DOWNLOAD Sharp CD-DP2500 (serv.man9) Service Manual ↓ Size: 12.72 KB | Pages: 1 in PDF or view online for FREE

Model
CD-DP2500 (serv.man9)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
12.72 KB
Type
PDF
Document
Service Manual
Brand
Device
Audio / System / Test mode details
File
cd-dp2500-sm9.pdf
Date

Sharp CD-DP2500 (serv.man9) Service Manual ▷ View online

CD-DP2500H
– 18 –
Yes
Yes
Comparing freg.
same or not?
Between current receiving
frequency and (already)
previously memorized
frequency.
Hold down the ASPM button for 3 more second.
No operate. After displayed “END”. Return to
previous station.
“ASPM” blinks in the display.
Begin to scan start 87.50 
 108.00 MHz
Preset CH memory full over?
SD (TUNE) DET out OK?
Yes
No
No
No
No
No
If count 1st OK?
Yes
If count 2nd OK?
Yes
RDS signal or not?   PI—identify
Yes
Comparing PI cord
same or not?
between current receiving
PI and before PI which is
already memorized by
ASPM on this time.
Yes
Yes
No
Comparing freg.
same or not?
between current receiving
frequency and (already)
previouslymemorized
frequency.
No
Memorized to the lowest vacant
preset channel.
No
Memorized to the lowest vacant
preset channel.
Compare the field
strength of current receiving
signal.
Is receiving signal stronger than
signal which has same PI cord
and is already memorized to
preset memory ahead of this
receiving time?
No effect
No effect
No effect
Effect
Pass
No effect
Pass
No effect
Pass
No effect
Pass
No effect
Displayed the TTL quantity of memorized
stations by ASPM operation on this time.
And return to the previous
receiving freq. automatically. 
Begin to ASPM SCAN from the next
CH-SPAN again.
Repeat and continue with same format
ASPM operation untill 108 MHz.
After reached 108 MHz, displayed the TTL
quantity of memorized stations.
And return to the previous receiving freq.
automatically.
Preset CH memory become full over?
Yes
No
ASPM, summary operation
TEST MODE
RDS OPERATION
There is no RDS (Radio Data System) broadcasting service in Australia and New Zealand.
KEY
TEST MODE
CONTENTS
[ON/STAND-BY] [TUNER] + [X-BASS]
TEST 1
TUNER PRESET MEMORY CLEAR
[ON/STAND-BY] [MEMORY/SET] + [X-BASS]
TEST 2
TUNER PRESET FOR PRODUCTION
[ON/STAND-BY] [>>] + [X-BASS]
TEST 3
KEY AND DISPLAY TEST
[ON/STAND-BY] [CD] + [X-BASS]
TEST 4
CD TEST MODE
[ON/STAND-BY] [TAPE] + [X-BASS]
TEST 5
TAPE TEST MODE
[ON/STAND-BY] [>] + [X-BASS]
TEST 6
ALL CLEAR(RESET)
[ON/STAND-BY] [TUN UP] + [X-BASS]
TEST 7
AUDIO TEST
[ON/STAND-BY] [TUN DOWN] + [X-BASS]
TEST 8
PRODUCTION INITIALIZE FOR CHANGER
[ON/STAND-BY] [STOP] + [X-BASS]
TEST 10
RDS TEST
During POWER OFF mode,push below each 2 keys [ON/STAND-BY] key.
Then go to each TEST MODE.
Display

Sharp CD-DP2500 (serv.man9) Service Manual ▷ Download

  • DOWNLOAD Sharp CD-DP2500 (serv.man9) Service Manual ↓ Size: 12.72 KB | Pages: 1 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp CD-DP2500 (serv.man9) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp CD-DP2500 (serv.man9) System. Information contained in Sharp CD-DP2500 (serv.man9) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.