Sharp CD-XP110 (serv.man17) Service Manual ▷ View online
– 5 –
CD-XP110H
DISASSEMBLY
Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
Figure 5-2
Figure 5-1
Figure 5-3
CD-XP110H
1
Top Cabinet
1. Screw ...................... (A1) x4
5-1
2
Side Panel
1. Screw ...................... (B1) x6
5-1
(Left/Right)
3
CD Player Unit
1. Turn on the power supply, ..
5-2
open the disc tray, take out
the CD tray cover, and close.
2. CD Tray Cover ........ (C1) x1
3. Hook ........................ (C2) x2
4. Socket ..................... (C3) x4
the CD tray cover, and close.
2. CD Tray Cover ........ (C1) x1
3. Hook ........................ (C2) x2
4. Socket ..................... (C3) x4
5-3
5. Screw ...................... (C4) x2
5-2
4
Rear Panel
1. Screw ...................... (D1) x8
5-2
5
Main PWB
1. Screw ...................... (E1) x5 5-2,5-3
2. Socket ..................... (E2) x7
2. Socket ..................... (E2) x7
5-3
6
Front Panel
1. Screw ....................... (F1) x3
5-3
2. Hook ......................... (F2) x2
7
Switch A PWB
1. Screw ...................... (G1) x3
6-1
2. Socket ..................... (G2) x1
8
Display PWB
1. Screw .................... (H1) x10
6-1
9
Tape Mechanism 1. Open the cassette holder.
6-1
2. Screw...................... (J1) x8
10
Headphones PWB 1. Screw ...................... (K1) x1
6-1
11
Turntable
1. Screw ....................... (L1) x1
6-2
2. Spacer ...................... (L2) x1
12
Loading Tray
1. Push forward the loading tray.
6-2
2. Inserting the flat head into the
hole, push in the direction indi-
cated by the arrow. ... (M1) x2
cated by the arrow. ... (M1) x2
13
CD Servo PWB
1. Screw ...................... (N1) x3
6-3
(Note 1)
2. Socket ..................... (N2) x5
14
Switch B PWB
1. Screw ...................... (P1) x2
6-3
15
CD Mechanism
1. Screw ...................... (Q1) x4
6-4
2. Spring ...................... (Q2) x4
STEP
REMOVAL
PROCEDURE
FIGURE
Note 1:
1. After removing the connector for the optical pickup from the
1. After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.
of the connector so as to protect the optical pickup from electro-
static damage.
CD-XP110H
Rear
Panel
Panel
Side Panel
(Right)
(Right)
Side Panel
(Left)
(Left)
Top Cabinet
Front
Panel
Panel
(A1)x2
ø3x16mm
ø3x16mm
(A1)x2
ø3x16mm
ø3x16mm
(B1)x2
ø3x8mm
ø3x8mm
(B1)x2
ø3x8mm
ø3x8mm
(B1)x2
ø3x10mm
ø3x10mm
CD Player
Unit
Unit
1
1
2
2
Main PWB
Rear
Panel
Panel
Pull
Pull
Front
Panel
Panel
(D1)x1
ø3x10mm
ø3x10mm
(E1)x1
ø3x10mm
ø3x10mm
(E1)x2
ø3x8mm
ø3x8mm
(C4)x2
ø3x6mm
ø3x6mm
(D1)x6
ø3x8mm
ø3x8mm
(D1)x1
ø3x10mm
ø3x10mm
(C2)x1
(C1)x1
(C2)x1
Front
Panel
Panel
Main PWB
Power
PWB
PWB
(E2)x2
(E2)x3
(E2)x2
(F2)x1
(F2)x1
(C3)x1
(C3)x3
(F1)x3
ø3x6mm
ø3x6mm
(E1)x1
ø3x8mm
ø3x8mm
(E1)x1
ø4x10mm
ø4x10mm
CD-XP110H
– 6 –
Figure 6-1
Figure 6-2
Figure 6-3
Figure 6-4
(H1)x10
ø2.5x10mm
ø2.5x10mm
(J1)x8
ø3x8mm
(K1)x1
ø2.5x10mm
ø2.5x10mm
Display PWB
Display PWB
Switch A
PWB
PWB
Headphones
PWB
PWB
Open
Cassette
Holder
Holder
Tape
Mechanism
Mechanism
Front Panel
(G1)x3
ø2.5x10mm
(G2)x1
(L2)x1
Washer
(M1)x1
(M1)x1
(L1)x1
ø3x8mm
ø3x8mm
Screwdriver
Screwdriver
Turntable
Loading Tray
(N2)x1
(N2)x2
(N2)x1
(N2)x1
(N1)x3
ø3x24mm
ø3x24mm
CD Servo
PWB
PWB
Switch B
PWB
PWB
Loading
Tray
Tray
(P1)x2
ø3x8mm
ø3x8mm
(Q1)x4
ø2.5x8mm
ø2.5x8mm
(Q2)x4
CD Mechanism
Loading Tray
This speaker CP-XP110H is available in assembles only and
may not be disassembled.
may not be disassembled.
CP-XP110H
– 7 –
CD-XP110H
REMOVING AND REINSTALLING THE MAIN PARTS
TAPE MECHANISM SECTION
Perform steps 1 to 6 and 9 of the disassembly method to
remove the tape mechanism.
remove the tape mechanism.
Figure 7-1
Figure 7-2
Figure 7-3
Figure 7-4
Figure 7-5
How to remove the record/playback and erase
heads (TAPE 1) (See Fig. 7-1)
heads (TAPE 1) (See Fig. 7-1)
1. When you remove the screws (A1) x 2 pcs., the record/
playback head can be removed.
2. Move the hooks (A2) x 2 pcs., toward the center position as
shown in Fig. 7-1 and then lift the erase head.
How to remove the playback head (TAPE 2)
(See Fig. 7-2)
(See Fig. 7-2)
1. When you remove the screws (B1) x 2 pcs., the playback
head can be removed.
How to remove the pinch roller (TAPE 1)
(See Fig. 7-3)
(See Fig. 7-3)
1. When you remove the screw (C1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the pinch roller (TAPE 2)
(See Fig. 7-3)
(See Fig. 7-3)
1. When you remove the screw (D1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the tape motor (See Fig. 7-4)
1. Remove the belt.
2. Remove the screws (E1) x 6 pcs., to remove the motor
2. Remove the screws (E1) x 6 pcs., to remove the motor
bracket.
3. Remove the screws (E2) x 3 pcs., to remove the tape motor.
How to remove the belt (TAPE 1)
(See Fig. 7-5)
(See Fig. 7-5)
1. Remove the main belt (F1) x 1 pc., from the tape motor side.
2. Remove the FF/REW belt (F2) x 1 pc.
2. Remove the FF/REW belt (F2) x 1 pc.
How to remove the belt (TAPE 2)
(See Fig. 7-5)
(See Fig. 7-5)
1. Remove the main belt (G1) x 1 pc., from the tape motor side.
2. Remove the FF/REW belt (G2) x 1 pc.
2. Remove the FF/REW belt (G2) x 1 pc.
Record/Playback
Head
Head
Erase
Head
Head
(A1)x1
ø2x3mm
ø2x3mm
(A1)x1
ø2x7mm
ø2x7mm
Hook
(A2)x2
(A2)x2
TAPE 1
TAPE 2
(B1)x1
ø2x6mm
ø2x6mm
(B1)x1
ø2x6mm
ø2x6mm
Playback
Head
Head
Tape
Motor
Motor
(E2)x3
Special Screw
Special Screw
Motor
Bracket
Bracket
(E1)x2
ø2x4mm
ø2x4mm
(E1)x2
ø2x4mm
ø2x4mm
(E1)x2
ø2x4mm
ø2x4mm
Tape
Motor
Motor
Motor
Bracket
Bracket
TAPE 2
Pinch Roller
TAPE 1
Pinch Roller
(C1)x1
ø2x4mm
ø2x4mm
(D1)x1
ø2x4mm
ø2x4mm
TAPE 2
TAPE 1
TAPE 2
Main Belt
(G1)x1
Main Belt
(G1)x1
TAPE 1
Main Belt
(F1)x1
Main Belt
(F1)x1
Tape
Motor
Motor
Tape
Motor
Motor
REW/FF
Clutch Ass'y
Clutch Ass'y
REW/FF
Clutch Ass'y
Clutch Ass'y
Main
Belt
(F1)x1
Belt
(F1)x1
Main
Belt
(G1)x1
Belt
(G1)x1
REW/FF
Belt
(G2)x1
Belt
(G2)x1
REW/FF
Belt
(F2)x1
Belt
(F2)x1
CD-XP110H
– 8 –
How to remove the pickup (See Fig. 8-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 8-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the loading motor
(See Figs. 8-1, 8-2)
(See Figs. 8-1, 8-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the loading
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the loading
motor.
Figure 8-1
(B1)x2
ø3x8mm
ø3x8mm
(A1)x4
ø3x8mm
ø3x8mm
(B1)x3
ø3x8mm
ø3x8mm
Loading
Tray
Tray
(B3)x2
ø2.4x3mm
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
Motor
T/T Up/Down
Motor
Motor
(A3)x2
ø2.4x3mm
ø2.4x3mm
Figure 8-3
How to remove the T/T up/down motor
(See Figs. 8-1, 8-2)
(See Figs. 8-1, 8-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T up/
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T up/
down motor.
(C3)x1
ø2.6x6mm
ø2.6x6mm
CD
Mechanism
Mechanism
Stop Washer
(C1)x1
(C1)x1
Gear
(C2)x1
(C2)x1
Shaft
(C4)x1
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
ø2.6x6mm
Click on the first or last page to see other CD-XP110 (serv.man17) service manuals if exist.