DOWNLOAD Sharp CD-E250 (serv.man17) Service Manual ↓ Size: 313.38 KB | Pages: 4 in PDF or view online for FREE

Model
CD-E250 (serv.man17)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
313.38 KB
Type
PDF
Document
Service Manual
Brand
Device
Audio / System / Troubleshooting
File
cd-e250-sm17.pdf
Date
PREV: Sharp CD-E250 (serv.man16) Service Manual

Sharp CD-E250 (serv.man17) Service Manual ▷ View online

– 47 –
CD-E250E
CD-E550E
T
T
FDO
SPDO
Stopped
CH1=200 mV
DC   10:1
CH2=500 mV
DC   10:1
500 ms/div
1999/04/07  09:51:15
(500 ms/div)
NORM:20 kS/s
2
1
=Record Length=
Smoothing :   ON
CH1  :      0.000 V
CH2  :      0.000 V
Main  :      100 K
Zoom  :         2 K
Mode  :   NORMAL
Type   :   EDGE CH2
Delay  :               2.924 ms
Hold off  :                0.2 
µ
s
CH3  :        0.00 V
CH4  :        0.00 V
BW   : FULL
=Trigger=
=Filter=
=Offset=
T
T
TE
DRF
Stopped
CH1=10 V
DC   10:1
CH2=1 V
DC   10:1
100 ms/div
(100 ms/div)
NORM:100 kS/s
2
1
=Record Length=
Smoothing :   ON
CH1  :           0.0 V
CH2  :         0.00 V
Main  :      100 K
Zoom  :         2 K
Mode  :   NORMAL
Type   :   EDGE CH1
Delay  :               2.924 ms
Hold off  :                0.2 
µ
s
CH3  :         0.00 V
CH4  :         0.00 V
BW   : FULL
=Trigger=
=Filter=
=Offset=
The tracking servo is not activated.
Check the peripheral circuits at pins 14, 15 and 20 on IC401, and
FC401.
If the waveform shown in Figure 47-1 appears and soon after
NO DISC appears ?
(2) Tracking system check.
Check the TE waveform at pin 15 on IC401.
A normal jump operation cannot be completed or the beginning of
the track cannot be found.
Check the around pin 20 on IC401.
"Initialization" is possible, but play is not possible ?
Data cannot be read. Check the VCO-PLL (Pin73~78 on IC401)
system.
"Initialization" is not possible.
Figure 47-1
Figure 47-2
Press the OPEN/CLOSE switch without inserting a disc, and
then try starting the play operation.
(3) Spin system check.
The spin driver circuit is OK.
1. The turntable rotates a little ?
(Waveform drawing Figure 47-2)
Check around pin 22 on IC401, pins 10 and 11 on IC402, and
CNS402.
2. The turntable doesn't rotate.
No
Yes
No
Yes
Yes
No
CD-E250E
CD-E550E
– 48 –
T
T
DOUT
Stopped
CH1=2 V
DC   10:1
500 ns/div
1999/04/07  09:25:28
(500 ns/div)
NORM:200 MS/s
1
=Record Length=
Smoothing :   ON
CH1  :        0.00 V
CH2  :        0.00 V
Main  :         1 K
Zoom  :      100
Mode  :   NORMAL
Type   :   EDGE CH1
Delay  :               2.887 ms
Hold off  :                0.2 
µ
s
CH3  :        0.00 V
CH4  :        0.00 V
BW   : FULL
=Trigger=
=Filter=
=Offset=
T
FDO
PDO2
PDO1
Stopped
CH1=500 mV
DC   10:1
CH3=1 V
DC   10:1
CH4=1 V
DC   10:1
500 ms/div
(500 ms/div)
NORM:20 kS/s
1
4
3
=Record Length=
Smoothing :   ON
CH1  :      0.000 V
CH2  :          0.0 V
Main  :      100 K
Zoom  :         2 K
Mode  :   AUTO
Type   :   EDGE CH2
Delay  :                    0.0 ns
Hold off  :                0.2 
µ
s
CH3  :        0.00 V
CH4  :        0.00 V
BW   : FULL
=Trigger=
=Filter=
=Offset=
CH1
  v/DIV
  500 mV
1999/04/05  17:33:17
Is pin 52 (C2F) on IC401 "L" ?
Yes
No
The HF waveform is normal and the time is displayed
normally, but no sound is produced. Or the sound
has dropouts.
(5) Others.
There are too many error flags on a damaged disc which
makes error correction impossible.
Check again using a known good disc.
1. When playing at normal speed.
Check the peripheral circuit at pin 39 (DOUT) on IC401 and
the waveform (Figure 48-2).
If OK, Check the unit.
When a disc is loaded, start play operation.
The HF waveform is normal, but the TOC data cannot be
read.
Check the PDO waveform. (Figure 48-1)
Check around pins 73~78 on IC401.
Figure 48-1
Figure 48-2
CD-E250E
CD-E550E
– 48 –
T
T
DOUT
Stopped
CH1=2 V
DC   10:1
500 ns/div
1999/04/07  09:25:28
(500 ns/div)
NORM:200 MS/s
1
=Record Length=
Smoothing :   ON
CH1  :        0.00 V
CH2  :        0.00 V
Main  :         1 K
Zoom  :      100
Mode  :   NORMAL
Type   :   EDGE CH1
Delay  :               2.887 ms
Hold off  :                0.2 
µ
s
CH3  :        0.00 V
CH4  :        0.00 V
BW   : FULL
=Trigger=
=Filter=
=Offset=
T
FDO
PDO2
PDO1
Stopped
CH1=500 mV
DC   10:1
CH3=1 V
DC   10:1
CH4=1 V
DC   10:1
500 ms/div
(500 ms/div)
NORM:20 kS/s
1
4
3
=Record Length=
Smoothing :   ON
CH1  :      0.000 V
CH2  :          0.0 V
Main  :      100 K
Zoom  :         2 K
Mode  :   AUTO
Type   :   EDGE CH2
Delay  :                    0.0 ns
Hold off  :                0.2 
µ
s
CH3  :        0.00 V
CH4  :        0.00 V
BW   : FULL
=Trigger=
=Filter=
=Offset=
CH1
  v/DIV
  500 mV
1999/04/05  17:33:17
Is pin 52 (C2F) on IC401 "L" ?
Yes
No
The HF waveform is normal and the time is displayed
normally, but no sound is produced. Or the sound
has dropouts.
(5) Others.
There are too many error flags on a damaged disc which
makes error correction impossible.
Check again using a known good disc.
1. When playing at normal speed.
Check the peripheral circuit at pin 39 (DOUT) on IC401 and
the waveform (Figure 48-2).
If OK, Check the unit.
When a disc is loaded, start play operation.
The HF waveform is normal, but the TOC data cannot be
read.
Check the PDO waveform. (Figure 48-1)
Check around pins 73~78 on IC401.
Figure 48-1
Figure 48-2
CD-E250E
CD-E550E
– 48 –
T
T
DOUT
Stopped
CH1=2 V
DC   10:1
500 ns/div
1999/04/07  09:25:28
(500 ns/div)
NORM:200 MS/s
1
=Record Length=
Smoothing :   ON
CH1  :        0.00 V
CH2  :        0.00 V
Main  :         1 K
Zoom  :      100
Mode  :   NORMAL
Type   :   EDGE CH1
Delay  :               2.887 ms
Hold off  :                0.2 
µ
s
CH3  :        0.00 V
CH4  :        0.00 V
BW   : FULL
=Trigger=
=Filter=
=Offset=
T
FDO
PDO2
PDO1
Stopped
CH1=500 mV
DC   10:1
CH3=1 V
DC   10:1
CH4=1 V
DC   10:1
500 ms/div
(500 ms/div)
NORM:20 kS/s
1
4
3
=Record Length=
Smoothing :   ON
CH1  :      0.000 V
CH2  :          0.0 V
Main  :      100 K
Zoom  :         2 K
Mode  :   AUTO
Type   :   EDGE CH2
Delay  :                    0.0 ns
Hold off  :                0.2 
µ
s
CH3  :        0.00 V
CH4  :        0.00 V
BW   : FULL
=Trigger=
=Filter=
=Offset=
CH1
  v/DIV
  500 mV
1999/04/05  17:33:17
Is pin 52 (C2F) on IC401 "L" ?
Yes
No
The HF waveform is normal and the time is displayed
normally, but no sound is produced. Or the sound
has dropouts.
(5) Others.
There are too many error flags on a damaged disc which
makes error correction impossible.
Check again using a known good disc.
1. When playing at normal speed.
Check the peripheral circuit at pin 39 (DOUT) on IC401 and
the waveform (Figure 48-2).
If OK, Check the unit.
When a disc is loaded, start play operation.
The HF waveform is normal, but the TOC data cannot be
read.
Check the PDO waveform. (Figure 48-1)
Check around pins 73~78 on IC401.
Figure 48-1
Figure 48-2
Display

Sharp CD-E250 (serv.man17) Service Manual ▷ Download

  • DOWNLOAD Sharp CD-E250 (serv.man17) Service Manual ↓ Size: 313.38 KB | Pages: 4 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp CD-E250 (serv.man17) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp CD-E250 (serv.man17) System. Information contained in Sharp CD-E250 (serv.man17) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.

Found More:

CD-E250 (serv.man17) Service Manuals

Preview DownloadPagesSize
CD-E250 (serv.man10) Test mode Service Manual 4 48.08 KB
CD-E250 (serv.man19) FL display Service Manual 2 33.57 KB
CD-E250 (serv.man18) Function table of IC Service Manual 6 66.54 KB
CD-E250 (serv.man16) Voltage Service Manual 1 18.27 KB
CD-E250 (serv.man15) Printed wiring board Service Manual 10 1.09 MB
CD-E250 (serv.man14) Schematic diagram Service Manual 12 666.03 KB
CD-E250 (serv.man13) Block diagram Service Manual 4 99.68 KB
CD-E250 (serv.man12) Waveforms of CD circuit Service Manual 1 330.34 KB
CD-E250 (serv.man11) Notes on schematic diagram types of transistor and LED Service Manual 1 14.27 KB
CD-E250 (serv.man9) Adjustment Service Manual 1 16.41 KB
CD-E250 (serv.man8) Removing and reinstalling the main parts Service Manual 3 67.21 KB
CD-E250 (serv.man7) Disassembly Service Manual 2 142.81 KB
CD-E250 (serv.man6) Names of parts Service Manual 2 176.8 KB
CD-E250 (serv.man5) Safety precautions and important servicing notes Service Manual 1 62.42 KB
CD-E250 (serv.man4) Contents Service Manual 1 192.27 KB
CD-E250 (serv.man20) Service Manual 68 3.52 MB
CD-E250 User Manual / Operation Manual 32 1.19 MB
CD-E250 (serv.man2) Replacement Service Manual / Parts Guide 7 51.29 KB
CD-E250 (serv.man3) Exploded views and packing method Service Manual / Parts Guide 5 203.45 KB
CD-E250 (serv.man21) Service Manual / Specification 1 16.22 KB
CD-E250 (serv.man22) Parts addition (CD Cushions) Service Manual / Technical Bulletin 1 38.57 KB
CD-E250 (serv.man23) Corrected part number for the FF REW belt. Service Manual / Technical Bulletin 1 5.79 KB

RANDOM: