DOWNLOAD Sharp CD-XP300 Service Manual ↓ Size: 178.34 KB | Pages: 2 in PDF or view online for FREE

Model
CD-XP300
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
178.34 KB
Type
PDF
Document
Service Manual / Parts Guide
Brand
Device
Audio / System / Names of parts
File
cd-xp300.pdf
Date
PREV: Sharp CD-XP250H (serv.man3) Service Manual / Technical Bulletin

Sharp CD-XP300 Service Manual / Parts Guide ▷ View online

CD-XP300H
– 4 –
NAMES OF PARTS
CD-XP300H
Front panel
1. Disc Tray 
2. Timer Set Indicator 
3. On/Stand-by Button 
4. Tuner (Band) Button 
5. CD Button 
6. Headphone Socket
7. Tape (1     2) Button  
8. Video/Auxiliary Button 
9. RDS Programme Type/Traffic Information Search Button 
10. RDS ASPM (Auto Station Programme Memory) Button 
11. RDS Display Mode Selector Button 
12. Equaliser Mode Select/Extra Bass/Demo Mode Button 
13. Disc Tray Open/Close Button 
14. Disc Skip Button 
15. Volume Up and Down Buttons 
16. Tape 1 Cassette Compartment 
17. Tape 2 Cassette Compartment 
18. CD Track Down or Fast Reverse, Tape 2 Rewind, 
Tuner Preset Down Button 
19. CD Track Up or Fast Forward, Tape 2 Fast Forward, 
Tuner Preset Up Button 
20. Clock Button
21. Timer/Sleep Button 
22. CD Play or Repeat, Tape Play Button 
23. CD or Tape Stop Button 
24. Tuning and Time Down Button 
25. Memory/Set Button 
26. Tape 2 Record Pause Button 
27. Tuning and Time Up Button 
3
2
1
4
7
8
12
13
14
15
9
10
11
17
5
6
16
18
22
23 24
27
26
25
20
19
21
Display
1. CD Pause Indicator
2. Extra Bass Indicator
3. Disc Number Indicators
4. Tape 2 Record Indicator
5. FM Stereo Mode Indicator
6. FM Stereo Receiving Indicator
7. Timer Play Indicator
8. Sleep Indicator
9. Timer Recording Indicator
10. CD Play Indicator
11. CD Repeat Play Indicator
12. RDS Indicator
13. Tape Play Indicator 
14. Dynamic PTY Indicator
15. Traffic Programme Indicator
16. Traffic Announcement Indicator
17. Memory Indicator
 
Rear panel
1. Cooling Fan  
2. AC Power Lead 
3. Transport Screw 
4. FM 75 Ohms Aerial Socket 
5. AM Loop Aerial Socket 
6. Video/Auxiliary (Audio Signal) Input Sockets
7. Speaker Terminals 
4
5
1
2
6
7
3
2
4 5 6
3
1
13
12
10
11
15
16
17
14
9
8
7
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
1
2
3
3
4
CP-XP300H
– 5 –
CD-XP300H
1
2
3
4
5
6
7
8
9
10
11
12
15
16
17
18
19
13
14
20
Remote control
1. Remote Control Transmitter 
2. On/Stand-by Button
3. Disc Number Select Buttons 
4. CD Random Button 
5. CD Memory Button 
6. Tape 2 Record Pause Button 
7. CD Track Down or Fast Reverse, Tape 2 Rewind Button    
8. CD or Tape Stop Button 
9. Tuner (Band) Button
10. CD Button 
11. Video/Auxiliary Button 
12. Extra Bass Button 
13. Equaliser Mode Select Button 
14. CD Clear Button
15. Tuner Preset Up and Down Buttons 
16. CD Pause Button 
17. CD Track Up or Fast Forward, Tape 2 Fast Forward Button 
18. CD Play or Repeat, Tape Play Button 
19. Tape (1      2) Button 
20. Volume Up and Down Buttons
Buttons with "   " mark in the illustration can be operated on the remote control
only.
Other buttons can be operated both on the main unit and the remote control.
CD-XP300H
OPERATION MANUAL
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
Note:
To readjust the clock:
Perform "Setting the clock" from step 1. If the time display is flashing, step 3 (for
selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK button and within 5 seconds, press the MEMO-
RY/SET button.
3
Press the TUNING/TIME (  or  ) button to select 24-hour or 12-
hour display and then press the MEMORY/SET button.
"0:00"
The 24-hour display will appear.
 
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
 
(AM 12:00 - PM 11 :59)
"AM 0:00"
The 12-hour display will appear.
 
(AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it has been reset. 
[Refer to "Clearing all the memory (reset)".] 
4
Press the TUNING/TIME (  or  ) button to adjust the hour and then
press the MEMORY/SET button.
Press the TUNING/TIME (  or  ) button once to advance the time by 1 hour. 
Hold it down to advance continuously.
When the 12-hour display is selected, "AM" will change automatically to "PM".
5
Press the TUNING/TIME (  or  ) button to adjust the minutes and
then press the MEMORY/SET button.
Press the TUNING/TIME (  or  ) button once to advance the time by 1 
minute. Hold it down to change the time in 5-minute intervals.
The hour will not advance even if minutes advance from "59" to "00".
The clock begins counting from "0" seconds. (Seconds are not displayed.) 
The time display will disappear after a few seconds.
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 5 seconds.
1
Clear all the programmed contents. [Refer to "Clearing all the memory (reset)".] 
2
Perform "Setting the clock" from step 1.
Display

Sharp CD-XP300 Service Manual / Parts Guide ▷ Download

  • DOWNLOAD Sharp CD-XP300 Service Manual ↓ Size: 178.34 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Parts Guide for the Sharp CD-XP300 in PDF for free, which will help you to disassemble, recover, fix and repair Sharp CD-XP300 System. Information contained in Sharp CD-XP300 Service Manual / Parts Guide (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

CD-XP300 Service Manuals

Preview DownloadPagesSize
CD-XP300 (serv.man3) Front cover Service Manual 1 135.14 KB
CD-XP300 (serv.man22) Service Manual 64 3.74 MB
CD-XP300 (serv.man21) Wiring of primary supply leads Service Manual 1 13.91 KB
CD-XP300 (serv.man20) Display data Service Manual 1 25.41 KB
CD-XP300 (serv.man19) IC data Service Manual 6 61.87 KB
CD-XP300 (serv.man18) Troubleshooting table Service Manual 4 313.35 KB
CD-XP300 (serv.man17) Waveforms Service Manual 1 328.89 KB
CD-XP300 (serv.man16) Voltage tables Service Manual 1 16.06 KB
CD-XP300 (serv.man15) PWB layouts and wiring diagrams Service Manual 7 919.06 KB
CD-XP300 (serv.man14) Schematic diagrams Service Manual 11 890.92 KB
CD-XP300 (serv.man13) Block diagrams Service Manual 3 94.98 KB
CD-XP300 (serv.man12) Notes on schematic diagram Service Manual 1 14.11 KB
CD-XP300 (serv.man11) Test mode Service Manual 2 18.02 KB
CD-XP300 (serv.man10) Adjustments Service Manual 2 59.3 KB
CD-XP300 (serv.man9) Removing and installing the main parts Service Manual 2 66.04 KB
CD-XP300 (serv.man8) Disassembly Service Manual 3 175.3 KB
CD-XP300 (serv.man7) Quick set up guide Service Manual 2 224.35 KB
CD-XP300 (serv.man6) Troubleshooting from Service Manual 1 80.96 KB
CD-XP300 (serv.man5) Explanation of the RDS system Service Manual 1 43.45 KB
CD-XP300 (serv.man4) Safety precautions and important servicing notes Service Manual 1 58.66 KB
CD-XP300 (serv.man2) Service Manual / Parts Guide 12 496.57 KB
CD-XP300 (serv.man23) Service Manual / Specification 1 14.25 KB
CD-XP300 (serv.man24) Locking of CD changer mechanism before transportation Service Manual / Technical Bulletin 1 38.09 KB
CD-XP300 (serv.man25) Replacing the CD mechanism holder Service Manual / Technical Bulletin 2 118.54 KB

RANDOM: