Sharp CD-E250 (serv.man8) Service Manual ▷ View online
– 9 –
CD-E250E
CD-E550E
Figure 9-1
How to remove the flywheel (TAPE 1,2)
(See Fig. 9-1.)
(See Fig. 9-1.)
1. Remove the stop washer (H1) x 1 pc., with a small precision
screwdriver to extract the flywheel from the capstan metal.
Note:
When the stop washer is deformed or damaged, replace it
with a new one.
When the stop washer is deformed or damaged, replace it
with a new one.
How to reinstall the parts
Install each part in the reverse order of the removal with care.
TAPE 1
TAPE 2
Stop
Washer
Washer
Driver
(H1)x1
Stop Washer
Stop Washer
Mechanism
Chassis
Chassis
Washerx2
Flywheel
How to remove the tape mechanism PWB
(TAPE 1,2) (See Fig. 9-2.)
(TAPE 1,2) (See Fig. 9-2.)
1. Remove the screw (J1) x 1 pc., to remove the tape
mechanism PWB.
2. Remove the screw (J2) x 1 pc.
3. Remove the solder joints (J3) x 2 pcs., to remove the tape
3. Remove the solder joints (J3) x 2 pcs., to remove the tape
mechanism PWB.
Figure 9-2
TAPE 1,2
Tape
Mechanism
PWB
Mechanism
PWB
Tape
Mechanism
PWB
Mechanism
PWB
(J3)x2
Solder
Joint
Solder
Joint
(J2)x1
ø2x8mm
ø2x8mm
(J1)x1
ø2x3mm
ø2x3mm
CD-E250E
CD-E550E
– 10 –
Figure 10-1
CD PLAYER SECTION
Perform steps 1, 2, 3, 10,11, and 12 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the T/T rotate motor
(See Figs. 10-1)
(See Figs. 10-1)
1. Remove the screws (A1) x 2 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
motor.
(A1)x2
ø2.4x3mm
ø2.4x3mm
(A3)x2
ø3x10mm
ø3x10mm
(A2)x1
Loading Tray
(Bottom View)
(Bottom View)
Loading Tray
T/T Motor PWB
T/T Rotate Motor
(B1)x2
ø2.4x5mm
ø2.4x5mm
Up/Down Loading Motor
CD Player Unit
(B2)x1
Figure 10-2
How to remove the up/down loading motor
(See Figs. 10-2)
(See Figs. 10-2)
1. Remove the screws (B1) x 2 pcs.
2. Remove the belt (B2) x 1 pc.
2. Remove the belt (B2) x 1 pc.
How to remove the CD mechanism unit
(See Fig. 10-3)
(See Fig. 10-3)
Perform steps 1, 2, 3, 10and 13 of the disassembly method to
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
unit.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 10-3
Holder
CD Mechanism Unit
Holder
PWB
PWB
(C1)x4
ø2.5x10mm
ø2.5x10mm
CD-E250E
CD-E550E
– 10 –
Figure 10-1
CD PLAYER SECTION
Perform steps 1, 2, 3, 10,11, and 12 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the T/T rotate motor
(See Figs. 10-1)
(See Figs. 10-1)
1. Remove the screws (A1) x 2 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
motor.
(A1)x2
ø2.4x3mm
ø2.4x3mm
(A3)x2
ø3x10mm
ø3x10mm
(A2)x1
Loading Tray
(Bottom View)
(Bottom View)
Loading Tray
T/T Motor PWB
T/T Rotate Motor
(B1)x2
ø2.4x5mm
ø2.4x5mm
Up/Down Loading Motor
CD Player Unit
(B2)x1
Figure 10-2
How to remove the up/down loading motor
(See Figs. 10-2)
(See Figs. 10-2)
1. Remove the screws (B1) x 2 pcs.
2. Remove the belt (B2) x 1 pc.
2. Remove the belt (B2) x 1 pc.
How to remove the CD mechanism unit
(See Fig. 10-3)
(See Fig. 10-3)
Perform steps 1, 2, 3, 10and 13 of the disassembly method to
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
unit.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 10-3
Holder
CD Mechanism Unit
Holder
PWB
PWB
(C1)x4
ø2.5x10mm
ø2.5x10mm
CD-E250E
CD-E550E
– 10 –
Figure 10-1
CD PLAYER SECTION
Perform steps 1, 2, 3, 10,11, and 12 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the T/T rotate motor
(See Figs. 10-1)
(See Figs. 10-1)
1. Remove the screws (A1) x 2 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T rotate
motor.
(A1)x2
ø2.4x3mm
ø2.4x3mm
(A3)x2
ø3x10mm
ø3x10mm
(A2)x1
Loading Tray
(Bottom View)
(Bottom View)
Loading Tray
T/T Motor PWB
T/T Rotate Motor
(B1)x2
ø2.4x5mm
ø2.4x5mm
Up/Down Loading Motor
CD Player Unit
(B2)x1
Figure 10-2
How to remove the up/down loading motor
(See Figs. 10-2)
(See Figs. 10-2)
1. Remove the screws (B1) x 2 pcs.
2. Remove the belt (B2) x 1 pc.
2. Remove the belt (B2) x 1 pc.
How to remove the CD mechanism unit
(See Fig. 10-3)
(See Fig. 10-3)
Perform steps 1, 2, 3, 10and 13 of the disassembly method to
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
remove the CD mechanism.
1. Remove the screws (C1) x 4 pcs., to remove the mechanism
unit.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 10-3
Holder
CD Mechanism Unit
Holder
PWB
PWB
(C1)x4
ø2.5x10mm
ø2.5x10mm
Display