Sharp DK-UH2BK User Manual / Operation Manual ▷ View online
10
DK-UH2
DK-UH2(BK)
Basic Operation
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on. The POWER
indicator lights up.
indicator lights up.
Illumination light control
When the power is turned on, POWER and DISPLAY indicators light
up. To turn on/off the light, hold down the SNOOZE/DIMMER button
on the main unit or remote control for more than 2 seconds.
up. To turn on/off the light, hold down the SNOOZE/DIMMER button
on the main unit or remote control for more than 2 seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or higher,
the volume starts at 16 and fades in to the last set level.
the volume starts at 16 and fades in to the last set level.
Volume control
Main unit and Remote control operation:
Press the VOL (+ or -) button to increase or decrease the volume.
Press the VOL (+ or -) button to increase or decrease the volume.
E SOUND control
When the E SOUND/DEMO button is pressed, the unit will enter the
E SOUND mode, and E SOUND indicator lights up. This mode adjust
low bass and high frequency automatically according to volume
input. To cancel this mode, press the E SOUND/DEMO button again.
E SOUND mode, and E SOUND indicator lights up. This mode adjust
low bass and high frequency automatically according to volume
input. To cancel this mode, press the E SOUND/DEMO button again.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
The display indicator lights up, and the POWER indicator goes off.
Press the ON/STAND-BY button to enter the power stand-by mode.
The display indicator lights up, and the POWER indicator goes off.
MUSIC SYSTEM
DK-UH2
SNOOZE/DIMME
R
ON
/S
TA
ND
-B
Y
VO
L
-
VO
L
+
CL
OC
K
E
SO
UN
D/
DE
MO
4
4
7
6
POWER
Indicator
Indicator
E Sound
Indicator
Indicator
Display
Indicator
Indicator
0...30 MAXIMUM
11
DK-UH2
DK-UH2(BK)
Basic Operation
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
[When the unit is in the power stand-by mode]
Press the CLOCK button. The time display will appear for about 10
seconds.
[When the unit is in the power stand-by mode]
Press the CLOCK button. The time display will appear for about 10
seconds.
[When the power is on]
Press DISPLAY button on the remote control to toggle between the
function information and clock display.
Press the CLOCK button. The time display will appear for about 10
seconds.
Press DISPLAY button on the remote control to toggle between the
function information and clock display.
Press the CLOCK button. The time display will appear for about 10
seconds.
Notes:
The clock will continue counting for 8 hours should there be a
power failure or the AC power lead becomes disconnected.
The “CLOCK ADJ” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
power failure or the AC power lead becomes disconnected.
The “CLOCK ADJ” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform “Setting the clock” from step 1 to step 4.
Perform “Setting the clock” from step 1 to step 4.
To change the 24-hour or 12-hour display:
Summer time:
1
Press and hold down the CLOCK button on the main unit or
remote control for more than 2 seconds.
remote control for more than 2 seconds.
2
Press the
or
button to select 24-hour or 12-hour
display and then press the CLOCK button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(12:00 AM- 11:59 PM)
3
Press the
or
button to adjust the hour and then
press the CLOCK button.
Press the
or
button once to advance the time by 1 hour.
Hold it down to advance continuously.
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
CLOCK
MUSIC SYSTEM
DK-UH2
SN
OO
ZE
/D
IM
ME
R
ON/S
TAND-BY
VO
L
-
VO
L
+
CL
OC
K
E S
OU
ND
/D
EM
O
4
4
7
6
4
Press the
or
button to adjust the minutes and then
press the CLOCK button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minutes interval.
1
Clear all the programmed contents. [Refer to “Factory reset,
clearing all memory” on page 21 for details.]
clearing all memory” on page 21 for details.]
2
Perform “Setting the clock” from step 1.
1
Press the
button at remote control to advance the time
1 hour.
indicator will appear on display.
2
Press the
button again to turn the clock back 1 hour.
“0:00”
“12:00”
12
DK-UH2
DK-UH2(BK)
USB Memory Playback
Listening to USB mass storage device/MP3 player
To playback MP3/WMA (Windows Media Audio)
file
file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files from. Follow the
instructions from the website on how to download the music files.
You can then playback these downloaded music files by saving them
to a USB mass storage device or MP3 player.
MP3/WMA (Windows Media Audio) music files from. Follow the
instructions from the website on how to download the music files.
You can then playback these downloaded music files by saving them
to a USB mass storage device or MP3 player.
Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.
usage of the song without owner’s permission, is against the law.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
“MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 192 kbps.
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 192 kbps.
Auto power on function:
When you press any of the following buttons, the unit turns on.
When you press any of the following buttons, the unit turns on.
/ button (main unit and remote control): The unit turns on and
USB playback starts regardless of last function.
FUNCTION button (remote control): The unit turns on at last
function (USB, AUX).
FUNCTION button (remote control): The unit turns on at last
function (USB, AUX).
Note:
This product is not compatible with MTP and AAC file systems.
This product is not compatible with MTP and AAC file systems.
MUSIC SYSTEM
DK-UH2
SN
OO
ZE
/D
IM
M
ER
ON/S
TAND-BY
VOL
-
VOL
+
CL
OC
K
E
SO
UN
D/
DE
MO
4
4
7
6
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
FUNCTION
13
DK-UH2
DK-UH2(BK)
USB Memory Playback
About folder playback order
If MP3/WMA files are located in several folders, a folder number will
be set to each folder automatically.
be set to each folder automatically.
These folders can be selected by the FOLDER button on the remote
control. If there is no supported file formats inside the selected folder,
the file is skipped and the next file will be selected.
Example: How to set folder number if MP3/WMA format files are
located as below figure.
control. If there is no supported file formats inside the selected folder,
the file is skipped and the next file will be selected.
Example: How to set folder number if MP3/WMA format files are
located as below figure.
* The folder and file order information which is transferred on the
USB mass storage device/MP3 player depends on the writing
software. There may be possibilities that this unit will play back the
files not according to your expected playback order.
USB mass storage device/MP3 player depends on the writing
software. There may be possibilities that this unit will play back the
files not according to your expected playback order.
Folder mode on/off can be operated by the FOLDER button on the
remote control during stop mode only. Files that are played when
folder mode is set to the on position, may differ from those played
back when folder mode is turned off.
remote control during stop mode only. Files that are played when
folder mode is set to the on position, may differ from those played
back when folder mode is turned off.
Folder Mode Off case:
All the files starting from the selected file will be played back. If file 3
inside Folder C is selected, all the files starting from file 3 until file 10
will be played back.
All the files starting from the selected file will be played back. If file 3
inside Folder C is selected, all the files starting from file 3 until file 10
will be played back.
Folder Mode On case:
Only files inside the selected folder will be played back.
In case Folder D is selected, file 4, 5 and 6 will be played back. File
7 and 8 in Folder E will not be played back.
Only files inside the selected folder will be played back.
In case Folder D is selected, file 4, 5 and 6 will be played back. File
7 and 8 in Folder E will not be played back.
1. ROOT folder is set as folder 1.
2. As for folders inside ROOT folder (Folder A and Folder B), the
2. As for folders inside ROOT folder (Folder A and Folder B), the
folder which is transferred earlier on the USB mass storage
device/MP3 player will be set as folder 2.
device/MP3 player will be set as folder 2.
3. As for folder inside Folder A (Folder C and Folder D), the folder
which is transferred earlier on the USB mass storage device/
MP3 player will be set as folder 3.
MP3 player will be set as folder 3.
4. Because there is no folder in Folder C, Folder D will be set
as folder 4.
5. Folder E which is inside Folder D will be set as folder 5.
6. Folder B inside the ROOT folder will be set as folder 6.
6. Folder B inside the ROOT folder will be set as folder 6.
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
ROOT
(FOLDER 1)
(FOLDER 1)
FOLDER A
(FOLDER 2)
(FOLDER 2)
FOLDER B
(FOLDER 6)
(FOLDER 6)
FILE 7
FILE 8
FILE 8
FILE 1
FILE 2
FILE 3
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)
FILE 5
FILE 6
FOLDER E
(FOLDER 5)
FOLDER C
(FOLDER 3)
(FOLDER 3)
FOLDER D
(FOLDER 4)
(FOLDER 4)
FILE 9
FILE 10
FILE 10
Click on the first or last page to see other DK-UH2BK service manuals if exist.