Sharp CD-SW330H Service Manual ▷ View online
CD-SW330H
2 – 2
[2] Test Mode
• Setting the test mode
During stand-by mode, press GAME/VIDEO button
while pressing down the
• Setting the test mode
During stand-by mode, press GAME/VIDEO button
while pressing down the
button and
button.
then, press the CD button to enter the test mode.
IL isn’t done
OPEN/CLOSE operation is using manual.
IL isn’t done
<<
>>,<<
>>buttons make pick's slide possible.
IL isn’t done
to page 2-3
<<PLAY>> key input.
C D
T
E S T
A
Do TOC IL. Do normal play.
When these following key is input into PLAY key, track num-
ber can be appoint directly.
When these following key is input into PLAY key, track num-
ber can be appoint directly.
<<MEMORY>>
key input.
key input.
<<
1>> key: Track 4
<<
2>> key: Track 9
<<
3>> key: Track 15
Adjustment result automatically will
display as below for each 2 sec:
a) "FOF_XXXX"
b) "TOF_XXXX"
c) "TBAL_XX"
d) "TGAN_XX"
f) "FGAN_XX"
g) "RFLS_XX"
display as below for each 2 sec:
a) "FOF_XXXX"
b) "TOF_XXXX"
c) "TBAL_XX"
d) "TGAN_XX"
f) "FGAN_XX"
g) "RFLS_XX"
<<STOP>> key input.
STOP
explanation:
a) Focus off set
a) Focus off set
= "FOF_XXXX"
b) Tracking off set
= "TOF_XXXX"
c) Tracking balance
= "TBAL_XX"
d) Tracking Gain
= "TGAN_XX"
f) Focus Gain
= "FGAN_XX"
g) RF level shift
= "RFLS_XX"
VOL — Last memory
P.GEQ — FLAT
X-BASS — OFF
To cancel : Power OFF
P.GEQ — FLAT
X-BASS — OFF
To cancel : Power OFF
CD-SW330H
2 – 3
Sliding the PICKUP with<<
>>, <<
>> button
must only be in STOP mode.
<<MEMORY>> key input.
Laser ON.
<<MEMORY>> key input.
Tracking OFF play at that specific point.
<<MEMORY>> key input.
Tracking ON play from that specific point.
<<MEMORY>> key input.
Adjustment result automatically will display as below for each 2 sec :
a) "FOF_XXXX"
b) "TOF_XXXX"
c) "TBAL_XX"
d) "TGAN_XX"
f) "FGAN_XX"
g) "RFLS_XX"
a) "FOF_XXXX"
b) "TOF_XXXX"
c) "TBAL_XX"
d) "TGAN_XX"
f) "FGAN_XX"
g) "RFLS_XX"
<<STOP>> key input.
STOP
explanation:
a) Focus off set
a) Focus off set
= "FOF_XXXX"
b) Tracking off set
= "TOF_XXXX"
c) Tracking balance
= "TBAL_XX"
d) Tracking Gain
= "TGAN_XX"
f) Focus Gain
= "FGAN_XX"
g) RF level shift
= "RFLS_XX"
VOL — Last memory
P.GEQ — FLAT
X-BASS — OFF
To cancel : Power OFF
P.GEQ — FLAT
X-BASS — OFF
To cancel : Power OFF
A
CD-SW330H
2 – 4
[3] CD Section
CD Error code description
* 'CHECKING'
If Error is detected, 'CHECKING' will be displayed instead of 'ER-CD**'. 'ER-CD**' display will only be displayed
when error had been detected for the 5
when error had been detected for the 5
th
times.
Standard Specification of Stereo System Error Message Display Contents
(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**'. 'ER-CD**' display will
only be display when error had been detected for the 5
only be display when error had been detected for the 5
th
times.
Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had occurred, the unit will automatically enter to stand - by
mode and Timer indicator will be flashing as below.
mode and Timer indicator will be flashing as below.
+B PROTECTION is condition when irregular process occur on power supply line.
BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering/parts replacement.
1. Press the ON/STAND-BY button to enter stand-by mode.
2. While pressing down the
button and the
button, press the GAME/VIDEO button. The Micro Computer
version number will be displayed as "CM*****".
3. Press
button until "WAIT"
→ "FINISHED" appears.
4. Unplug the AC cord and the unit is ready for transporting.
Error
Explanation
10*
CAM error. Can't detect CAM switch when CAM is moving.
11*
When it detect cam operation error during initialize
process.
process.
20*
TRAY error. Can't detect TRAY switch when TRAY is
moving.
moving.
21*
When it detect TRAY operation error during initialize
process.
process.
31
When it change to CD function, DSP cannot read initial
data.
data.
Error Contents
Display
Notes
CD
CD Changer Mechanism Error.
'ER-CD**' (*)
10: CAM SW Detection NG during normal operation
11: CAM SW Detection NG during initialize process
20:TRAY SW Detection NG during normal operation
21:TRAY SW Detection NG during initialize process
11: CAM SW Detection NG during initialize process
20:TRAY SW Detection NG during normal operation
21:TRAY SW Detection NG during initialize process
CD DSP Communication Error.
'ER-CD31'
DSP COMMUNICATION ERROR.
Focus Not Match/IL Time Over.
'NO DISC'
TUNER
PLL Unlock.
PLL Unlock.
FM 87.5 MHz
FLASHING
1 FRAME
OFF
OFF
OFF
OFF
(REPEAT)
ON
TIMER
LED
LED
ON
NO. 1
NO. 2
NO. 1
NO. 2
NO.1 : +B Protection
NO.2 : Speaker abnormal
NO.2 : Speaker abnormal
FLASHING
Example : In case of speaker abnormal
CD-SW330H
2 – 5
[4] CD Changer Mechanism Section
• All numbers in the drawing correspond to those in parts guide (CHANGER MECHANISM PARTS).
• All numbers in the drawing correspond to those in parts guide (CHANGER MECHANISM PARTS).
140
141
HALF GEAR
MUST BE ARRANGED AS SHOWN
MUST BE ARRANGED AS SHOWN
1
Click on the first or last page to see other CD-SW330H service manuals if exist.