DOWNLOAD Sharp DK-UH2 Service Manual ↓ Size: 2.51 MB | Pages: 24 in PDF or view online for FREE

DK-UH2

DK-UH2(BK)

If MP3/WMA files are located in several folders, a folder number will
be set to each folder automatically.

These folders can be selected by the FOLDER button on the remote
control. If there is no supported file formats inside the selected folder,
the file is skipped and the next file will be selected.
Example: How to set folder number if MP3/WMA format files are
located as below figure.

* The folder and file order information which is transferred on the
USB  mass storage device/MP3 player depends on the writing
software. There may be possibilities that this unit will play back the
files not according to your expected playback order.

Folder mode on/off can be operated by the FOLDER button on the
remote control during stop mode only. Files that are played when
folder mode is set to the on position, may differ from those played
back when folder mode is turned off.

Folder Mode Off case:
All the files starting from the selected  file will be played back. If file 3
inside Folder C is  selected, all the files starting from file 3 until file 10
will be played back.

Folder Mode On case:
Only files inside the selected folder will be played back. 
In case Folder D is selected, file 4, 5 and 6 will be played back. File
7 and 8 in Folder E will not be played back.

1. ROOT folder is set as folder 1.
2. As  for folders  inside  ROOT  folder (Folder A and Folder B), the 

folder  which  is  transferred  earlier  on  the  USB  mass  storage 
device/MP3 player will be set as folder 2.

3. As for folder inside Folder A (Folder C and Folder D),  the  folder 

which  is  transferred  earlier  on  the  USB  mass  storage device/
MP3 player will be set as folder 3.

4. Because  there  is  no  folder  in  Folder C, Folder D  will  be  set 

as folder 4.

5. Folder E which is inside Folder D will be set as folder 5.
6. Folder B inside the ROOT folder will be set as folder 6.

ROOT
(FOLDER 1) 

FOLDER A
(FOLDER 2)

FOLDER B
(FOLDER 6)

FILE 7
FILE 8

FILE 1
FILE 2
FILE 3

FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)

FOLDER C
(FOLDER 3)

FOLDER D
(FOLDER 4)

FILE 9
FILE 10

DK-UH2

DK-UH2(BK)

Note:
Do  not  connect  the  audio  cable  to  AUX  IN  socket  during  USB
playback. Otherwise, it will enter the AUX function automatically.

When the USB memory is connected to the main unit, the 
device information will be displayed.

In case folder is selected, proceed to step 2.
In case file is selected, proceed to step 4.

Press the FOLDER button, and press the   or   button to
select desired playback folder. (Folder mode on)

To start playback with folder mode on, go to step 5.
To change the playback folder, press the   or   button to select 
another folder.

 button. Proceed to step 5.

MP3 indicator

WMA indicator

Total number 
of files

Total number 
of folders

DK-UH2

DK-UH2(BK)

Note:
To pause playback:
Press the   /    button at main unit or remote control.

Auto power off function:
In the stop mode of USB operation, the main unit enters the power
stand-by mode after 15 minutes of inactivity.

SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
The  USB  memory  device  connected  via  USB  hub  cannot  be
operate by this unit.
If “NO SUPPRT” is displayed, it means the file is either a
“Copyright protected WMA file” or is a “Not supported playback
file”.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
External HDD-storage cannot be played back by this unit.
In case the data inside the USB memory device is large, it may
take a longer time for data to be read.

 button. (Folder mode off)

Press the   /   button.
Playback will start and the track number and time counter
will be displayed.

Title, Artist and Album name are displayed if they are recorded 

in the USB memory device.

Display content can be changed by pressing the DISPLAY button

on remote control.

(

) Only appears when clock is already set.

File Name

Track Number and Time Counter

Title

Artist

Album

(

) Clock

DK-UH2

DK-UH2(BK)

Repeat play can play all tracks, folder or a programmed sequence
continuously.

To cancel repeat play:
Press the PLAY MODE button repeatedly until “ ” disappears.

The tracks can be played in random order automatically.

To cancel random play:
Press the PLAY MODE button until “RND” disappears.

If you press the 

 button during random play, you can move to

the track selected next by the random operation. On the other
hand, the 

 button does not allow you to move to the previous

track. The beginning of the track being played will be located.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)

This unit only supports “MPEG-1 Audio Layer-3” format.
(Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2 Audio Layer-3” , “MPEG-2.5 Audio Layer-3” and MP1,
MP2 formats are not supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~192 kbps.
For MP3/WMA files, please use “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This   unit   can   display   Folder   Name   or   File   Name   up   to  32 
characters.
Maximum total number of MP3/WMA files is 40 000. Maximum
total number of folders is 200 inclusive of root directory. Folders
which have non playable files are also counted.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
The ID3TAG information supported are TITLE, ARTIST and
ALBUM only.
Title name, artist name and album name can be displayed by
pressing the DISPLAY button during file playback or pause mode.
WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
Copyright protected WMA files cannot be played back.

Press  the  PLAY  MODE  button  on  the  remote  control  until “ ” 
appears. 
Press the   /   button.

To random play all tracks:
Press the PLAY MODE button repeatedly until “RND” appears.
Press the   /   button.

(

)  When folder mode is on, the selected play mode can be used for

the files in the selected folder only.