth  operations,  refer  “NFC  con-
nection for audio playback” on page 6.
If  the  source  device  has  an  extra  bass  function  or 
equalizer function, set them to off. If these functions 
are on, sound may be distorted.

●

●

Make the Bluetooth connection again if the source device 

is not turned on, or its Bluetooth functionality is off or is in 

sleep mode.

●
●
●

●

To disconnect the Bluetooth device

■

Perform any of the followings.
- Disconnect the Bluetooth connection on the audio source 

device.

  Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this unit.
Note:
The volume of this unit may not be controlled as intended 
depending on the device.

■

During Bluetooth stand-by mode, the unit will automatically 

power on when the Bluetooth connection has been set up 

between the main unit and your device.
Note:

This function is not applicable during Eco mode.

  Use  a  connection  lead  to  plug  in  the  portable  audio 

player, etc. to the AUDIO IN socket. When using video 
equipment, plug in the audio output to this unit and the 
video output to a television.

2  Press the ON/STAND-BY button to turn the power on.

3  Press  the  AUDIO  IN  button  on  the  remote  control  or 

FUNCTION button repeatedly on the main unit to select 
AUDIO IN function.

4  Play  the  connected  equipment.  If  volume  level  of  the 

connected device is too high, sound distortion may oc-
cur. Should this happen, lower the volume of the con-
nected device. If volume level is too low, increase the 
volume of the connected device.

Note:
To  prevent  noise  interference,  place  the  unit  away  from 
the television.

■

Portable audio 

player, etc.

Audio cable (not supplied)

Many  potential  problems  can  be  resolved  by  the  owner 
without calling a service technician.
If  something  is  wrong  with  this  product,  check  the  fol-
lowing  before  calling  your  authorised  SHARP  dealer  or 
service centre.

■



  When a button is 

pressed, the unit 
does not respond.



  Set the unit to the power 

stand-by mode and then 
turn it back on.



  If the unit still malfunctions, 

reset it. (Refer page 10)



  No sound is heard.



  The volume level is set to 

minimum.

■



  The remote control 

does not operate.



  The AC power lead of the 

unit is not plugged in.



  The battery is exhausted.



  The distance or angle is 

incorrect.



  The remote control sensor 

receives strong light.

■

No sound is heard.

●

The unit is too far from the 

Bluetooth stereo audio 

source device.

The unit is not paired 

with the Bluetooth stereo 

audio source device.

●

●

Bluetooth sound 

is interrupted or 

distorted.

●

The unit is too near to 

a device that generates 

electromagnetic radiation.

There is an obstacle 

between the unit and the 

Bluetooth stereo audio 

source device.

●

●

NFC-enabled device 

cannot connect to 

Bluetooth via NFC tag.

●

Main unit is not in 

Bluetooth pairing mode. 

Perform “NFC connection 

for audio playback”. 

(Refer page 6.)

●

■

Sudden  temperature  changes,  storage  or  operation  in 
an  extremely  humid  environment  may  cause  condensa-
tion inside the cabinet or on the transmitter on the remote 
control. Condensation can cause the unit to malfunction. 
If this happens, leave the power on until normal playback 
is possible (about 1 hour). Wipe off any condensation on 
the transmitter with a soft cloth before operating the unit.



When this product is subjected to strong external inter-
ference  (mechanical  shock,  excessive  static  electricity, 
abnormal supply voltage due to lightning, etc.) or if it is 
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:

  Set the unit to the stand-by mode and turn the power 

on again.

2  If the unit is not restored in the previous operation, un-

plug and plug in the unit again, and then turn the power 
on.

Note:
If neither operation above restores the unit, clear all the 
memory by resetting it.



  Press the AUDIO IN (remote control) or FUNCTION but-

ton repeatedly (main unit) to select AUDIO IN function.

2  Press  /  button.

3  Within 1 second, press and hold 

 button until PAIR-

ING indicator lights up.

Caution:
This operation will restore the unit to factory default con-
dition.



Caution:
Remove device plugged in to the unit. Then, set the unit 
to the power stand-by mode. Transporting the unit with 
other device plugged in might damage the units.

■

Periodically wipe the cabinet with a soft cloth and a di-
luted soap solution, then with a dry cloth.
Caution:


  Do not use chemicals for cleaning (petrol, paint thinner, 

etc.). It may damage the cabinet.



  Do not apply oil to the inside of the unit. It may cause 

malfunctions.

As part of our policy of continuous improvement, SHARP 
reserves  the  right  to  make  design  and  specification 
changes  for  product  improvement  without  prior  notice. 
The performance specification figures indicated are nomi-
nal values of production units. There may be some devia-
tions from these values in individual unit.

■

AC 100 - 240 V ~ 50/60 Hz

AC:  Power on: 5 W
 

Power stand-by: 0.4 W (*)

Width: 446 mm (17 - 9/16’’)
Height: 155 mm (6 - 1/8”)
Depth: 154 mm (6 - 1/16”)

2.5 kg (5.5 lbs.) 

2.400GHz - 2.480GHz

Bluetooth Profile

A2DP (Advanced Audio 
Distribution Profile), AVRCP (Audio/
Video Remote Control Profile)
Bluetooth 2.1 +EDR

( * )  This power consumption value is obtained when the 

Bluetooth  stand-by  mode  is  cancelled  in  the  power 
stand-by mode. Refer to page 4 to cancel the Blue-
tooth stand-by mode.

■

Front speaker:
MPO: 10 W (5 W + 5 W)
RMS: 10 W (5 W + 5 W) (10% 
T.H.D.)
RMS: 7 W (3.5 W + 3.5 W) (1% 
T.H.D.)
Subwoofer:
MPO: 14 W
RMS: 10 W (10% T.H.D.)
RMS: 8 W (1% T.H.D.)

Audio In (audio signal):
500 mV/47 k ohms

■

2-way type speaker system
Front Speakers:
5 cm (2”) - 3 Ω - Full Range
Subwoofer: 8 cm (3-1/8”) - 6 Ω 
- woofer

Front Speakers: 10 W / Channel
Subwoofer: 10 W / Channel

Front Speakers: 5 W / Channel
Subwoofer: 5 W / Channel

FOR LOCATION ENQUIRIES WITHIN

REGARDING YOUR LOCAL

VISIT OUR WEBSITE AT

TELEPHONE:  09 573 0111

FACSIMILE:  09 573 0113

FOR LOCATION ENQUIRIES WITHIN

REGARDING YOUR LOCAL

VISIT OUR WEBSITE AT

OR CALL SHARP CUSTOMER CARE

(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)

CONTACT YOUR SELLING DEALER/RETAILER

OR CALL

SPform019(AUGUST 2011)

For Australia and New Zealand customers

FOR LOCATION ENQUIRIES WITHIN

REGARDING YOUR LOCAL

VISIT OUR WEBSITE AT

TELEPHONE:  09 573 0111

FACSIMILE:  09 573 0113

FOR LOCATION ENQUIRIES WITHIN

REGARDING YOUR LOCAL

VISIT OUR WEBSITE AT

OR CALL SHARP CUSTOMER CARE

SPform019(AUGUST 2011)

(LOCAL CALL COST6 APPLY WITHIN AUSTRALIA)

CONTACT YOUR SELLING DEALER/RETAILER

OR CALL

 

 

 

 

 

SHARP

 

 

 

 

 

SHARP

For Australia and New Zealand customers

This Sharp product is warranted against faults in material and manufacture for the

period as stated in the table below.
If service is required during the warranty period, please contact your nearest Sharp

Approved Service Centre. These repairs would be carried out at no charge to the

owner, subject to the conditions specified herein. 

This warranty does not extend to defects or injuries caused by or resulting from causes 

not attributable to faulty parts or the manufacture of the product, including but not 

limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of 

maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, 

software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a

warranty claim. This warranty is in addition to and in no way limits, varies or excludes

any implied rights and remedies under any relevant legislation in the country of sale.

Home Theatre Projector 12 months

Audio/Home Theatre

12 months

Microwave Oven

12 months

Steam Oven

12 months

Refrigerator

24 months

DVD/Blu-ray

12 months

Air Conditioner

60 months

Portable Air Conditioner

12 months

LCD Television

12 months

Air Purifier

12 months

Vacuum Cleaner

24 months

SPform 040 (JUNE 2012)

Australian customers: Our goods come with guarantees that cannot be excluded 

under the Australian Consumer Law. You are entitled to a replacement or refund 

for a major failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired or replaced 

if the goods fail to be of acceptable quality and the failure does not amount

to a major failure. The criteria of a major failure is defined in the Australian 

Consumer Law. Should you require any assistance with a major failure please

contact Sharp Customer Care.

This warranty does not cover transportation to and from the Sharp Approved Service

Centre. Goods presented for repair may be replaced by refurbished goods of the same 

type rather than being repaired. Refurbished parts may be used to repair the goods.

The repair of your goods may result in the loss of user generated data, please ensure 

that you have saved this data elsewhere prior to repair.

(excluding lamps and air filters)