Sharp CD-E250 (serv.man8) Service Manual ▷ View online
CD-E250E
CD-E550E
– 10 –
Figure 10-1
CD PLAYER SECTION
Perform steps 1, 2, 3, 10,11, and 12 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the T/T rotate motor
(See Figs. 10-1)
(See Figs. 10-1)
1. Remove the screws (A1) x 2 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
motor.
(A1)x2
ø2.4x3mm
ø2.4x3mm
(A3)x2
ø3x10mm
ø3x10mm
(A2)x1
Loading Tray
(Bottom View)
(Bottom View)
Loading Tray
T/T Motor PWB
T/T Rotate Motor
(B1)x2
ø2.4x5mm
ø2.4x5mm
Up/Down Loading Motor
CD Player Unit
(B2)x1
Figure 10-2
How to remove the up/down loading motor
(See Figs. 10-2)
(See Figs. 10-2)
1. Remove the screws (B1) x 2 pcs.
2. Remove the belt (B2) x 1 pc.
2. Remove the belt (B2) x 1 pc.
How to remove the CD mechanism unit
(See Fig. 10-3)
(See Fig. 10-3)
Perform steps 1, 2, 3, 10and 13 of the disassembly method to
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
unit.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 10-3
Holder
CD Mechanism Unit
Holder
PWB
PWB
(C1)x4
ø2.5x10mm
ø2.5x10mm
CD-E250E
CD-E550E
– 10 –
Figure 10-1
CD PLAYER SECTION
Perform steps 1, 2, 3, 10,11, and 12 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the T/T rotate motor
(See Figs. 10-1)
(See Figs. 10-1)
1. Remove the screws (A1) x 2 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
motor.
(A1)x2
ø2.4x3mm
ø2.4x3mm
(A3)x2
ø3x10mm
ø3x10mm
(A2)x1
Loading Tray
(Bottom View)
(Bottom View)
Loading Tray
T/T Motor PWB
T/T Rotate Motor
(B1)x2
ø2.4x5mm
ø2.4x5mm
Up/Down Loading Motor
CD Player Unit
(B2)x1
Figure 10-2
How to remove the up/down loading motor
(See Figs. 10-2)
(See Figs. 10-2)
1. Remove the screws (B1) x 2 pcs.
2. Remove the belt (B2) x 1 pc.
2. Remove the belt (B2) x 1 pc.
How to remove the CD mechanism unit
(See Fig. 10-3)
(See Fig. 10-3)
Perform steps 1, 2, 3, 10and 13 of the disassembly method to
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
unit.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 10-3
Holder
CD Mechanism Unit
Holder
PWB
PWB
(C1)x4
ø2.5x10mm
ø2.5x10mm
CD-E250E
CD-E550E
– 10 –
Figure 10-1
CD PLAYER SECTION
Perform steps 1, 2, 3, 10,11, and 12 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the T/T rotate motor
(See Figs. 10-1)
(See Figs. 10-1)
1. Remove the screws (A1) x 2 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
motor.
(A1)x2
ø2.4x3mm
ø2.4x3mm
(A3)x2
ø3x10mm
ø3x10mm
(A2)x1
Loading Tray
(Bottom View)
(Bottom View)
Loading Tray
T/T Motor PWB
T/T Rotate Motor
(B1)x2
ø2.4x5mm
ø2.4x5mm
Up/Down Loading Motor
CD Player Unit
(B2)x1
Figure 10-2
How to remove the up/down loading motor
(See Figs. 10-2)
(See Figs. 10-2)
1. Remove the screws (B1) x 2 pcs.
2. Remove the belt (B2) x 1 pc.
2. Remove the belt (B2) x 1 pc.
How to remove the CD mechanism unit
(See Fig. 10-3)
(See Fig. 10-3)
Perform steps 1, 2, 3, 10and 13 of the disassembly method to
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
unit.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 10-3
Holder
CD Mechanism Unit
Holder
PWB
PWB
(C1)x4
ø2.5x10mm
ø2.5x10mm
CD-E250E
CD-E550E
– 10 –
Figure 10-1
CD PLAYER SECTION
Perform steps 1, 2, 3, 10,11, and 12 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the T/T rotate motor
(See Figs. 10-1)
(See Figs. 10-1)
1. Remove the screws (A1) x 2 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
motor.
(A1)x2
ø2.4x3mm
ø2.4x3mm
(A3)x2
ø3x10mm
ø3x10mm
(A2)x1
Loading Tray
(Bottom View)
(Bottom View)
Loading Tray
T/T Motor PWB
T/T Rotate Motor
(B1)x2
ø2.4x5mm
ø2.4x5mm
Up/Down Loading Motor
CD Player Unit
(B2)x1
Figure 10-2
How to remove the up/down loading motor
(See Figs. 10-2)
(See Figs. 10-2)
1. Remove the screws (B1) x 2 pcs.
2. Remove the belt (B2) x 1 pc.
2. Remove the belt (B2) x 1 pc.
How to remove the CD mechanism unit
(See Fig. 10-3)
(See Fig. 10-3)
Perform steps 1, 2, 3, 10and 13 of the disassembly method to
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
unit.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 10-3
Holder
CD Mechanism Unit
Holder
PWB
PWB
(C1)x4
ø2.5x10mm
ø2.5x10mm
Display