DOWNLOAD Sharp CD-DVD500 (serv.man22) Service Manual ↓ Size: 7.22 MB | Pages: 112 in PDF or view online for FREE

– 25 –

Enter test mode 5.

TAPE test mode is displeyd.

Eg: TA TEST1

Press the <       > key or 

the remote control’s

 <T1_PLAY> or <T2_PLAY> key.

T1 PLAY starts. Display

changes to T1 PLAY.

Eg: TA TEST2

T2 F PLAY starts. Display

changes to T2 PLAY 

Eg: TA TEST6

Is it 'AUTO STOP' performed

within 13 sec.?

Is it 'AUTO STOP' performed

within 13 sec.?

Is it 'AUTO STOP' performed

within 13 sec.?

Is it 'AUTO STOP' performed

within 10 sec.?

Is it 'AUTO STOP' performed

within 10 sec.?

T2 R PLAY starts. Display

changes to T2 PLAY.

Eg: TA TEST21

T2 REW starts. Display changes

to T2 REW. Eg: TA

TEST4

T2 FF starts. Display changes

to T2 FF display. Eg: TA

TEST5

 'OK' is displayd. Eg: TA

TEST6

Yes

Yes

Yes

Yes

Yes

Yes

Normally, an operation confirmation mode
functions after entering each operation mode.
When each operation mode cannot be entered,
the STOP operation will be performed and “NG” 
will be displayed.

After performing the STOP operation, 

‘NG’ is displayed.

Eg: TA TEST7

No

No

No

No

No

If T2 FF cannot be confirmed

If T2 REW cannot be confirmed

If T2 R PLAY cannot be confirmed

If T2 F PLAY cannot be confirmed

If T1 PLAY cannot be confiemed

It takes 6 sec. to
detect AUTO
STOP

It take 6 sec. to
detect AUTO
STOP

Need  3 sec. to
detect AUTO
STOP

•  This is a test mode for producing CD-DVD500H. Do not use except when servicing.
Function: - TAPE test mode.

– 26 –

Function:

- Software RESET.
- All the function conditions will be initialized.
- It will jump to A operation in case of power ON.
- After displaying "CLEAR ALL", power will be turnd off.
- Forwarding condition set for CD changer.
- Forwarding condition set for TAPE mechanism.

"CLEAR_AL" display

•  This is a test mode for producing CD-DVD500H. Do not use except when servicing.

Function: AUDIO CIRCUIT TEST

a) 

The volume steps can be set to 3 levels, i.e. low, medium, and high.

Initial settings of TEST MODE 7

1. Volume

: Step 1 (-16dB)

2. Preset G-EQ.

: FLAT

3. X-Bass

: OFF

4. Function

: TEST FUNCTION

Set the volume levels to the following 3 steps and turn the power on.
Other operations will work normally.

C

L

L

E

A

A

R

0

0

0

-

∞

1

16

16

-30dB

2

31

MAXIMUM

0dB

CTRIM

-10

0

+10

STRIM

-10

0

+10

– 27 –

Function: The SET will be set to "shipping condition". (Right after the shipment from the factory)

- All the functions and conditions are initialized.
- CLEAR ALL TUNER PRESET MEMORY
- CLOCK INITIAL
- CLEAR CD MEMORY
- DVD MEMORY RESET
- Initialize the CD changer mechanism and compact cassette mechanism.
- For CD changer mechanism, set it in upward condition.

When initialize the mechanism, it will display "WAIT" and will not accept any changes by key input.

After "shipping condition" setting is completed, "FINISED" is display and any key input will be disenabled.

If there are any troubles and "shipping condition" cannot be set, "ERR" will be displayed.

"WAIT" display

"FINISHED" display

W

A

I

T

N

I

F

I

S

H

E

D

– 28 –

•  This is a test mode for producing CD-DVD500H. Do not use except when servicing.

Function: CD CHANGER AGING TEST MODE

START

" > "KEY

TRAY OPEN

DISC SKIP

DISC SKIP

DISC SKIP

TRAY CLOSE

DISC X PLAY

DISC SKIP

DISC SKIP

DISC Y PLAY

DISC Z PLAY

IF AN ERROR OCCURS,
ENTER THE ERROR MODE.

•  This is a test mode for producing CD-DVD500H. Do not use except when servicing.

Function: MOVING VOLUME TEST MODE

START

1 SEC WAIT

1 SEC WAIT

MOVING VOL.

PWR ON MODE

MOVING VOL.

PWR OFF MODE

FL COUNT UP

EXAMPLE:

FL DISPLAY

1

9

9

9

9

9

9

9

9

COUNT UP

~