Sharp DK-UH2BK User Manual / Operation Manual ▷ View online
8
DK-UH2
DK-UH2(BK)
Preparation for Use
Power source
Using with the AC/DC adaptor
Notes:
Unplug the AC/DC adaptor from the wall socket if the unit will not
be used for a prolonged period of time.
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
Demonstration mode
The first time the unit is plugged in, the unit will enter the
demonstration mode. You will see words scroll.
demonstration mode. You will see words scroll.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the E SOUND/
DEMO button on main unit or remote control again.
DEMO button on main unit or remote control again.
Notes:
When the power is on, the E SOUND/DEMO button can be used
to select the E SOUND mode.
to select the E SOUND mode.
The E SOUND/DEMO button does not function during timer
stand-by. Cancel the timer if you want to enter the demonstration
mode.
stand-by. Cancel the timer if you want to enter the demonstration
mode.
Make sure to unplug the AC power lead before making any
connections.
connections.
1
Plug the AC power lead into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC INPUT socket on
the unit.
the unit.
3
Plug the AC power lead and switch on the power supply.
The display indicator lights up when the AC power is
applied. The POWER indicator will turn BLUE when the
system is “ON”.
The display indicator lights up when the AC power is
applied. The POWER indicator will turn BLUE when the
system is “ON”.
DC IN 6V
AUX IN
DC IN 6V
AUX IN
DC INPUT Socket
AC/DC Adaptor Cable
2
(DC 6V)
AC /DC Adaptor
AC Power Lead
Wall Socket
1
3
(AC 100 - 240 V~ 50/60 Hz)
To cancel the demonstration mode:
When the unit is in the power stand-by
mode (demonstration mode),
press the E SOUND/DEMO button on
main unit or remote control. The
demonstration mode will be cancelled
and the display will be disappear.
mode (demonstration mode),
press the E SOUND/DEMO button on
main unit or remote control. The
demonstration mode will be cancelled
and the display will be disappear.
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
E SOUND
/DEMO
9
DK-UH2
DK-UH2(BK)
Preparation for Use
Remote control
Battery installation
Precautions for battery use:
Remove the battery if the unit will not be used for long periods of time.
This will prevent potential damage due to battery leakage.
This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable battery (nickel-cadmium battery, etc.).
Replace only with the same or equivalent type.
Installing the battery incorrectly may cause the unit to malfunction.
Danger of explosion if battery is incorrectly replaced.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
excessive heat such as sunshine, fire or the like.
Notes concerning use:
Replace the battery if the operating distance is reduced or if the
operation becomes erratic. Purchase “CR 2025”, coin lithium
battery.
operation becomes erratic. Purchase “CR 2025”, coin lithium
battery.
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
operation. Change the lighting or the direction of the unit if this
occurs.
Keep the remote control away from moisture, heat, shock, and
vibrations.
vibrations.
Test of the remote control
Check the remote control after checking all the connections (see
pages 8 - 9).
Point the remote control directly at the remote sensor on the unit.
pages 8 - 9).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
1
Whilst pushing the locking tab towards the centre of the remote
control, slide out the battery holder.
control, slide out the battery holder.
2
Remove the old battery from the battery holder, insert the new
battery and then slide the battery holder back into the remote
control.
battery and then slide the battery holder back into the remote
control.
Back of remote control
Locking tab
Locking tab
Positive (+)
side up
side up
Battery holder
Battery type
Polarity (+) symbol
MUSIC SYSTEM
DK-UH2
SN
OO
ZE
/D
IM
ME
R
ON
/S
TA
ND
-B
Y
VO
L
-
VO
L
+
CL
OC
K
E
SO
UN
D/
DE
MO
4
4
7
6
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
Remote sensor
10
DK-UH2
DK-UH2(BK)
Basic Operation
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on. The POWER
indicator lights up.
indicator lights up.
Illumination light control
When the power is turned on, POWER and DISPLAY indicators light
up. To turn on/off the light, hold down the SNOOZE/DIMMER button
on the main unit or remote control for more than 2 seconds.
up. To turn on/off the light, hold down the SNOOZE/DIMMER button
on the main unit or remote control for more than 2 seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or higher,
the volume starts at 16 and fades in to the last set level.
the volume starts at 16 and fades in to the last set level.
Volume control
Main unit and Remote control operation:
Press the VOL (+ or -) button to increase or decrease the volume.
Press the VOL (+ or -) button to increase or decrease the volume.
E SOUND control
When the E SOUND/DEMO button is pressed, the unit will enter the
E SOUND mode, and E SOUND indicator lights up. This mode adjust
low bass and high frequency automatically according to volume
input. To cancel this mode, press the E SOUND/DEMO button again.
E SOUND mode, and E SOUND indicator lights up. This mode adjust
low bass and high frequency automatically according to volume
input. To cancel this mode, press the E SOUND/DEMO button again.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
The display indicator lights up, and the POWER indicator goes off.
Press the ON/STAND-BY button to enter the power stand-by mode.
The display indicator lights up, and the POWER indicator goes off.
MUSIC SYSTEM
DK-UH2
SNOOZE/DIMME
R
ON
/S
TA
ND
-B
Y
VO
L
-
VO
L
+
CL
OC
K
E
SO
UN
D/
DE
MO
4
4
7
6
POWER
Indicator
Indicator
E Sound
Indicator
Indicator
Display
Indicator
Indicator
0...30 MAXIMUM
11
DK-UH2
DK-UH2(BK)
Basic Operation
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
[When the unit is in the power stand-by mode]
Press the CLOCK button. The time display will appear for about 10
seconds.
[When the unit is in the power stand-by mode]
Press the CLOCK button. The time display will appear for about 10
seconds.
[When the power is on]
Press DISPLAY button on the remote control to toggle between the
function information and clock display.
Press the CLOCK button. The time display will appear for about 10
seconds.
Press DISPLAY button on the remote control to toggle between the
function information and clock display.
Press the CLOCK button. The time display will appear for about 10
seconds.
Notes:
The clock will continue counting for 8 hours should there be a
power failure or the AC power lead becomes disconnected.
The “CLOCK ADJ” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
power failure or the AC power lead becomes disconnected.
The “CLOCK ADJ” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform “Setting the clock” from step 1 to step 4.
Perform “Setting the clock” from step 1 to step 4.
To change the 24-hour or 12-hour display:
Summer time:
1
Press and hold down the CLOCK button on the main unit or
remote control for more than 2 seconds.
remote control for more than 2 seconds.
2
Press the
or
button to select 24-hour or 12-hour
display and then press the CLOCK button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(12:00 AM- 11:59 PM)
3
Press the
or
button to adjust the hour and then
press the CLOCK button.
Press the
or
button once to advance the time by 1 hour.
Hold it down to advance continuously.
FUNCTION
CLOCK
SLEEP
TIMER
SNOOZE/
DIMMER
DIMMER
VOL
MEMORY
DISPLAY
PLAY
MODE
E SOUND
/DEMO
FOLDER
CLOCK
MUSIC SYSTEM
DK-UH2
SN
OO
ZE
/D
IM
ME
R
ON/S
TAND-BY
VO
L
-
VO
L
+
CL
OC
K
E S
OU
ND
/D
EM
O
4
4
7
6
4
Press the
or
button to adjust the minutes and then
press the CLOCK button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minutes interval.
1
Clear all the programmed contents. [Refer to “Factory reset,
clearing all memory” on page 21 for details.]
clearing all memory” on page 21 for details.]
2
Perform “Setting the clock” from step 1.
1
Press the
button at remote control to advance the time
1 hour.
indicator will appear on display.
2
Press the
button again to turn the clock back 1 hour.
“0:00”
“12:00”
Click on the first or last page to see other DK-UH2BK service manuals if exist.