Sharp DK-AP2BK (serv.man2) User Manual / Operation Manual ▷ View online
13
DK-AP2
DK-AP2(BK)
Ref
erences
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet or on
the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before
operating the unit.
humid environment may cause condensation inside the cabinet or on
the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before
operating the unit.
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
plug in the unit, and then turn the power on.
Before transporting the unit
Remove the iPod from the unit. Then, set the unit to the power stand-
by mode. Carrying the unit with iPod left docked might damage both
the unit and the iPod.
by mode. Carrying the unit with iPod left docked might damage both
the unit and the iPod.
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
* This power consumption value is obtained when in the power
stand-by mode.
Power source
DC IN 6V
2A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
DC IN 3V
[ “AA” size (UM/SUM-3, R6 or
HP-7) battery x 4]
Power
consumption
consumption
Power on : 3.8 W
Power stand-by: 0.2 W*
Power stand-by: 0.2 W*
Output power
Speakers:
RMS: 3.8 W (1.9 W + 1.9 W) (10% T.H.D.)
RMS: 3.8 W (1.9 W + 1.9 W) (10% T.H.D.)
Speaker
1-way type speaker system
Speakers: 5 cm (2") - 6 ohms - Full Range
Speakers: 5 cm (2") - 6 ohms - Full Range
Speaker maximum
input power
input power
3.8 W/Channel
Speaker rated
input power
input power
1.9 W/Channel
Output terminals
Video output: 1Vp-p
Input terminals
Auxiliary (audio signal):
500 mV/47 k ohms
500 mV/47 k ohms
Dimensions
Width: 380 mm (15")
Height: 157 mm (6-2/5")
Depth: 221 mm (8-7/10")
Height: 157 mm (6-2/5")
Depth: 221 mm (8-7/10")
Weight
1.2 kg (2.65 lbs)
MEMO
MEMO
03/11/4
DK-AP2_BACK.fm
TINSEA187AWZZ
07G R MW 2
07G R MW 2
