DOWNLOAD Sharp CD-DP2400H Service Manual ↓ Size: 1.65 MB | Pages: 32 in PDF or view online for FREE

Model
CD-DP2400H
Pages
32
Size
1.65 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio / System
File
cd-dp2400h.pdf
Date

Sharp CD-DP2400H User Manual / Operation Manual ▷ View online

30
CD-DP2400H(E)3.fm
01/7/17
CD-DP2400H
Re
fe
re
nces
- T
roub
le
s
h
o
o
ting c
h
a
rt / M
a
inte
na
nc
e
 -
Troubleshooting chart (continued)
!
If trouble occurs
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and plug in the unit,
and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
 
 
!
Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by mode.
2
Whilst pressing down the   /   button and the X-BASS/DEMO button, press the
ON/STAND-BY button until "CLEAR AL" appears.
 
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.
 
 
!
Before transporting the unit
Maintenance
!
Cleaning the tape-handling parts
"
Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean
these parts with a cotton swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.
"
When cleaning the heads, pinch rollers, etc., unplug the unit which contains high
voltages.
"
After long use, the deck's heads and capstans may become magnetised, causing
poor sound. Demagnetise these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser. Read the demagnetiser's
instructions carefully before use.
 
!
Cleaning the cabinet
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the   OPEN/CLOSE button to open the disc tray.
Remove all CDs inserted in the unit.
4
Press the   OPEN/CLOSE button to close the disc tray.
Make sure that "NO DISC" is displayed.
5
Press the ON/STAND-BY button to enter the stand-by mode, and then unplug 
the AC power lead from the wall socket.
 Playback 
head
Erase 
head
Capstan
Recording/Playback head
Pinch roller
Periodically wipe the cabinet with a soft cloth and a diluted 
soap solution, then with a dry cloth.
 
Caution:
"
Do not use chemicals for cleaning (petrol, paint thinner, 
etc.). It may damage the cabinet finish.
"
Do not apply oil to the inside of the unit. It may cause 
malfunctions.
TAPE 1
TAPE 2
A
C
C
D
E
B
B
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
31
CD-DP2400H(E)3.fm
01/7/17
CD-DP2400H
Re
fe
re
nces
- S
p
eci
fi
cat
io
n
s
 -
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
!
General
!
Amplifier
!
CD player
!
Tuner
!
Cassette deck
!
Front speaker
!
Centre speaker
!
Surround speaker
Power source
AC 230 V, 50 Hz
Power consumption
108 W
Dimensions
Width: 270 mm (10-5/8") 
Height: 330 mm (13") 
Depth: 332 mm (13-1/16")
Weight
8.0 kg (17.6 lbs.)
Output power
Front speakers:
RMS: 60 W (30 W + 30 W) (10 % T.H.D.)
RMS: 46 W (23 W + 23 W) (0.9 % T.H.D.)
Centre speaker:
RMS: 20 W (10 % T.H.D.)
RMS: 16 W (0.9 % T.H.D.)
Surround speakers:
RMS: 20 W (10 W + 10 W) (10 % T.H.D.)
RMS: 16 W (8 W + 8 W) (0.9 % T.H.D.)
Output terminals
Front speakers: 6 ohms
Centre speaker: 6 ohms
Surround speakers: 12 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 kohms
Type
3-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Frequency response
50 - 14,000 Hz (Normal tape)
Signal/noise ratio
55 dB (TAPE 1, playback) 
50 dB (TAPE 2, recording/playback)
Wow and flutter
0.3 % (WRMS)
Type
2-way type speaker system
5 cm (2") Tweeter
13 cm (5-1/4") Woofer
Maximum input power 60 W
Rated input power
30 W
Impedance
6 ohms
Dimensions
Width: 220 mm (8-11/16") 
Height: 330 mm (13") 
Depth: 217 mm (8-9/16")
Weight
3.0 kg (6.6 lbs.)/each
Type
10 cm (4") full-range speaker
Maximum input power 40 W
Rated input power
20 W
Impedance
6 ohms
Dimensions
Width: 260 mm (10-1/4") 
Height: 140 mm (5-1/2") 
Depth: 155 mm (6-1/8")
Weight
0.9 kg (2.0 lbs.)
Type
10 cm (4") full-range speaker
Maximum input power 20 W
Rated input power
10 W
Impedance
12 ohms
Dimensions
Width: 200 mm (7-7/8") 
Height: 93 mm (2-11/16") 
Depth: 170 mm (6-3/4")
Weight
0.5 kg (1.1 lbs.)/each
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
TINSE0392AWZZ
A0107.HK
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace-
ment, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does
not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the product
is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed
Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.
4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batter-
ies.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was
purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect these
rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 08705 274277
0008
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
9906
CDDP2400H(E)_BACK
01.7.17, 17:42
1
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
TINSE0392AWZZ
A0107.HK
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replace-
ment, of this product subject to the conditions listed below:-
1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does
not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the product
is used in the course of a business, trade or profession.
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed
Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.
4. The guarantee does not cover carriage costs, jewelled styli, audio tapes, compact discs or batter-
ies.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was
purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to your statutory rights, and does not affect these
rights in any way.
If you have any difficulty operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 08705 274277
0008
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
9906
CDDP2400H(E)_BACK
01.7.17, 17:42
1
Page of 32
Display

Sharp CD-DP2400H User Manual / Operation Manual ▷ Download