Sharp CD-DP2400E User Manual / Operation Manual ▷ View online
25
CD-DP2400E_3.fm
01/7/17
CD-DP2400E
Ad
v
a
nced
F
e
atures
- Time
r a
n
d
s
le
e
p op
e
ra
tion -
To reset or change the timer setting:
Perform "Timer playback or timer recording" from the beginning.
Notes:
"
Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
The remaining sleep time is displayed for about 5 seconds.
Note:
Once the sleep time is set, it will remain unchanged until a new time is entered.
6
Press the TUNING/TIME ( or ) button to specify the minutes,
then press the MEMORY/SET button.
then press the MEMORY/SET button.
7
The unit will enter the timer stand-by mode automatically.
To cancel the timer playback/timer recording:
Press the ON/STAND-BY button to turn the power on.
8
When the preset time is reached, playback or recording will start.
The volume will increase gradually until it reaches the volume you were listening
at before the system entered the timer stand-by mode.
at before the system entered the timer stand-by mode.
9
In timer playback:
If you select CD or TAPE, the unit will enter the stand-by mode after the play-
back. If you select TUNER, it will enter the stand-by mode one hour after the tim-
er playback starts.
back. If you select TUNER, it will enter the stand-by mode one hour after the tim-
er playback starts.
In timer recording:
When the recording tape reaches its end, the timer recording will end, and the
unit will enter the stand-by mode.
unit will enter the stand-by mode.
!
Once the time is set, the setting will be retained until a new time is entered.
!
When performing timer playback or recording using another unit connected to the
VIDEO/AUX sockets, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or enter the power stand-by mode auto-
matically. It will enter the power stand-by mode when the end of the recording tape
is reached in timer recording or 1 hour after the playback starts in timer playback.
However, another unit will not be turned on or off.
VIDEO/AUX sockets, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or enter the power stand-by mode auto-
matically. It will enter the power stand-by mode when the end of the recording tape
is reached in timer recording or 1 hour after the playback starts in timer playback.
However, another unit will not be turned on or off.
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until "SLEEP" is dis-
played.
played.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME ( or ) button.
(Maximum: 3 hours - Minimum: 1 minute)
!
3 hours - 5 minutes 5-minute intervals
!
5 minutes - 1 minute 1-minute intervals
3
Press the MEMORY/SET button.
4
The system will enter the power stand-by mode automatically after
the preset time has elapsed.
the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
26
CD-DP2400E_3.fm
01/7/17
CD-DP2400E
Ad
v
a
nced
F
e
atures
- Enha
nc
ing y
our
s
y
s
te
m
-
Enhancing your system
The connection lead is not included. Purchase a commercially available lead as
shown below.
shown below.
"
Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
"
To record on a tape
"
Headphones
!
Before plugging in or unplugging the headphones, reduce the volume.
!
Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
!
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME control.
volume using the VOLUME control.
VCR, DVD, etc.
To the
line output
sockets
line output
sockets
Red
RCA lead
(not supplied)
(not supplied)
White
Red
White
1
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC/PAUSE (
) button.
4
Press the / (TAPE 2 ) button.
5
Play the VCR, DVD, etc.
27
CD-DP2400E_3.fm
01/7/17
CD-DP2400E
Ad
v
a
nced
F
e
atures
-
Enjo
y
s
u
rr
ound s
ound -
Enjoy surround sound
"
Dolby Pro Logic Surround (Normal or
Phantom) mode
Phantom) mode
By connecting this unit to other equipment (DVD player, VCR, etc.) with the
trademark and playing it, you can enjoy Dolby Pro Logic Surround
sound.
To listen in the normal or phantom mode:
To cancel the Dolby Pro Logic Surround mode:
Press the DOLBY PRO LOGIC button on the remote control until "BYPASS" appears,
or press the BYPASS button on the main unit.
or press the BYPASS button on the main unit.
Notes:
!
If the EQ (EQUALIZER MODE) button is pressed in the normal or phantom mode,
the unit will switch to the bypass mode automatically.
the unit will switch to the bypass mode automatically.
!
When in the normal or phantom mode, the sound mode will be set to FLAT.
!
You cannot use the Dolby Pro Logic Surround feature with headphones.
!
The selected Dolby Pro Logic Surround mode is automatically stored in memory
and will be used the next time you activate Dolby Pro Logic. This mode is memo-
rised until a new mode is selected.
and will be used the next time you activate Dolby Pro Logic. This mode is memo-
rised until a new mode is selected.
Centre speaker
Normal mode:
Phantom mode:
Front speaker (Left)
Front speaker (Right)
Surround speaker (Right)
Surround speaker (Left)
Front speaker (Left)
Front speaker (Right)
Surround speaker (Right)
Surround speaker (Left)
1
Connect the equipment you want to play (see page 26).
2
Press the VIDEO/AUX button.
3
Press the DOLBY PRO LOGIC button on the remote control to se-
lect the Dolby Pro Logic Surround mode.
lect the Dolby Pro Logic Surround mode.
Each time you press the button, the display will change as follows:
NORMAL:
Sound will be output from the front left, front right, centre, and sur-
round speakers.
round speakers.
PHANTOM:
Unlike the normal mode, no sound is output from the centre
speaker. The centre speaker signal is split equally and added to
the sound from the front speakers.
speaker. The centre speaker signal is split equally and added to
the sound from the front speakers.
BYPASS:
The Dolby Pro Logic Surround mode is cancelled. Sound will only
be output from the front speakers.
be output from the front speakers.
!
You can select the desired surround mode by pressing the NORMAL or
PHANTOM button on the main unit.
PHANTOM button on the main unit.
4
Start playing the sound source.
NORMAL
PHANTOM
BYPASS
28
CD-DP2400E_3.fm
01/7/17
CD-DP2400E
Ad
v
a
nced
F
e
atures
-
Enjo
y
s
u
rr
ound s
ound -
Enjoy surround sound (continued)
To adjust the speaker volume:
To balance the front speakers:
Press the BALANCE button to decrease the right speaker level (the left speaker
level will increase), and press the BALANCE button to decrease the left speaker
level (the right speaker level will increase).
level will increase), and press the BALANCE button to decrease the left speaker
level (the right speaker level will increase).
Notes:
!
Be sure to adjust the sound at your favorite listening position.
!
The volume settings for the centre and surround speakers are stored in memory
for future use. However, after a power failure or unplugging the unit, they will return
to initial settings.
for future use. However, after a power failure or unplugging the unit, they will return
to initial settings.
1
When in the normal or phantom mode, press the TEST TONE but-
ton.
ton.
The test tone will be heard from each speaker, in order, at about 2-second inter-
vals.
vals.
In normal mode:
In phantom mode:
Left (L ch)
Centre (C ch)
Right (R ch )
Surround (S ch )
Left (L ch)
Right (R ch )
Surround (S ch )
2
Adjust the speaker volume level whilst the test tone is being out-
put from the centre or surround speakers.
put from the centre or surround speakers.
To set the centre speaker volume to the level of the front speakers:
When in the normal mode, press the CENTER LEVEL button to increase the
volume and the CENTER LEVEL button to decrease it.
volume and the CENTER LEVEL button to decrease it.
To set the surround speaker volume to the level of the front speak-
ers:
ers:
When in the normal or phantom mode, press the SURROUND LEVEL button
to increase the volume and the SURROUND LEVEL button to decrease it.
to increase the volume and the SURROUND LEVEL button to decrease it.
!
You can change the volume level within the range of +10dB to -10dB, in 1 dB
steps.
steps.
3
After adjusting the speaker volume level, press the TEST TONE
button.
button.
The test tone will stop.
0
-10
-9
+9
+10
...
...
0
-10
-9
+9
+10
...
...
15
1
15
1
Click on the first or last page to see other CD-DP2400E service manuals if exist.